TBS5980 QBOX CI DVB-S2 TV Tuner USB2.0
TBS5980 USB DVB-S2 TV Box CI is the high end satellite TV tuner box built with Common Interface support, which allows insertion of CAM and smartcard for encrypting PayTV(By inserting the correct CAM and subscription smartcard into the CI slot, encrypted pay TV will be available). Linux driver up to the latest kernel are provided.
Contents
Overview/Features
- USB 2.0 interface (B-connector)
- Inputs: Antenna (F-connector), remote and CI-slot
- Separate power supply: 7.5V, 3.5A
- Indication LED, mostly red, sometimes blue, meaning yet unknown.
Components Used
- STMicroelectronics STB6100 (tuner)
- STMicroelectronics STV0903 (demodulator)
Identification
lsusb output:
# lsusb -v
Bus 001 Device 009: ID 734c:5980 TBS Technologies China
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x734c TBS Technologies China
idProduct 0x5980
bcdDevice 0.00
iManufacturer 1 TBS-Tech
iProduct 2 DVBS2BOX
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Making it Work
The device is actively supported to run under Linux. Every few months the driver gets updated, and the company actively supports users through a forum. By downloading, compiling and installing the drivers and firmware, the device works (at least, in my distro, Fedora 14 x86-64). Together with the manufacturer-supplied source code for scanning and zapping (slightly modified versions of scan-s2 and szap-s2) DVB-S2 reception works. Newer versions of szap and scan work just as well.
Firmware
The driver software package contains the firmware file: dvb-usb-tbsqbox-id5980.fw. Just install it in /lib/firmware.
Drivers
Available here. Look for the TBS5980 driver. Latest update: july 10. Apart from the firmware file, there is no closed-source object code included in the software. All code has been released under GPLv2.
Sample Kernel Output
The kernel outputs the information below, CAM module inserted (with module verbosity wide open):
# dmesg [18814.387092] usb 1-7: new high speed USB device using ehci_hcd and address 9 [18814.502322] usb 1-7: New USB device found, idVendor=734c, idProduct=5980 [18814.502334] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18814.502343] usb 1-7: Product: DVBS2BOX [18814.502349] usb 1-7: Manufacturer: TBS-Tech [18814.684522] dvb-usb: found a 'TBS Qbox DVB-S2 CI USB2.0' in cold state, will try to load a firmware [18814.688745] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5980.fw' [18814.691532] tbsqbox2ci: start downloading TBSQBOX2CI firmware [18814.810199] dvb-usb: found a 'TBS Qbox DVB-S2 CI USB2.0' in warm state. [18814.810330] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [18814.810751] DVB: registering new adapter (TBS Qbox DVB-S2 CI USB2.0) [18815.048073] dvb-usb: MAC address: xx:xx:xx:xx:xx:xx (edited by me) [18815.048077] [18815.050881] stv090x_attach: Create New Internal Structure! [18815.156679] stv090x_attach: Attaching STV0903 demodulator(1) Cut=0x30 [18815.156689] tbsqbox2ci: Attached stv0903! [18815.156692] [18815.157478] tbsqbox2ci: CI initialized. [18815.157488] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... [18815.157590] stb6100_attach: Attaching STB6100 [18815.159811] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/input/input12 [18815.159952] dvb-usb: schedule remote query interval to 150 msecs. [18815.159961] dvb-usb: TBS Qbox DVB-S2 CI USB2.0 successfully initialized and connected. [18815.160051] usbcore: registered new interface driver tbsqbox2ci [18861.422201] tbsqbox2ci: CI enabled. [18861.422211] dvb_ca adapter 0: DVB CAM detected and initialised successfully
To get maximum verbosity, relevant parts of /etc/modprobe.d/modprobe.conf were set as follows:
options dvb_usb debug=511 options dvb_usb_tbsqbox2ci debug=3 options stb6100 verbose=3 options stv090x verbose=3
Remote Control Support
The device comes with a remote, it works great.
