How to set main office phoneline

From LinuxMCE
Revision as of 10:29, 24 May 2006 by Wikiadmin (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
This page was written by Pluto and imported with their permission when LinuxMCE branched off in February, 2007. In general any information should apply to LinuxMCE. However, this page should be edited to reflect changes to LinuxMCE and remove old references to Pluto.

If you need to test something with Cisco7960 or (by accident) modified asterisk configuration on 10.0.0.150, and you still want broadvoice number to ring in the office read this manual.

Cisco 7960 changed

If you used the phone for tests (and set it to get ip by DHCP) you have to revert those changes :

  • set DHCP to NO
  • set IP to 10.0.0.203
  • set MASK to .255.255.255.0
  • set Router to 10.0.0.1
  • set NameServer to 10.0.0.1
  • set TFTP to 10.0.0.150 (on 10.0.0.150 in /tftpboot you'll find it's configuration files, no need to modify)
  • reboot the phone
  • if something went wrong (it hasn't registered in 1-2 minutes) recheck all phone settings.

You have to do so because in 10.0.0.* network we don't have DCHP that will set TFTP, and so on.

When you plug the phone in one of the testing network and set it to DHCP it will fill those automatically.

Configs on .150 changed