Difference between revisions of "Cisco 7970"

From LinuxMCE
Jump to: navigation, search
m (Spelling mistakes)
 
(66 intermediate revisions by 18 users not shown)
Line 1: Line 1:
 +
[[Category: Hardware]]
 +
{{versioninfo|810Status=Working|810UpdatedDate=31 July 2011|810UpdatedBy=daballiemo|versioninfo|1004Status=Working|1004UpdatedDate=17 September 2011|1004UpdatedBy=foxi352}}
 +
[[Category: Phones]]
 +
[[Category: IP Phones]]
 +
[[Category: Orbiters]]
 +
 
== Preface ==
 
== Preface ==
 
[[Image:Cisco7909.JPG]]
 
[[Image:Cisco7909.JPG]]
  
LinuxMCE allows to use many devices as Orbiters. One of them is CISCO 7970. You can use it to make calls and control your home as well. To add a new CISCO 7970 phone and Orbiter you should follow by this simple instruction. Basically I get the information in the LinuxMCE support forum. But I think it's good to accumulate odd posts in one place. If you have some suggestions send me email - stepanov.michael [at] gmail [dot] com or leave a comment.
+
LinuxMCE allows the use of many devices as [[Orbiters]]. One of them is the [http://www.cisco.com/en/US/products/hw/phones/ps379/ps5440/index.html CISCO 7970]. You can use it to control your home as well as to make calls.
 +
 
 +
To add a new CISCO 7970 phone as an Orbiter follow these simple instructions (from information in the [http://forum.linuxmce.org/ LinuxMCE support forum]).
  
 
== Preparation ==
 
== Preparation ==
  
CISCO 7970 phone is plug-in-play device and LinuxMCE adds it automatically when it'll be plugged in the network. But to do it we have to make some preparations. Run an Orbiter. Be sure that no others tasks are there!
+
CISCO 7970 phone is plug-in-play device; LinuxMCE adds it automatically when it is plugged into the network. But first, we have to make some preparations. Run an Orbiter. Be sure that no others tasks are running.
Check DHCP setting of your phone. It should be something like that: "get IP via DHCP an no alternative servers".
+
Check the DHCP setting of your phone. It should be something like that: "get IP via DHCP and no alternative servers".
 
Check the range of MAC addresses:
 
Check the range of MAC addresses:
1. Go to Advanced --> Configuration --> Device Template.
+
#Go to Advanced --> Configuration --> Device Template.
2. Chose manufacture CISCO. You should see in the right list at least two models: 7079 and 7076.
+
#Chose manufacturer CISCO.
3. Press the button 'Show model'.
+
#Click the 'Apply Filter' button.
4. On the opened window check 'Range MAC addresses'. The range contains two big decimal digits. To get correct range for your phone first see its MAC address. MAC address is six groups of two hexadecimal digits, separated by hyphens (<strong>-</strong>) or colon (<strong>:</strong>). The first three groups identify a maker. You leave them and fill the rest by 0 and F. For example, if MAC is <strong>00:16:78:CD:01:D8</strong> its range will be <strong>00:16:78:00:00:00</strong> - <strong>00:14:69:FF:FF:FF</strong>. After that you should convert those two values into LinuxMCE representation. To do that run a script <strong>/usr/pluto/bin/convert_mac</strong> and pass the hexadecimal values as parameters:
+
#In the Device Template drop down box select the Cisco 7970.
<code>/usr/pluto/bin/convert_mac 00:16:78:00:00:00
+
#Press the button 'Pick Device Template'.
/usr/pluto/bin/convert_mac 00:14:69:FF:FF:FF</code>
+
#On the opened window fill out a new 'Plug and Play' section with the converted MAC address of your phone. The range contains two big decimal digits. To get correct range for your phone first see its MAC address. You can find the MAC address on the back of the phone. It is a 12 digit hexadecimal number. The first three groups identify a maker. You leave them and fill the rest by 0 and F. For example, if MAC is <strong>00:16:78:CD:01:D8</strong> its range will be <strong>00:16:78:00:00:00</strong> - <strong>00:16:78:FF:FF:FF</strong>. After that you should convert those two values into LinuxMCE representation. To do that run a script <strong>/usr/pluto/bin/convert_mac</strong> and pass the hexadecimal values as parameters:
As result you will get two big decimal digits. Add them to the phone template and store.
+
/usr/pluto/bin/convert_mac 00:16:78:00:00:00
5. There is a possibility to have some problems with phone installation related with its firmware. It should be latest. But I didn't have any problem with existing firmware on my CISCO 7079. But you should bear in mind it.
+
/usr/pluto/bin/convert_mac 00:16:78:FF:FF:FF
Well, after this preparation you can install your CISCO 7079 in LinuxMCE.
+
:As result you will get two big decimal digits. Add them to the phone template and store.
   
