NOAA Weather

From LinuxMCE
Revision as of 17:06, 27 July 2008 by Jspeckman (Talk | contribs)

Jump to: navigation, search

This device retrieves weather data from weather.gov. Using an ICAO identifier for a nearby airport, the weather data should be fairly accurate for your area. Not quite as good or up to date as a weather station in your back yard, it does a decent job. Keep in mind the data is only updated once per hour at 15 past.

How to setup the NOAA Weather GSD


Device Template

  • Description - NOAA Weather
  • Implements DCE
  • Device Category - Environment Climate Device #83
  • Comm Method - Ethernet
  • Commands - Ruby internal commands


GSD Code

  • New Climate Commands (These are added under Advanced->DCE->Commands)
  • #923 Get Humidity
get_weather_data_request("Humidity")
  • #921 Get Temperature
get_weather_data_request("Temperature")
  • #922 Get Weather
get_weather_data_request("Weather")


  • #395 Check for updates
check_weather()
  • #396 Check for updates done
check_weather_done()
  • #373 Private Method Listing
### Logging function
def log(word)
  $logFile.print( Time.now.to_s + " " + word + "\n" )
  $logFile.flush()
end

### Weather check function
def check_weather()
  log("Backing up previous data")
  oldweather = $weather
  oldtemp = $temp
  oldpressure = $pressure
  olddew_point = $dew_point
  oldheat_index = $heat_index
  oldwindchill = $windchill
  oldhumidity = $humidity
  oldwind = $wind
  oldvisibility = $visibility

  log("Checking for weather updates")

### Get xml file from NOAA
# xmlPath = "www.weather.gov/xml/current_obs/"+$identifier+".xml"
# h = "GET "+xmlPath+" HTTP/1.0\r\n"
# log("HTTP Request: #{h}")
# conn_.Send(h)
# resv = ""
# while(true)
# buff = conn_.Recv(16384, 5000)
# if buff.length() == 0
# break
# end
# recv = recv + buff
# end
  h = Net::HTTP.new('www.weather.gov', 80)
  data_loc = "/xml/current_obs/"+$identifier+".xml"
  resp, data = h.get(data_loc, nil)

  if resp.message == "OK"

# if recv =~ /^HTTP[^\r\n]+200\sOK.+?\r\n\r\n(.+)$/m
# data = $1
# log("Recieved:\n#{data}")

    data.each_line {|line|
      if line =~/location>(.*)<\/location>/
        $location = $1
      end
      if line =~/observation_time_rfc822>(.*)<\/observation_time_rfc822>/
        $obs_time = $1
      end
      if line =~/weather>(.*)<\/weather>/
        $weather = $1
      end
      if $units == "F"
        if line =~/temp_f>(.*)<\/temp_f>/
          $temp = $1
        end
        if line =~/pressure_in>(.*)<\/pressure_in>/
          $pressure = $1
        end
        if line =~/dewpoint_f>(.*)<\/dewpoint_f>/
          $dew_point = $1
        end
        if line =~/heat_index_f>(.*)<\/heat_index_f>/
          $heat_index = $1
        end
        if line =~/windchill_f>(.*)<\/windchill_f>/
          $windchill = $1
        end
      else
        if line =~/temp_c>(.*)<\/temp_c>/
          $temp = $1
        end
        if line =~/pressure_mb>(.*)<\/pressure_mb>/
          $pressure = $1
        end
        if line =~/dewpoint_c>(.*)<\/dewpoint_c>/
          $dew_point = $1
        end
        if line =~/heat_index_c>(.*)<\/heat_index_c>/
          $heat_index = $1
        end
        if line =~/windchill_c>(.*)<\/windchill_c>/
          $windchill = $1
        end
      end
      if line =~/relative_humidity>(.*)<\/relative_humidity>/
        $humidity = $1
      end
      if line =~/wind_string>(.*)<\/wind_string>/
        $wind = $1
      end
      if line =~/visibility_mi>(.*)<\/visibility_mi>/
        $visibility = $1
      end
    }
  end

### Send out events for weather changes
  if $weather != oldweather
    ms = "/usr/pluto/bin/MessageSend dcerouter "+device_.devid_.to_s+" -1001 2 75 13 \""+$weather+"\""
    system(ms)
    log("Sent: #{ms}")
  end
  if $temp != oldtemp
    ms = "/usr/pluto/bin/MessageSend dcerouter "+device_.devid_.to_s+" -1001 2 25 13 \""+$temp+"\""
    system(ms)
    log("Sent: #{ms}")
  end
  if $humidity != oldhumidity
    ms = "/usr/pluto/bin/MessageSend dcerouter "+device_.devid_.to_s+" -1001 2 26 13 \""+$humidity+"\""
    system(ms)
    log("Sent: #{ms}")
  end
  check_weather_done()
end

