Serial Hack

From LinuxMCE
Revision as of 15:18, 27 September 2007 by Trout (Talk | contribs) (don't need to ask for more trouble on the main page.)

Jump to: navigation, search

Serial List Hack

In some situations, (which, I might add are becoming more and more common now) a core or core/hybrid may not have enough, or indeed, any serial ports for automation kit such as the X10 modules to jack into.

In these cases a USB-to-Serial converter may be used, but LinuxMCE does not list these correctly in its admin pages. This is due to the script "/usr/pluto/bin/" which creates the list of serial ports, not giving the correct path (usually /dev/ttyUSB#, where # is a number).

A simple replacement, which, while inferior to the current script in that it does not detect the ports in use, does correctly list all serial ports, both USB and normal serial. However, it requires the 'tree' command, so:

sudo apt-get install tree

Once that has completed, tree will have been installed, and we can use its '-fi' mode to produce full paths, then it is just a simple matter of removing the origional file and writing our own, I use vim for this, but any other terminal or graphical text editor will do the job (see Editing_Text):

sudo rm /usr/pluto/bin/
sudo vim /usr/pluto/bin/

Now that vim is open, enter the following:


tree -fi /dev | grep ttyS
tree -fi /dev | grep ttyUSB