+
If you have problems with phone installation, it may be related to firmware. The phone should have the latest firmware upgrade. (I didn't have any problem with existing firmware on my CISCO 7970, though).
 +
 
 +
Note for '''CISCO 7960 SIP''' users: if your phone fails to register with asterisk then edit /tftpboot/SIPDefault.cnf and append
 +
  nat_enable: 1
 +
 
 
== Installation ==
 
== Installation ==
  
1.  Plug the phone power and network cable.  Note if you have two network cards on your core you should plug network cable in the right switch.
+
#Plug the phone power and network cable.  Note if you have two network cards on your core you should plug network cable in the right switch.
2. During boot of the phone after 2-3 minutes you should see on the Orbiter a message about new device with your phone MAC address was detected. You should click by caption "Cisco 7970" below that.
+
#During boot of the phone after 2-3 minutes you should see on the Orbiter a message about new device with your phone MAC address was detected. You should click by caption "Cisco 7970" below that.
3. After that the phone should be registered with asterisk and you can see a normal CISCO screen.  
+
#After that the phone should be registered with asterisk and you can see a normal CISCO screen.  
4. However, it'll take another 2-3 minutes to generate a new Orbiter for CISCO7079.  
+
#However, it'll take another 2-3 minutes to generate a new Orbiter for CISCO7970.  
5. When this operation finishes you'll see a message on the Orbiter screen. Make a quick reload of router (Wizard -- Reboot -- Quick Reload Router. I also rebooted CISCO 7079 because I didn't see anything in the menu Services).
+
#When this operation finishes you'll see a message on the Orbiter screen. Make a quick reload of router (Wizard -- Reboot -- Quick Reload Router. I also rebooted CISCO 7970 because I didn't see anything in the menu Services).
6. Now go to menu Services on CISCO 7970 and chose Orbiter.
+
#Now go to menu Services on CISCO 7970 and chose Orbiter.
  
 
== Troubleshooting ==
 
== Troubleshooting ==
1. <u>Problem:</u> Phone boots successfully but there is no any message on the Orbiter's screen.
+
*<u>Problem:</u> Phone boots successfully but there is no any message on the Orbiter's screen.
<u>Solution:</u> If the message doesn't appear check MAC addresses range.
+
*<u>Solution:</u> If the message doesn't appear check MAC addresses range.
  
 
== Some useful tips ==
 
== Some useful tips ==
1. To reset a Network configuration of CISCO7079 go to menu 'Network Setting' and press the following sequence of buttons:  
+
*To reset a Network configuration of CISCO79xx go to menu 'Network Setting' and press the following sequence of buttons:  
<code>**#**</code>
+
**#**
2. To check network communications between CISCO7079 and CORE run tcpdump on the CORE:
+
*To check network communications between CISCO7970 and CORE run tcpdump on the CORE:
<code>tcpdump -i eth1 [CISCO7079 IP Address]</code>
+
tcpdump -i eth1 [CISCO7970 IP Address]
 
or to see detailed packets information:
 
or to see detailed packets information:
<code>tcpdump -i -vv eth1 [CISCO7079 IP Address]</code>
+
tcpdump -i -vv eth1 [CISCO7970 IP Address]
 +
or change TimeZone change following line in /tftpboot/SEPDefault7970.cnf.xml (you can find proper TimeZone strings [http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+7970+SIP here] ):
 +
<timeZone>W. Europe Standard/Daylight Time</timeZone>
 +
*To add the voicemail options to the message button, edit the sccp.conf file and add the following to the lines section of each phone:
 +
mailbox=<extension>
 +
vmnum=*97
 +
*To configure the display/backlight change the following lines in /tftpboot/SEPDefault7970.cnf.xml
 +
<daysDisplayNotActive>1,7</daysDisplayNotActive>
 +
<displayOnTime>09:00</displayOnTime>
 +
<displayOnDuration>08:00</displayOnDuration>
 +
<displayIdleTimeout>00:01</displayIdleTimeout>
 +
''daysDisplayNotActive'' you can put 1 through 7 where 1 = Sunday, 2 = Monday, 3 = Tuesday and so on.
  
