Merten 5071xx Connect Radio Push Button 2gang

From LinuxMCE
Revision as of 14:54, 28 September 2010 by Zaerc (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information
Merten 5071xx

Status

Working

About

The Merten 5071xx is a 2gang Z-Wave battery powered remote controller that can be screwed or stuck to a surface.

Features

  • 2gang
  • special door bell mode (not yet tested)

Device setup

Device type: Controller

Inclusion/Exclusion/Node Info Frame

  • triple click on connected switch

Input setup

ButtonAssociation GroupParameter no
Top10
Bottom21

Parameter values

FunctionValue

Switching/Dimming/Shutters

0

Switching single-surface

4

Retrieve scene

60

Doorbell function

44

Move shutter single surface (changes direction each press)

54

Lower shutter as long as button is pressed

52

Raise shutter as long as button is pressed

55

Factory reset

  • Press button 3 times within 1.5 seconds. The LED will flash.
  • Press and hold the button for about 5 seconds until the LED turns off.

Links

http://www.merten.de/download