ShuttleX50V2

From LinuxMCE
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Not Working 1st May 2010 BongoWongo
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

This page is compliant with 0810 Beta | Current status : Not working/Should work

Shuttle X50 V2 [1]

It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.

How to get it working.

Diskless Boot

Before you did this you already did /urs/pluto/CREATEDISKLESSTBZ.sh <search correct script>

Download the driver from ftp://jmicron.com.tw/jmc2xx/Linux/

Do the following in "terminal"

$ tar xjvf jme-1.0.5.tbz2
$ cd jme-1.0.5
$ make install


copy the module to the running kernel:

cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/

To get a NIC to work, you have to modify a file, type the following in "terminal"

$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules

and add a single line for your NICs kernel module. In the above case the name of the module is

jme

Tried to PXE Boot it, with snapshot XXXXX

This resulted in a kernel panic as described in http://forum.linuxmce.org/index.php?topic=8386.0

This means that the network drivers (JMicron JMC261 single-chip PCIe Fast Ethernet) are not there or loaded properly. I am searching for a solution. This could be one of the solutions http://ubuntuforums.org/showthread.php?t=1402076

This page is a work in progress