Backup and Restore

From LinuxMCE
Revision as of 11:09, 30 July 2007 by Dan evans (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

You can upgrade from a previous version if you restore an earlier date to a backup file.

The idea is to save a file and then later restore it. That file contains icons for users, rooms, scenarios and floor plans, devices list and settings for each; which are restored using a database dump.

How it works Using web-admin site go to the Upper menu > Configuration > Backups

You have there some explanations on how the process works.

To save a backup you have to press 'Backup' and then save the file somewhere safe. Remember: download the backup and save it to another pc. Don't let it on your Linux MCE machine because you'll lose it.

Later after reinstalling the system or in case of failure, you can restore the system to that previous state.


Use 'Browse' button to locate the backup file and then press 'Restore'.

At this time there is a note what tells me that I have to reboot the system i order to install my configuration. 'Backup file uploaded, please reboot the machine and be patient, since it will take longer than a normal reboot.'

Reboot the machine and wait for the whole process to finish. After the interface loads you should see your icons and floor plans.


I used the restore successfully from a Pluto 2.0.0.44 to a LINUX MCE 1.1

What it didn't restore was the bookmarks created for media and the playlists


The restore from LINUX MCE 1.0 to LINUX MCE 1.1 was not complete. I have all the devices working but it didn't restore my icons for users, rooms and floor plans; and neither the bookmarks and play lists.