Serial Card (Syba)

From LinuxMCE
Revision as of 03:17, 11 October 2011 by Twodogs (Talk | contribs) (Created page with "{{versioninfo|810Status=applies|810UpdatedDate=25 Aug 2011|810UpdatedBy=twodogs}} Category: Tutorials Category: Hardware Category:Telecom Category:VoIP {| align="...")

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 applies 25 Aug 2011 twodogs
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

Contents


Want to get rid of that expensive telephone service? Want to connect your phone to your LinuxMCE home automation system? Want to spend hours of frustrating software configuration? Of course!

This tutorial shows how to get your existing analog phone to work with VOIP using the Broadvoice service provider and an SPA3102. However, any Sipura/Linksys/Cisco SPA-XXXX is configured almost identically. This family of devices was originally designed by Sipura, then bought by Linksys (owned by Cisco). Also, if you chose another VOIP provider, it should not cause too many problems as long as it is recognized by linuxMCE.

http://wiki.linuxmce.org/index.php/VOIP_Service_Providers


Glossary