Medion MD1 NBC

From LinuxMCE
Revision as of 17:14, 29 September 2010 by Zaerc (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

Medion MD1 NBC

Medion MD1 NBC RF Remote Control

Medion MD1 NBC (Made in China by X10) is a RF Remote Controler.

It has all (almost) what you need to control your LinuxMCE. It uses 2 x 1.5V AAA batteries.

  • P/N: 20018268
  • FCC ID: B4S20018268

I`ve got it along with KNC ONE TV-Station DVR analog tv tuner card.

X10 Receiver

The X10 RF receiver need to be connected directly into the mainboard USB pin.

  • P/N: 20018267

Technical Specification:

It has CE mark so it is approved for use in the EU.

  • RF Frequency: 433 MHz
  • Operating range: 30m or 60feet (open field)
  • Can support up to 16 remotes
  • Works through walls using RF technology even when not aimed at the receiver

Setup

The device works with LMCE using LIRC. I`ve configured my device using Add_support_for_new_remote_controls guide.

Note:LinuxMCE will automatically load ati_remote kernel module which doesn`t seem to work. You need to prevent doing this by either doing

echo "blacklist ati_remote" >>/etc/modprobe.d/blacklist
as root or deleting the module.

My lircd.conf.