3M touchscreen

From LinuxMCE
Revision as of 01:36, 28 September 2015 by Phenigma (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Version Status Date Updated Updated By
710 According to category, Works with caveats 11th May 2010 Wierdbeard65
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

Status

available starting with: LinuxMCE 0710 beta 4.

Starting 2008-02-20, there are drivers for 3M touchscreens, like the one implemented in the Planar PM191U 19" monitor.

These drivers are binary-only and only for 32bit machines. 3M did not respond so far regarding a 64bit version.

To install the drivers, run this:

apt-get install 3m-touchware

and reboot the machine.

To calibrate the screen, run /TWCalib/TwCalib inside X.

Caveats

The serial pnp detection scripts sometime interfere with the touchscreen and make it stuck shortly after the devices are launched. Until the detection is fixed you can edit "/usr/pluto/bin/ListAvailableSerialPorts.sh" to _not_ spit out the device file where the 3m is connected.