Serial Port debugging

Debugging serial Port (Com port/RS-232)

You can use minicom (apt-get install minicom)

# minicom

then press ctcl-a z to open the help interface

select 'o'

goto 'Serial port setup'

Set the Serial device to the port you want to test In my case I also had to set:

- Bps/Par/Bits: 9600 8N1
- Hardware Flow Control : No

Exit this screen and then select:

• 'Save setup as dfl'

(this makes this configuration default next time you start minicom)

Exit this screen

then reinitialize the modem (m)

you should enable local echo so you can see what you type.

• ctrl-a e

When you type the command the device should respond.