Difference between revisions of "LinuxMCE Admin Website"

From LinuxMCE
Jump to: navigation, search
(Files & Media)
 
(28 intermediate revisions by 8 users not shown)
Line 1: Line 1:
 +
[[Category: Documentation]]
 +
 +
[[Category: Programmer's Guide]]
 
{| align="right"
 
{| align="right"
 
   | __TOC__
 
   | __TOC__
 
   |}
 
   |}
 +
''<center><small>If you were directed here from your Admin page, see the [[:Help:Contents|Help section]].</small></center>''
 
The LinuxMCE Admin web site is used to setup and configure your LinuxMCE system.  It also allows you to do a lot of other tasks, such as to check your voice-mail, organize your media, etc.  The web site runs on the LinuxMCE Core. You can access it from the Core web browser, or from any other computer connected to the network.   
 
The LinuxMCE Admin web site is used to setup and configure your LinuxMCE system.  It also allows you to do a lot of other tasks, such as to check your voice-mail, organize your media, etc.  The web site runs on the LinuxMCE Core. You can access it from the Core web browser, or from any other computer connected to the network.   
  
 
==Access to the LinuxMCE Admin Website==
 
==Access to the LinuxMCE Admin Website==
===From the Core ===
+
===From a Core or Media Director desktop===
A button is available on the [[Launch Manager]] that is displayed on the Core desktop:
+
* Choose '''Advanced''' -> '''Computing''' -> '''Web Admin''' from the menu
:::* ''Open admin website''
+
  
 
===From within your home===
 
===From within your home===
Line 13: Line 16:
  
 
*In the browser address bar, type the URL ''<nowiki>http://&lt;core_ip&gt;/pluto-admin</nowiki>''.
 
*In the browser address bar, type the URL ''<nowiki>http://&lt;core_ip&gt;/pluto-admin</nowiki>''.
:* From within the "internal" LinuxMCE LAN, for example:  
+
* From within the "internal" LinuxMCE LAN, for example:  
::::''<nowiki>http://192.168.80.1/pluto-admin</nowiki>''
+
**''<nowiki>http://192.168.80.1/pluto-admin</nowiki>''
:::::(This assumes the IP address range set by default at installation.)
+
***(This assumes the IP address range set by default at installation.)
:*From the "external" home LAN, the core_ip would be the LAN IP address of the core. If, for example, the core is at 192.168.0.50 on the home LAN, use:
+
 
:::: ''<nowiki>http://192.168.0.50/pluto-admin</nowiki>''
+
*You can also use the network name of the Core in place of the IP address. For example, if the Core was named "dcerouter" during the default installation, you could use:
:*You can also use the network name of the Core in place of the IP address. For example, if the Core was named "dcerouter" during the default installation, you could use:
+
**''<nowiki>http://dcerouter/pluto-admin</nowiki>''
::::''<nowiki>http://dcerouter/pluto-admin</nowiki>''
+
 
 +
*From the "external" home LAN, the core_ip would be the LAN IP address of the core. If, for example, the core is at 192.168.0.50 on the home LAN, use:
 +
**''<nowiki>http://192.168.0.50/pluto-admin</nowiki>''
  
 
===From the Internet===
 
===From the Internet===
 
You could use the IP address:port for your home LAN, with port forwarding to the Core's LAN IP address (enabled by your home LAN router).  
 
You could use the IP address:port for your home LAN, with port forwarding to the Core's LAN IP address (enabled by your home LAN router).  
*''This is an advanced topic and may not be fully implemented or secure in the current version.''.
+
*''This is an advanced topic and may not be secure in the current version.''.
  
 
By default, the LinuxMCE Admin web site is not accessible outside your home. This makes the system secure, but it prevents you from accessing the web site via the Internet while away from home.  You can [[Outside_Access|turn on Internet access]], allowing access to the admin website anywhere. For your own security, however, we recommend you first read about [[Security & Privacy Issues]].
 
By default, the LinuxMCE Admin web site is not accessible outside your home. This makes the system secure, but it prevents you from accessing the web site via the Internet while away from home.  You can [[Outside_Access|turn on Internet access]], allowing access to the admin website anywhere. For your own security, however, we recommend you first read about [[Security & Privacy Issues]].
Line 29: Line 34:
 
===Login page===
 
===Login page===
 
*The login page should be displayed. Input an existing user name and password, then click "Login".
 