[[Category: Phones]]
+
''displayOnTime'' is the time of the day the display is turned on
[[Category: Orbiters]]
+
 
 +
''displayOnDuration'' is the length of time from the ''displayOnTime'' that the display will remain on. So in the above example the display turns on at 9:00 and turns off at 17:00. I haven't tested but I believe having this as 00:00 would keep the display on 24/7.
 +
 
 +
''displayIdleTimeout'' is the length of time the display will remain on when outside the displayOnTime/Duration parameter (inside the display is always on).
 +
<displayOnWhenIncomingCall>1</displayOnWhenIncomingCall>
 +
This can be used for the display to turn on when receiving a call (0 = disable, 1 = enable). This line is currently not present in the file so just add it after the ''displayIdleTimeout''.
 +
Note: ''displayOnWhenIncomingCall'' doesn't work on all firmwares.
 +
 
 +
To turn on the display just press the "Display button" that should be solid green. (solid green = display turn off, blinking green = only the touchscreen is off) 
 +
 
 +
 
 +
Email suggestions to: stepanov.michael [at] gmail [dot] com or leave a comment.
 +
 
 +
==Directory button on Cisco IP Phone==
 +
<b>Please Note, this is  a part of the LinuxMCE system. Just press the directory button and enjoy.</b>
 +
 
 +
It has the following Features:
 +
 
 +
* Works with Contacts from the Pluto phone directory
 +
* Paginates them based on # of entries in phone book
 +
* Shows the phone type.
 +
 
 +
If there are any problems, let me know --[[User:Tschak909|Tschak909]] ( thom.cherryhomes (at) gmail (dot) com ).
 +
 
 +
==Add usefull XML services beside Orbiter==
 +
 
 +
Currently this feature doesn't make much sense if you use Orbiter on phone, cause it's constantly refreshing and you loose focus of any other menu on the phone.... I've searched internet a bit and found few usefull applications that will let you put rss or xml feeds to your 7970.
 +
 
 +
Basically you can try rss or xml feeds directly, but also there is usefull script that automatically converts pages to proper format - for example:
 +
http://phone-xml.berbee.com/menu.xml?opts=67
 +
 
 +
Gives you rss feeds from CNN and BBC. You can also use this script to convert any rss feed to same shape (it's weather rss feed in my country):
 +
 
 +
http://phone-xml.berbee.com/rss/items.php?url=http://vreme.zurnal24.si/xml/rss/vreme.xml
 +
 
 +
I have further modified file /var/www/pluto-admin/ServicesMenu.php - and added more entries - basically it's XML list of various URLs to follow.
 +
 
 +
==Hidden features==
 +
 
 +
http://yourIpPhoneIPAddress/CGI/Screenshot (See Also /CGI/CallInfo /CGI/LineInfo and /CGI/SettingsInfo)
 +
 
 +
[[File:7970_Screenshot.png]]
 +
 
 +
== Firmware updates ==
 +
 
 +
Since LinuxMCE 12.04 it is possible to update the firmware of CISCO 7970 phones. To do this you must be registered on cisco.com website and have the needed licenses to be legal. To update the firmware please follow the below steps:
 +
* Download newest SCCP firmware from cisco.com (you must be registered). Download the "firmware files only" package which is a .zip file.
 +
* Unpack the files to the /tftpboot directory of your core.
 +
* The package should contain some tem*.loads files, some *.sbn files and a SCCP*.loads file. Copy the filename of the SCCP*.loads file.
 +
* In webadmin enter the "Phones" menu under "Devices".
 +
* Search for your 7970 phones and paste the SCCP*.loads filename in the "Firmware"  field.
 +
* Click "Update" at page bottom
 +
* Power cycle your 7970 phones.
 +
* The phones should auto update after first boot. This will take a while. You can monitor progress on the phone's screen.
 +
 