### Post weather check
def check_weather_done()
  log("Weather data from: "+$obs_time)
  log("Weather check complete")
end

### Requests for weather data
def get_weather_data_request(request)
  case request
    when "Temperature"
      log('Recieved: Get Temperature request')
      ms = "/usr/pluto/bin/MessageSend dcerouter "+device_.devid_.to_s+" -1001 2 76 13 \""+$temp+"\""
      system(ms)
      log("Sent: #{ms}")
    when "Weather"
      log('Recieved: Get Weather request')
      ms = "/usr/pluto/bin/MessageSend dcerouter "+device_.devid_.to_s+" -1001 2 77 13 \""+$weather+"\""
      system(ms)
      log("Sent: #{ms}")
    when "Humidity"
      log('Recieved: Get Humidity request')
      ms = "/usr/pluto/bin/MessageSend dcerouter "+device_.devid_.to_s+" -1001 2 78 13 \""+$humidity+"\""
      system(ms)
      log("Sent: #{ms}")
  end
end

* #351 Process IDLE
<pre>
### Auto check weather every quarter past the hour per NOAA
t = Time.now

if t.min == 15
  t -= (60 * 60)

  if $obs_time =~/(\d\d):\d\d:\d\d/
    obs_hour = $1
  end

  if t.hour != obs_hour.to_i
    log("Quarter past the hour and weather update needed")
    check_weather()
  end
end
  • #355 Process Initialize
###
# NOAA Weather check
# 2008 Jason Speckman
###
require 'net/http'

# Init Vars

$logFile = File.new("/var/log/pluto/NOAA_Weather.log", "w")

### Change these values to match device data values
$DEVICEDATA_ICAO_CONST = 249
$DEVICEDATA_UNITS_CONST = 250

$units = ""
$identifier = ""
$location = ""
$obs_time = ""
$weather = ""
$temp = ""
$pressure = ""
$dew_point = ""
$heat_index = ""
$windchill = ""
$humidity = ""
$wind = ""
$visibility = ""

### Check for identifier and units
if device_.devdata_ != nil
  if device_.devdata_[$DEVICEDATA_ICAO_CONST] != nil
    $identifier = device_.devdata_[$DEVICEDATA_ICAO_CONST]
    log("ICAO identifier: "+$identifier)
  else
    log("No ICAO identifier specified")
  end
  if device_.devdata_[$DEVICEDATA_UNITS_CONST] != nil
    $units = device_.devdata_[$DEVICEDATA_UNITS_CONST]
  else
    $units = "F"
  end
end

log("Units in degrees "+$units)

if $units == "F"
  $press_units = "in. Hg"
else
  $press_units = "hPa"
end


### Tell DCE we are a climate device
log("Starting NOAA Weather Check")
log("Setup message intercept for DCERouter")

###
# devIDfrom: device_.devid_ = my device id
# devIDto: -1000 = dcerouter
# priority: 
# type: 1 = command, 2 = event
# id: 

$devIDfrom = device_.devid_
devIDto = -1000
priority = ""
type = 2
id = ""

#cmd = Command.new(devIDfrom, devIDto, priority, type, id)
#cmd.params_[x] = y
#SendCommand(cmd)

#ms = "/usr/pluto/bin/MessageSend dcerouter " + device_.devid_.to_s + " -1000 8 0 5 2 4 10"
#system(ms)

log("Init complete")

### Initial weather check
check_weather()
  • #356 Process Release
if ($logFile != nil) then
	$logFile.close
end


Device Data

(These variable numbers may be different, be sure to update them in the ruby code)

  • #249 ICAO Location Indicator(string) - Comment: Local airport identifier for weather info - (Required and Allowed to modify checked)
  • #250 Units(string) - Comment: Degree units. Either (F) or (C) - (Required and Allowed to modify checked)


Commands device responds to

  • Get Humidity #923
  • Get Temperature #921
  • Get Weather #922

Events Sent by Device

  • Temperature Changed #25 - Temperature has changed since last update
  • Weather Changed #75 - Weather has changed since last update
  • Humidity Changed #26 - Humidity has changed since last update

New climate events

(Need to be added, I had to put them directly into the db since the admin interface would not)

  • Get Temperature Response #76 - Response for Get Temperature command
  • Get Weather Response #77 - Response for Get Weather command
  • Get Humidity Response #78 - Response for Get Humidity command


Issues and TODO

  • 2008-07-06 Testing new features.
  • 2008-07-26 Updated code with new features
  • Fixed weather.gov xml url
  • Does not respond to events (Added)
  • Only send weather info when there is a change from the previous weather check (Done)
  • Only sends weather conditions and temperature changes (Added humidity)
  • No way to ask for weather data from the device (Done)