Merten 5024xx Connect Sensor Cover

From LinuxMCE
Revision as of 14:52, 28 September 2010 by Zaerc (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information
Merten 5024xx




The Merten 5024xx is a push button that fits onto the Merten relay (and electronic switches?) of the Connect series.


  • Really consists of 2 buttons: top and bottom half.

Device setup

Device type: Receiver

Inclusion/Exclusion/Node Info Frame

  • Triple click on connected switch within approx. 1.5 seconds.

Parameter values


Switching additional CONNECT radio receivers


Factory reset

  • Press the connected button 3 times within 1.5 seconds. The LED will flash.
  • Press and hold the button for about 5 seconds until the LED turns off.