Difference between revisions of "Hauppauge WinTV-HVR-2250"

Revision as of 02:21, 11 March 2010

Product Info

From Manufacturer's Web Site

• Dual digital TV receivers for ATSC or clear QAM
• Dual built-in hardware MPEG-2 encoders
• Built-in antenna splitter
• PCI Express (PCIe) x1 interface
• S-Video, composite video and stereo audio inputs

Versions

From Manufacturer's Web Site

• Model 01213: WinTV-HVR-2250 Media Center Kit: includes a Media Center certified remote control transmitter, an IR remote control receiver/blaster cable, an A/V breakout cable for the primary A/V input, an auxiliary A/V panel and cable to add a second set of audio/video inputs, and an IR transmitter cable to control a second set top box thorugh the auxiliary A/V panel
• Model 01229: WinTV-HVR-2250 Board Only: Includes optional half height bracket and an auxiliary A/V panel and cable to add a second set of audio/video inputs. Remote control not included.

LinuxMCE Support

This card is listed as Plug and Play in the Capture Cards WIKI.

Working in 0710: Unknown

Working in 0810: Unknown

Installation Instructions

Place instructions to get card working here

Place instructions to get MCE remote working here

Place instructions to get IR blasters working here

(Work In Progress)

lspci Output

04:00.0 0480: 1131:7164 (rev 81) Subsystem: 0070:8851 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e3400000 (64-bit, non-prefetchable) [size=4M] Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [50] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [74] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [7c] Vendor Specific Information <?> Capabilities: [100] Vendor Specific Information <?> Capabilities: [160] Virtual Channel <?>

--Dison4linux 21:22, 9 March 2010 (CET)