*The login page should be displayed. Input an existing user name and password, then click "Login".
<br>
 
  
 
=LinuxMCE Admin Website Sections=
 
=LinuxMCE Admin Website Sections=
Line 48: Line 52:
 
*[[Users]]
 
*[[Users]]
 
*[[Rooms]]
 
*[[Rooms]]
 +
*[[Email]]
 
*[[Keyboard Layout]]
 
*[[Keyboard Layout]]
 +
 
===[[Devices]]===
 
===[[Devices]]===
 
*Core
 
*Core
Line 106: Line 112:
 
* [[Advanced Pages Scenarios | Scenarios]]
 
* [[Advanced Pages Scenarios | Scenarios]]
 
* [[Advanced Pages Events | Events]]
 
* [[Advanced Pages Events | Events]]
* Phones Setup
+
* [[Phones Setup]]
* Backups
+
* [[Backup and Restore | Backups]]
* RAID
+
* [[Create_RAID_in_LMCE#Creating_RAID| RAID]]
  
 
===[[Privacy Settings]]===
 
===[[Privacy Settings]]===
Line 134: Line 140:
 
*[[Status]]
 
*[[Status]]
 
*[[View Cameras]]
 
*[[View Cameras]]
==Files&Media==
+
==Files & Media==
 
* Media Browser
 
* Media Browser
* Media Files Sync
+
* [[Media Files Sync]]
 
* Playlist
 
* Playlist
 
* Media Providers
 
* Media Providers
Line 142: Line 148:
 
* [[Cover Art]]
 
* [[Cover Art]]
 
* Ripping Status
 
* Ripping Status
 +
* [[Screen Saver]]
  
 
==Telecom==
 
==Telecom==
Line 153: Line 160:
 
The following is leftover from another page:
 
The following is leftover from another page:
  
====EXAMPLE: Adding other devices====
+
=Development=
 
+
Doing development against the linuxMCE web administration requires acessing the files either locally with your editor of choice, or even remotely. Its also a good idea to install phpmyadmin, which will let you view the tables and such associated with the linuxMCE installation your working with. The web admin is located on your core in '''/var/www/lmce-admin''' and in the svn under 'web'.
Example:
+
You have 2 [[gc100]]'s which give you Infrared control of your A/V equipment, extra serial ports to plug other stuff into, ttl inputs and relays. You have some TVs and stereos to control, and also a [[CM11A]] module to control [[X10]] devices (plus some [[X10]] lights and [[thermostats]]).
+
The [[CM11A]] is plugged into one of the rs232 serial ports on the [[gc100]]. You also have an alarm panel with a serial interface, some Squeezebox audio players, and some network cameras.
+
 
+
Specify [[Basic Info]] on the first couple wizard pages, like family members and rooms.
+
 
+
Then go to [[Interfaces]]. Add the interface devices that control other devices. The [[gc100]] is an interface device. The TVs and stereos it controls are on the A/V page. The [[CM11A]], [[Vantage]], and [[Lutron]] are also interfaces. The lights, blinds, and drapes they control are on the [[Lights]]|lighting page.  The alarm panel is an interface. The motion, glass break, and smoke alarms it monitors are on the [[Security]] page.
+
  
If you want to add [[EIB]] lights (on the lighting page), you won't be allowed to do that until you add the [[EIB]] interface on the interfaces page. If you add interfaces for both an [[EIB]] Lighting system and an [[X10]] lighting system, then on the lighting page you will be able to add both types of lights. The 'Controlled Via' field will display which interface is being used for light.
+
It currently employs a large index file with case switching for the majority of pages, with those pages then leading to others relating to their specific function. The database also employs ADODB for most of the operations involving database transactions. Pages involve the use of template's with javascript objects writing data to the page. Please note, this is '''quite the basic''' overview.
  
