Backup and Restore

From LinuxMCE
Jump to: navigation, search
This article needs to be fixed and/or categorized.
Please contribute by fixing this article or other that needs to be fixed.


LinuxMCE 0704 includes a new mechanism to automatically update itself.

Update from LinuxMCE 1.0 or Pluto to LinuxMCE 0704

LinuxMCE 1.0 and Pluto versions cannot be directly upgraded to LinuxMCE 0704.

However by following the process listed below, you can make a backup of your configuration settings before you install LinuxMCE 0704. Save this backup on a CD (or on another PC). Then install 0704 (which will clean out the hard drive and do a fresh install). Then restore the backup. LinuxMCE 0704 will recognize that it is restoring a backup from a prior version and will import the data.

Backup and Restore process

You can back-up your system and later restore it to that earlier configuration. The process works by saving a file and then later restore it. That file contains icons for users, rooms, scenarios and floor plans, devices list and settings for each; which are restored using a database dump.

How it works

Using web-admin site go to the Upper menu > Advanced > Configuration > Backups To create a restore point you have to press 'Backup' and then save the file somewhere safe. Remember: download the backup and save it to another pc. Don't let it on your Linux MCE machine because you'll lose it. Later after reinstalling the system or in case of failure you can restore the system to that previous state.

Use 'Browse' button to locate the backup file and then press 'Restore'.

At this time there is a note what tells me that I have to reboot the system i order to install my configuration. 'Backup file uploaded, please reboot the machine and be patient, since it will take longer than a normal reboot.'

Reboot the machine and wait for the whole process to finish. After the interface loads you should see your icons and floor plans.

I used the restore successfully from a Pluto 2.0.0.44 to a LINUX MCE 1.1. What it didn't restore was the bookmarks created for media and the play lists.

The restore from LINUX MCE 1.0 to LINUX MCE 1.1 was not complete. I have all the devices working but it didn't restore my icons for users, rooms and floor plans; and neither the bookmarks and play lists.

Note
If you use 192.168.80.1 for Pluto 2.0.0.44 or Linux MCE 1.0 internal network address and you later installed Linux MCE 1.1 with 192.168.80.1 you don't need to do anything else.
If you use on internal network an address not like 192.168.80.1, (i.e. 192.168.86.1) you need to go to Upper menu > Advanced > Network > Settings and hit 'update' button. I installed Pluto 2.0.0.44 and Linux MCE 1.0 with 192.168.80.1 but I used 192.168.86.1 instead when I installed the Linux MCE 1.1 and I got TFTP timeout when booting the media directors.