Difference between revisions of "Linksys SPA3000"

From LinuxMCE
Jump to: navigation, search
(New page: The Sipura (now bought out by Linksys) spa 3000 is a pstn (analog phone line) to Asterisk gateway device that provides a SIP interface for 1 FXO port (analog phone line) and 1 FXS port (an...)
 
Line 2: Line 2:
  
 
Most office environments have a phone in each room with their own extension number. Most homes, however, are set up with 1 common line (extension) that all phones are connected to - when a call comes in, all phones ring together. LMCE will allow you to have either setup (if you have enough FXS ports to support the number of extensions you want). Since the spa 3000 has only 1 FXS port, I am going to show you how to set it up so that all phones on the main house phone line will be treated as one extension and ring together. The picture below illustrates the installation method that I'm going to outline here.
 
Most office environments have a phone in each room with their own extension number. Most homes, however, are set up with 1 common line (extension) that all phones are connected to - when a call comes in, all phones ring together. LMCE will allow you to have either setup (if you have enough FXS ports to support the number of extensions you want). Since the spa 3000 has only 1 FXS port, I am going to show you how to set it up so that all phones on the main house phone line will be treated as one extension and ring together. The picture below illustrates the installation method that I'm going to outline here.
 +
[[Image:spa3000_setup.png]]

Revision as of 16:09, 16 January 2009

The Sipura (now bought out by Linksys) spa 3000 is a pstn (analog phone line) to Asterisk gateway device that provides a SIP interface for 1 FXO port (analog phone line) and 1 FXS port (analog phone). This allows you to use the Telecom section of LMCE, and use Asterisk to send/recieve/route phone calls.

Most office environments have a phone in each room with their own extension number. Most homes, however, are set up with 1 common line (extension) that all phones are connected to - when a call comes in, all phones ring together. LMCE will allow you to have either setup (if you have enough FXS ports to support the number of extensions you want). Since the spa 3000 has only 1 FXS port, I am going to show you how to set it up so that all phones on the main house phone line will be treated as one extension and ring together. The picture below illustrates the installation method that I'm going to outline here. Spa3000 setup.png