Add the [[CM11A]]. Like all [[RS232]] devices, it is not plug and play. You must add it manually. Repeat for the alarm panel. In both cases, the Controlled Via devices is the Core, since that's where the software drivers will be run. When you go to choose the port, it only shows the Core's internal serial ports. You want to plug it into one of the ports on the gc100, though. So, click '[[Wizard]]'-->'Restart'-->'quick reload router'. That causes the [[DCE Router]] to reload the list of devices in the house so it sees the new gc100's you added and adds the ports. Refresh the Interfaces page, and now you can choose the gc100 ports for the CM11A and alarm panel.
+
==Network Share Method==
  
Next, add your TVs and stereos on the [[AV Devices]] and indicate how they are connected (which AV inputs). If your model is not in the database you will need to add it. If the I/R codes for your device aren't listed or don't work, you will click the A/V properties button and either [[Learning/typing my own code|learn them]] using the gc100's learner (plug it into serial port 1 and click 'learn') or [[Learning/typing my own code|copy+paste the I/R codes in pronto format]] from a source like www.remotecentral.com. Your devices and I/R codes will automatically be sent to LinuxMCE and added to the master database for other users (unless you uncheck the box). In the 'controlled via' choose whichever one of the gc100's has the infrared emitter attached for that device.
+
The most simple method of making '''/lmce-admin''' available for editing outside of the core on your local network involves modifying samba. Please note: samba fixes itself on reboot and you will need to modify the config again to regain access to the files.
  
Turn your Squeeze Boxes on, set the network to [[DHCP]], and plug them in. LinuxMCE will automatically recognize them and configure them. You will see a confirmation message and be asked to pick the room they're in. Refresh the A/V page to see the Squeeze Boxes and indicate how you connect them to your stereo system.
+
Edit '''/etc/samba/samba.conf''' and add this before the last line:
  
On the [[Media Directors]] and [[Orbiters]] page, be sure your settings are correct. Then on the [[Lights]] and [[Climate]] pages, add your [[X10]] lights/thermostats. The 'Controlled Via' is the [[CM11A]] device. On the security page, add your motion detectors, and smoke alarms. The 'Controlled Via' is the alarm panel.
+
[www]
 +
  comment = Web server files
 +
browseable = yes
 +
writable = yes
 +
create mask = 0770
 +
directory mask = 0770
 +
path = /var/www
 +
public = no
 +
guest ok = no
 +
force user = www-data
 +
  force group = www-data
  
On the [[Floorplans]], drag and drop your devices on the maps you upload. You'll need to do a 'regen orbiter' followed by a 'quick reload router' before you can use the floorplans.
+
Then restart samba by typing into the console
 +
/etc/init.d/samba restart
  
Now let's test the devices. Do another 'quick reload router' so [[DCERouter]] sees these new devices. Go back to a device, like a light, click 'ADV' to go to the Advanced page, or choose [[Devices]] from the menu. Click 'Send command to device', and choose a command. If it doesn't respond, go to 'Advanced'-->'Logs' and check the logs for the interface (the [[CM11A]] in this case).
+
And now the lmce-admin directory will appear as a share on the local network.  
  
===Adding custom entries in LinuxMCE-Admin menus===
+
==Adding custom entries in LinuxMCE Admin menus==
  
 
Currently only option is to enter entries into Pluto_main database, table PageSetup. There you'll find other entries already, go to the end and add yours (but be careful not to break anything and also save your changes, cause they can probably lost in migration or updates - not sure)...
 
Currently only option is to enter entries into Pluto_main database, table PageSetup. There you'll find other entries already, go to the end and add yours (but be careful not to break anything and also save your changes, cause they can probably lost in migration or updates - not sure)...

Latest revision as of 20:47, 3 December 2013

If you were directed here from your Admin page, see the Help section.

The LinuxMCE Admin web site is used to setup and configure your LinuxMCE system. It also allows you to do a lot of other tasks, such as to check your voice-mail, organize your media, etc. The web site runs on the LinuxMCE Core. You can access it from the Core web browser, or from any other computer connected to the network.

