Difference between revisions of "Security breach"

From LinuxMCE
Jump to: navigation, search
m (layout changes)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 +
{{Versioninfo}}
 
{{stub}}
 
{{stub}}
1.                  Add your ZWave lights
+
# Add your ZWave lights
 
+
# Add the dsc panel.(''what is a dsc panel?'')  Then add the alarm sensors.
2.                  Add the dsc panel.(''what is a dsc panel?'')  Then add the alarm sensors.
+
# Turn on the Bluetooth mobile phone and enter the phone number for the phone (use a phone with service).  Enter it like you would dial it.
 
+
# Add your Panasonic ip camera.  It will ask which lights it can view and which sensors it’s close to.  Associate it with the zwave light and an alarm sensor.
3.                  Turn on the Bluetooth mobile phone and enter the phone number for the phone (use a phone with service).  Enter it like you would dial it.
+
# Quick reload router, and arm the alarm (your default pin is 1234)
 
+
# Trip the sensor.  Immediately the light associated with the sensor should come on and it should archive the camera video.
4.                  Add your Panasonic ip camera.  It will ask which lights it can view and which sensors it’s close to.  Associate it with the zwave light and an alarm sensor.
+
# You should hear a 30 second countdown, and then the TV turns on and plays the security breach video
 
+
# The mobile phone should ring and say ‘Security breach’ plus the name of the sensor, and offer to connect.
5.                  Quick reload router, and arm the alarm (your default pin is 1234)
+
# When you say ‘yes’, you should see the WAP page with the description of the breach.
 
+
# If you hit the ‘talk’ button on the phone, the m/d’s should call you so you can speak through the house with the phone.
6.                  Trip the sensor.  Immediately the light associated with the sensor should come on and it should archive the camera video.
+
# Pressing the reset alarm button on the phone should reset the alarm
 
+
# in the LinuxMCE-admin web site should be a log of the breach with an archive of the video from the cameras.
7.                  You should hear a 30 second countdown, and then the TV turns on and plays the security breach video
+
 
+
8.                  The mobile phone should ring and say ‘Security breach’ plus the name of the sensor, and offer to connect.
+
 
+
9.                  When you say ‘yes’, you should see the WAP page with the description of the breach.
+
 
+
10.              If you hit the ‘talk’ button on the phone, the m/d’s should call you so you can speak through the house with the phone.
+
 
+
11.              Pressing the reset alarm button on the phone should reset the alarm
+
 
+
12.              in the LinuxMCE-admin web site should be a log of the breach with an archive of the video from the cameras.
+
  
 
[[Category:Security]]
 
[[Category:Security]]

Latest revision as of 13:44, 19 June 2011

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information
This article is a stub and requires expansion


  1. Add your ZWave lights
  2. Add the dsc panel.(what is a dsc panel?) Then add the alarm sensors.
  3. Turn on the Bluetooth mobile phone and enter the phone number for the phone (use a phone with service). Enter it like you would dial it.
  4. Add your Panasonic ip camera. It will ask which lights it can view and which sensors it’s close to. Associate it with the zwave light and an alarm sensor.
  5. Quick reload router, and arm the alarm (your default pin is 1234)
  6. Trip the sensor. Immediately the light associated with the sensor should come on and it should archive the camera video.
  7. You should hear a 30 second countdown, and then the TV turns on and plays the security breach video
  8. The mobile phone should ring and say ‘Security breach’ plus the name of the sensor, and offer to connect.
  9. When you say ‘yes’, you should see the WAP page with the description of the breach.
  10. If you hit the ‘talk’ button on the phone, the m/d’s should call you so you can speak through the house with the phone.
  11. Pressing the reset alarm button on the phone should reset the alarm
  12. in the LinuxMCE-admin web site should be a log of the breach with an archive of the video from the cameras.