Merten 5024xx Connect Sensor Cover
Revision as of 10:46, 23 December 2008 by DomoDude (New page: Category: Hardware Category: Lighting Automation Category: ZWave = Status = Unknown = About = The Merten 5024xx is a push button that fits onto the Merten relay (and electron...)
The Merten 5024xx is a push button that fits onto the Merten relay (and electronic switches?) of the Connect series.
- Really consists of 2 buttons: top and bottom half.
Device type: Receiver
Inclusion/Exclusion/Node Info Frame
- Triple click on connected switch within approx. 1.5 seconds.
Switching additional CONNECT radio receivers
- Press the connected button 3 times within 1.5 seconds. The LED will flash.
- Press and hold the button for about 5 seconds until the LED turns off.