Difference between revisions of "Audio over HDMI"

From LinuxMCE
Jump to: navigation, search
m
Line 1: Line 1:
 
[[Category:Documentation]]
 
[[Category:Documentation]]
 
[[Category:Audio]]
 
[[Category:Audio]]
 
+
{{versioninfo}}
 
(Also see notes on the [[LinuxMCE-0810 alpha2]] page)
 
(Also see notes on the [[LinuxMCE-0810 alpha2]] page)
  

Revision as of 09:38, 1 May 2010

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

(Also see notes on the LinuxMCE-0810 alpha2 page)

That article is started to help people get audio over HDMI. Feel free to post here your experience!

Generally it's possible with kernel 2.6.27 and ALSA 1.0.18. A few notes here. First of all, note that DVI port support video signal only. It's possible to inject audio signal to external video card from the S/PDIF using SPDIF_HDMI headers. Usually integrated video card with HDMI port have possibility to pass audio as well.

nVidia

nVidia doesn't provide a separate card for HD. Instead of that it offers a separate device:

linuxmce@dcerouter:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC883 Digital [ALC883 Digital]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
linuxmce@dcerouter:~$ aplay -L
default:CARD=NVidia
   HDA NVidia, ALC888 Analog
   Default Audio Device
front:CARD=NVidia,DEV=0
   HDA NVidia, ALC888 Analog
   Front speakers
surround40:CARD=NVidia,DEV=0
   HDA NVidia, ALC888 Analog
   4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
   HDA NVidia, ALC888 Analog
   4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
   HDA NVidia, ALC888 Analog
   5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
   HDA NVidia, ALC888 Analog
   5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
   HDA NVidia, ALC888 Analog
   7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=NVidia,DEV=0
   HDA NVidia
   HDMI Audio Output
null
   Discard all samples (playback) or generate zero samples (capture)

If you don't see HDA NVidia in the aplay -L output that means you card is not recognized by system correctly. Here is a correct output of lspci:

lspci -v
(only the relevant portion):
00:07.0 Audio device: nVidia Corporation MCP78S [GeForce 8200] High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82fe
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

The alsamixer should should three digital devices: IEC958, IEC958 D and ICE9581. All of them should be unmuted. Then select 'HDA NVidia NVIDIA HDMI (ALSA)' as output for all items in 'Sound Prefrences' and select 'HDA NVidia (Alsa mixer)' as the mixer.

After that audio over HDMI should work.

EDITED (geekyhawkes) It might be necessary to create an /etc/asound.conf file to "forward" the audio to your HDMI port. Details of the asound.conf file i am using can be found here[1]

Test

To test your HDMI output run following command:

aplay -D plug:hdmi /usr/share/sounds/KDE_Window_Open.wav

Replace KDE_Window_Open.wav by any other WAV file. You should use plug to convert mono sample to stereo.

ATI

Usually integrated ATI video cards come with separated HD sound card (for example, integrated ATI RadeonTM 1250). Sound over HDMI works fine with the latest Catalyst drivers.

See Also