 +
==Usefull links==
 +
 
 +
[http://web.csma.biz/apps/xml_xmldir.php Open 79XX XML Directory] - Gives you possibility to edit info showed/used on Phone... I've just tried ver 1.2 and it seems really useful. Beside contacts and search capability, it allows user to organize external xml services, memos, notes together in one easy to traverse menu... Really worth of consideration...
 +
 
 +
[http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html#wp1137794 vendorConfig Parameter-Name and Parameter-Value Descriptions] Overview of the parameters that can be given in the *.cnf.xml file.

Latest revision as of 21:04, 2 April 2013

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Working 31 July 2011 daballiemo
1004 Working 17 September 2011 foxi352
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

Preface

Cisco7909.JPG

LinuxMCE allows the use of many devices as Orbiters. One of them is the CISCO 7970. You can use it to control your home as well as to make calls.

To add a new CISCO 7970 phone as an Orbiter follow these simple instructions (from information in the LinuxMCE support forum).

Preparation

CISCO 7970 phone is plug-in-play device; LinuxMCE adds it automatically when it is plugged into the network. But first, we have to make some preparations. Run an Orbiter. Be sure that no others tasks are running. Check the DHCP setting of your phone. It should be something like that: "get IP via DHCP and no alternative servers". Check the range of MAC addresses:

  1. Go to Advanced --> Configuration --> Device Template.
  2. Chose manufacturer CISCO.
  3. Click the 'Apply Filter' button.
  4. In the Device Template drop down box select the Cisco 7970.
  5. Press the button 'Pick Device Template'.
  6. On the opened window fill out a new 'Plug and Play' section with the converted MAC address of your phone. The range contains two big decimal digits. To get correct range for your phone first see its MAC address. You can find the MAC address on the back of the phone. It is a 12 digit hexadecimal number. The first three groups identify a maker. You leave them and fill the rest by 0 and F. For example, if MAC is 00:16:78:CD:01:D8 its range will be 00:16:78:00:00:00 - 00:16:78:FF:FF:FF. After that you should convert those two values into LinuxMCE representation. To do that run a script /usr/pluto/bin/convert_mac and pass the hexadecimal values as parameters:
/usr/pluto/bin/convert_mac 00:16:78:00:00:00
/usr/pluto/bin/convert_mac 00:16:78:FF:FF:FF
As result you will get two big decimal digits. Add them to the phone template and store.

If you have problems with phone installation, it may be related to firmware. The phone should have the latest firmware upgrade. (I didn't have any problem with existing firmware on my CISCO 7970, though).

Note for CISCO 7960 SIP users: if your phone fails to register with asterisk then edit /tftpboot/SIPDefault.cnf and append

nat_enable: 1

Installation

  1. Plug the phone power and network cable. Note if you have two network cards on your core you should plug network cable in the right switch.
  2. During boot of the phone after 2-3 minutes you should see on the Orbiter a message about new device with your phone MAC address was detected. You should click by caption "Cisco 7970" below that.
  3. After that the phone should be registered with asterisk and you can see a normal CISCO screen.
  4. However, it'll take another 2-3 minutes to generate a new Orbiter for CISCO7970.
  5. When this operation finishes you'll see a message on the Orbiter screen. Make a quick reload of router (Wizard -- Reboot -- Quick Reload Router. I also rebooted CISCO 7970 because I didn't see anything in the menu Services).
  6. Now go to menu Services on CISCO 7970 and chose Orbiter.

Troubleshooting

  • Problem: Phone boots successfully but there is no any message on the Orbiter's screen.
  • Solution: If the message doesn't appear check MAC addresses range.

