User:JaseP
From LinuxMCE
JaseP's User Set-up
Network Environment
Micasaverde Vera (external router/primary Z-wave controller) --> Core (LinuxMCE services, incl. DHCP, DCE router, Secondary Z-wave controller, External Hard Drives, Telephony) --> Wired/Wireless Access Points (DHCP server disabled & provided by the Core) --> Media Directors, Orbiters & non-LinuxMCE devices
Hardware
Core:
- System Software: LinuxMCE 10.04 (net install)
- Intel Dual Core w/ Intel GMA graphics
- 4GB RAM
- 2 NICs (one internal, one add-in card)
- 320 GB HD
- 2 HDhomeruns (network attached tuners)
Media Directors:
- 2 Dell Studio Hybrids (Intel Dual Core & 2 & 4 GB RAM, Intel graphics)
- EEE Box 202 (Intel Atom N270, Intel graphics)
- Note: all MDs use Rii Trackpad/Keyboards with IR remote (not Bluetooth models)
External Storage:
- Seagate 1 TB USB HD
- 2 Western Digital 320GB Hard Drives (USB)
Z-wave:
- Micasaverde Vera vers. 1 (with Aeon Labs USB Z-wave inclusion controller)
- 2nd Aeon Labs USB Z-wave inclusion controller (for the Core)
- 2 Z-wave thermostats
- 4 in-wall Z-wave dimmers
- 4 Z-wave appliance modules
- 3 Schlage Z-wave door locks
- 1 Z-wave multi-sensor
- 1 plug-in Z-wave scene controller
- 1 Wayne Dalton Z-wave enabled remote control
- Panasonic IP camera (wired -- included here because it is controlled by the MCV Vera)
Networking:
- Micasaverde Vera (WiFi access point disabled)
- 2 Linksys Wireless/Wired Routers
- 2 Linksys 4-port (5 ports, 4 useable) switches
Telephony:
- Obi110 ATA (not configured)
- Linksys/Cisco SPA3102 ATA (not installed or configured)
Orbiters:
- Web Orbiter(s) -- presently need reconfiguration
Notes
This is a rough outline at present, and will be fleshed out later with diagrams, links, setup details, etc. Please excuse the dust.