Difference between revisions of "Linksys rtp300"
From LinuxMCE
(New page: Category: Hardware {{versioninfo|710Status=Unknown|710UpdatedDate=N/A|710UpdatedBy=N/A|810Status=Working with issues|810UpdatedDate=4th February 2011|810UpdatedBy=Willow3}} [[Category:...) |
|||
| Line 6: | Line 6: | ||
| __TOC__ | | __TOC__ | ||
|} | |} | ||
| − | = Summary = | + | =Summary= |
[[Image:Rtp300_front.jpg]] | [[Image:Rtp300_front.jpg]] | ||
[[Image:Rtp300_back.jpg]] | [[Image:Rtp300_back.jpg]] | ||
| + | |||
| + | The Linksys RTP300 is a 4-port Ethernet router with two built in phone-lines. Each phone line has a corresponding RJ-11 jack on the back of the device where you can connect any regular analogue phone. | ||
| + | |||
| + | The RTP300 is often provided to customers by SIP providers as a cheap HW solution to get started quickly with whatever phone you already have at home. If you are registered with a SIP provider chances are that you already have one at home. | ||
| + | |||
| + | This device supports all common protocols, but this page describes how to use it as a SIP device. It is not PnP in LinuxMCE, but with some simple manual steps it can easily be integrated in your LinuxMCE system. This page describes how. | ||
Revision as of 22:52, 4 February 2011
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Working with issues | 4th February 2011 | Willow3 |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Contents |
Summary
The Linksys RTP300 is a 4-port Ethernet router with two built in phone-lines. Each phone line has a corresponding RJ-11 jack on the back of the device where you can connect any regular analogue phone.
The RTP300 is often provided to customers by SIP providers as a cheap HW solution to get started quickly with whatever phone you already have at home. If you are registered with a SIP provider chances are that you already have one at home.
This device supports all common protocols, but this page describes how to use it as a SIP device. It is not PnP in LinuxMCE, but with some simple manual steps it can easily be integrated in your LinuxMCE system. This page describes how.
