Merten 5024xx Connect Sensor Cover

From LinuxMCE
Revision as of 11:52, 23 December 2008 by DomoDude (Talk | contribs)

Jump to: navigation, search
Merten 5024xx

Status

Unknown

About

The Merten 5024xx is a push button that fits onto the Merten relay (and electronic switches?) of the Connect series.

Features

  • Really consists of 2 buttons: top and bottom half.

Device setup

Device type: Receiver

Inclusion/Exclusion/Node Info Frame

  • Triple click on connected switch within approx. 1.5 seconds.


Parameter values

FunctionValue

Switching additional CONNECT radio receivers

0

Factory reset

  • Press the connected button 3 times within 1.5 seconds. The LED will flash.
  • Press and hold the button for about 5 seconds until the LED turns off.

Links

http://www.merten.de/download