E-Fon (Switzerland)

From LinuxMCE
Revision as of 16:47, 5 June 2006 by Wikiadmin (Talk | contribs) (Imported document)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
This page was written by Pluto and imported with their permission when LinuxMCE branched off in February, 2007. In general any information should apply to LinuxMCE. However, this page should be edited to reflect changes to LinuxMCE and remove old references to Pluto.

Setup for E-FON

Go to 'Trunks' section

Add a IAX2 trunk

On 'Outgoing Dial Rules' add

9|.
this will be the prefix to place call to E-FON network

On 'Outgoing Settings' set trunk name to

efon
and peer details to
callow=alaw
auth=md5
callerid="YOUR_NAME" YOUR_EFON_NUMBER
canreinvite=no
disallow=all
host=YOUR_EFON_PROXY
nat=yes
qualify=no
secret=YOUR_EFON_PASSWORD
type=peer
username=YOUR_EFON_NUMBER

On 'Incoming Settings' set usercontext to

YOUR_EFON_NUMBER
and user details to
auth=md5
context=from-pstn
secret=YOUR_EFON_PASSWORD
type=user
username=YOUR_EFON_NUMBER

On 'Registration' set registration string to

YOUR_EFON_NUMBER:YOUR_EFON_PASSWORD@YOUR_EFON_PROXY

Go to Outbound Routing section

Set route name to

efon

Set dial patterns to

9|.

Set trunk sequence to

IAX2/efon

Go to DID Routes section

Set number to

YOUR EFON NUMBER

Select the extension to ring, or select default incoming extension

Apply your changes by clicking on red line.