Some useful tips

  • To reset a Network configuration of CISCO79xx go to menu 'Network Setting' and press the following sequence of buttons:
**#**
  • To check network communications between CISCO7970 and CORE run tcpdump on the CORE:
tcpdump -i eth1 [CISCO7970 IP Address]

or to see detailed packets information:

tcpdump -i -vv eth1 [CISCO7970 IP Address]

or change TimeZone change following line in /tftpboot/SEPDefault7970.cnf.xml (you can find proper TimeZone strings here ):

<timeZone>W. Europe Standard/Daylight Time</timeZone>
  • To add the voicemail options to the message button, edit the sccp.conf file and add the following to the lines section of each phone:
mailbox=<extension>
vmnum=*97
  • To configure the display/backlight change the following lines in /tftpboot/SEPDefault7970.cnf.xml
<daysDisplayNotActive>1,7</daysDisplayNotActive>
<displayOnTime>09:00</displayOnTime>
<displayOnDuration>08:00</displayOnDuration>
<displayIdleTimeout>00:01</displayIdleTimeout>

daysDisplayNotActive you can put 1 through 7 where 1 = Sunday, 2 = Monday, 3 = Tuesday and so on.

displayOnTime is the time of the day the display is turned on

displayOnDuration is the length of time from the displayOnTime that the display will remain on. So in the above example the display turns on at 9:00 and turns off at 17:00. I haven't tested but I believe having this as 00:00 would keep the display on 24/7.

displayIdleTimeout is the length of time the display will remain on when outside the displayOnTime/Duration parameter (inside the display is always on).

<displayOnWhenIncomingCall>1</displayOnWhenIncomingCall>

This can be used for the display to turn on when receiving a call (0 = disable, 1 = enable). This line is currently not present in the file so just add it after the displayIdleTimeout. Note: displayOnWhenIncomingCall doesn't work on all firmwares.

To turn on the display just press the "Display button" that should be solid green. (solid green = display turn off, blinking green = only the touchscreen is off)


Email suggestions to: stepanov.michael [at] gmail [dot] com or leave a comment.

Directory button on Cisco IP Phone

Please Note, this is a part of the LinuxMCE system. Just press the directory button and enjoy.

It has the following Features:

  • Works with Contacts from the Pluto phone directory
  • Paginates them based on # of entries in phone book
  • Shows the phone type.

If there are any problems, let me know --Tschak909 ( thom.cherryhomes (at) gmail (dot) com ).

Add usefull XML services beside Orbiter

Currently this feature doesn't make much sense if you use Orbiter on phone, cause it's constantly refreshing and you loose focus of any other menu on the phone.... I've searched internet a bit and found few usefull applications that will let you put rss or xml feeds to your 7970.

Basically you can try rss or xml feeds directly, but also there is usefull script that automatically converts pages to proper format - for example:

http://phone-xml.berbee.com/menu.xml?opts=67

Gives you rss feeds from CNN and BBC. You can also use this script to convert any rss feed to same shape (it's weather rss feed in my country):

http://phone-xml.berbee.com/rss/items.php?url=http://vreme.zurnal24.si/xml/rss/vreme.xml

I have further modified file /var/www/pluto-admin/ServicesMenu.php - and added more entries - basically it's XML list of various URLs to follow.

Hidden features

http://yourIpPhoneIPAddress/CGI/Screenshot (See Also /CGI/CallInfo /CGI/LineInfo and /CGI/SettingsInfo)

7970 Screenshot.png

Firmware updates

Since LinuxMCE 12.04 it is possible to update the firmware of CISCO 7970 phones. To do this you must be registered on cisco.com website and have the needed licenses to be legal. To update the firmware please follow the below steps:

  • Download newest SCCP firmware from cisco.com (you must be registered). Download the "firmware files only" package which is a .zip file.
  • Unpack the files to the /tftpboot directory of your core.
  • The package should contain some tem*.loads files, some *.sbn files and a SCCP*.loads file. Copy the filename of the SCCP*.loads file.
  • In webadmin enter the "Phones" menu under "Devices".
  • Search for your 7970 phones and paste the SCCP*.loads filename in the "Firmware" field.
  • Click "Update" at page bottom
  • Power cycle your 7970 phones.
  • The phones should auto update after first boot. This will take a while. You can monitor progress on the phone's screen.

Usefull links

Open 79XX XML Directory - Gives you possibility to edit info showed/used on Phone... I've just tried ver 1.2 and it seems really useful. Beside contacts and search capability, it allows user to organize external xml services, memos, notes together in one easy to traverse menu... Really worth of consideration...

vendorConfig Parameter-Name and Parameter-Value Descriptions Overview of the parameters that can be given in the *.cnf.xml file.