Automation

From LinuxMCE
Revision as of 12:28, 14 March 2007 by Jerry finn (Talk | contribs)

Jump to: navigation, search
This page was written by Pluto and imported with their permission when LinuxMCE branched off in February, 2007. In general any information should apply to LinuxMCE. However, this page should be edited to reflect changes to LinuxMCE and remove old references to Pluto.
There are several types of automation products available that are compatible with LinuxMCE. Usually, they work by sending signals through the home's power lines.
Sections
Automation Lights Appliances Thermostats Irrigation
X10 X10 Hardware Installation X10 Pluto Configuration X10 Troubleshooting
Insteon Insteon Hardware Installation Insteon Pluto Configuration Insteon Troubleshooting