TBS6928 DVB-S2 TV Tuner CI PCIe Card
From LinuxMCE
Revision as of 09:29, 28 March 2012 by TBS (Talk | contribs) (Created page with "TBS6928 PCI-E DVB-S2 TV Tuner CI card is the advanced satellite TV tuner built with Common Interface support, which allows you watching digital satellite TV or downloading data f...")
TBS6928 PCI-E DVB-S2 TV Tuner CI card is the advanced satellite TV tuner built with Common Interface support, which allows you watching digital satellite TV or downloading data from satellite in your computer. The CI slot on the board allows CAM insertion for watching payTV channels. It has updated with the latest kernels for Linux
Contents
Overview/Features
- 1XPCI express slot
- CI slot with CAM insertion
- Linux Support
Components Used
- AV2011(Tuner)
- Tmax TAS2100(Demod)
- SAA7160
Tested CAMs that work with TBS6928
- 1. AlphaCrypt (Mascom)
- 2. Conax (NCAM HD)
- 3. Conax (NP4)
- 4. Conax (SMiT)
- 5. Conax (Technisat)
- 6. Crysto Works (Philips)
- 7. CYFROWY POLSAT (Nagravision)
- 8. DIABLO CAM Ver. 2.3
- 9. Easy TV (Mascom)
- 10. Irdeto (SMiT)
- 11. Irdeto Crystoworks acess (SMiT)
- 12. Irdeto CI+ (Skylink)
- 13. Irdeto HD (SMiT)
- 14. Viaccess (SCM)
- 15. Viaccess (SMiT)
- 16. PowerCAM Pro
All of those CAMs both tested in linux and windows.
Identification
$lspci -v 02:00.0 Multimedia controller: Philips Semiconductors SAA7160 (rev 03) Subsystem: Device 6928:0001 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fd600000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: SAA716x TBS Kernel modules: saa716x_tbs-dvb
Sample Kernel Output
$dmesg [ 11.437079] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.437963] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 11.490496] SAA716x TBS 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.490503] SAA716x TBS 0000:02:00.0: setting latency timer to 64 [ 11.500245] DVB: registering new adapter (SAA716x dvb adapter) [ 11.948803] r8169 0000:04:00.0: eth0: link down [ 11.948810] r8169 0000:04:00.0: eth0: link down [ 11.949046] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.972015] TurboSight TBS 6928 Frontend Attaching... [ 12.674307] TurboSight TBS6928 DVB-S2 card MAC=00:22:ab:e0:23:e2 [ 12.680059] TBS 6928 CI Extention for Adapter 0 attached and CAM inserted: no [ 12.680372] tbsci: Adapter 0 CI initialized [ 12.680375] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6928 DVBS/S
