Difference between revisions of "Linksys spa-3102"

From LinuxMCE
Jump to: navigation, search
(New page: =Linksys SPA-3102= ====Specifications==== The Linksys SPA3102 features the ability to connect standard telephones and fax machines to IP-based data networks with the additional benefit of...)
 
Line 10: Line 10:
 
**IP Telephony Features Echo cancellation (G.168)
 
**IP Telephony Features Echo cancellation (G.168)
  
=Setting up with linuxMCE=
+
==Setting up with linuxMCE==
  
 
===Configuring the Device===
 
===Configuring the Device===
Line 16: Line 16:
 
**Connect the SPA-3102 to your internal network (the one connected to the lmce subnet)
 
**Connect the SPA-3102 to your internal network (the one connected to the lmce subnet)
 
**Proceed with initial configuration via the administration page. Once you set passwords and locale settings, you can move to the next step
 
**Proceed with initial configuration via the administration page. Once you set passwords and locale settings, you can move to the next step
**Note, you can leave the dhcp and network settings as is. We will not be using the routing functions of this device.
+
**Note, you can leave the dhcp and network settings as is. We will not be using the routing functions of this device. You will need to make a note on the address assigned to the device.
  
 
*Step 2 - SIP connection settings.  
 
*Step 2 - SIP connection settings.  
**
+
**Click the ''PSTN Line'' settings.
 +
**Choose 'Admin' and 'Advanced' option in the top left right corner to see all available options.
 +
***Do not change anything other than what you need. There are a lot of options!
 +
*** ''Line Option'' Set to enable.
 +
*** '''Sip Settings'''
 +
**** Make sure the port is set to '''5061'''
 +
*** '''Proxy and registration'''
 +
**** Proxy: the '''ip''' address of your core.
 +
**** Register: Yes
 +
**** Make calls without registration: - Not tested but set to yes
 +
**** Answer calls without registration: Not tested but set to yes
 +
*** '''Subscriber Information'''
 +
****

Revision as of 03:38, 10 June 2008

Linksys SPA-3102

Specifications

The Linksys SPA3102 features the ability to connect standard telephones and fax machines to IP-based data networks with the additional benefit of an integrated connection for legacy telephone network "hop-on, hop-off" applications.

  • IP Telephony features
    • VoIP Protocols SIP v2
    • Voice Codecs G.711, G.723.1, G.729a, G.726
    • Telephony Interfaces 1 phone (FXS), 1 line (FXO)
    • IP Telephony Features Echo cancellation (G.168)

Setting up with linuxMCE

Configuring the Device

  • Step 1 - Initial setup.
    • Connect the SPA-3102 to your internal network (the one connected to the lmce subnet)
    • Proceed with initial configuration via the administration page. Once you set passwords and locale settings, you can move to the next step
    • Note, you can leave the dhcp and network settings as is. We will not be using the routing functions of this device. You will need to make a note on the address assigned to the device.
  • Step 2 - SIP connection settings.
    • Click the PSTN Line settings.
    • Choose 'Admin' and 'Advanced' option in the top left right corner to see all available options.
      • Do not change anything other than what you need. There are a lot of options!
      • Line Option Set to enable.
      • Sip Settings
        • Make sure the port is set to 5061
      • Proxy and registration
        • Proxy: the ip address of your core.
        • Register: Yes
        • Make calls without registration: - Not tested but set to yes
        • Answer calls without registration: Not tested but set to yes
      • Subscriber Information