Access to the LinuxMCE Admin Website

From a Core or Media Director desktop

  • Choose Advanced -> Computing -> Web Admin from the menu

From within your home

You can access the LinuxMCE Admin website from any web browser (Mozilla Firefox, IE, Safari):

  • In the browser address bar, type the URL http://<core_ip>/pluto-admin.
  • From within the "internal" LinuxMCE LAN, for example:
    • http://192.168.80.1/pluto-admin
      • (This assumes the IP address range set by default at installation.)
  • You can also use the network name of the Core in place of the IP address. For example, if the Core was named "dcerouter" during the default installation, you could use:
    • http://dcerouter/pluto-admin
  • From the "external" home LAN, the core_ip would be the LAN IP address of the core. If, for example, the core is at 192.168.0.50 on the home LAN, use:
    • http://192.168.0.50/pluto-admin

From the Internet

You could use the IP address:port for your home LAN, with port forwarding to the Core's LAN IP address (enabled by your home LAN router).

  • This is an advanced topic and may not be secure in the current version..

By default, the LinuxMCE Admin web site is not accessible outside your home. This makes the system secure, but it prevents you from accessing the web site via the Internet while away from home. You can turn on Internet access, allowing access to the admin website anywhere. For your own security, however, we recommend you first read about Security & Privacy Issues.

Login page

  • The login page should be displayed. Input an existing user name and password, then click "Login".

LinuxMCE Admin Website Sections

Admin page structure

LinuxMCE is a modular platform with a wide variety of optional modules and devices. Generally, each module will have one or more web pages to configure when using that module. The LinuxMCE Admin web site has a pull-down menu that lets you quickly access any of those pages. The menu options for each particular home will be unique, depending on the configuration.

Two menu options will always be displayed.

  • The Wizard is the commonly used way to configure and setup your LinuxMCE system. When you choose Wizard, you will see a series of steps that depends on what devices you have installed in your home. The pages in the Wizard section are intended to be simple for the average user. Context-sensitive help is provided through a "Help" button.
  • There are more low level options under the Advanced option.

Wizard

Basic Info

Devices

Scenarios

Events Handler

Security

Restart

Advanced

Software

Network

Configuration

Privacy Settings

sqlCVS

  • Update
  • Checkin
  • Diff
  • View Batch

DCE

  • Device Data
  • Commands
  • Events

Automation

Security

Files & Media

Telecom

  • My Voicemail
  • General Voicemail
  • Phone book
  • Call Routing
  • Priority Callers
  • Callers for me

The following is leftover from another page:

Development

Doing development against the linuxMCE web administration requires acessing the files either locally with your editor of choice, or even remotely. Its also a good idea to install phpmyadmin, which will let you view the tables and such associated with the linuxMCE installation your working with. The web admin is located on your core in /var/www/lmce-admin and in the svn under 'web'.

It currently employs a large index file with case switching for the majority of pages, with those pages then leading to others relating to their specific function. The database also employs ADODB for most of the operations involving database transactions. Pages involve the use of template's with javascript objects writing data to the page. Please note, this is quite the basic overview.

Network Share Method

The most simple method of making /lmce-admin available for editing outside of the core on your local network involves modifying samba. Please note: samba fixes itself on reboot and you will need to modify the config again to regain access to the files.

Edit /etc/samba/samba.conf and add this before the last line:

[www]
comment = Web server files
browseable = yes
writable = yes
create mask = 0770
directory mask = 0770
path = /var/www
public = no
guest ok = no
force user = www-data
force group = www-data

Then restart samba by typing into the console

/etc/init.d/samba restart

And now the lmce-admin directory will appear as a share on the local network.

Adding custom entries in LinuxMCE Admin menus

Currently only option is to enter entries into Pluto_main database, table PageSetup. There you'll find other entries already, go to the end and add yours (but be careful not to break anything and also save your changes, cause they can probably lost in migration or updates - not sure)...

Anyway for simple test I've created two entries: "Tinia" as main menu entry (after Telecom) and then subentry for phpmyadmin that I frequently use. If I highlight only important fields, my entries look like this :

PK_PageSetup FK_..._Parent Website OrderNum FK_Package Description   pageURL                   showInTopMenu
190  	    NULL  	        1  	70  	NULL  	Tinia  	   	                                 1  	
191 	    190 	        1 	0 	NULL 	PHPMyAdmin   http://192.168.0.1/phpmyadmin/ 	1

If FK_PageSetup_Parent is empty, then you'll have main entry on green main bar. If you want subentry, then you just specify PK_PageSetup of your parent in FK_PageSetup_Parent. You can also add URL