From LinuxMCE
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Not Working 1st May 2010 BongoWongo
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

This page is compliant with 0810 Beta | Current status : Not working/Should work

Shuttle X50 V2 [1]

It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.

How to get it working.

Diskless Boot

Before you did this you already did /urs/pluto/ <search correct script>

Download the driver from

Open a "terminal" and type the following

$ tar xjvf jme-1.0.5.tbz2
$ cd jme-1.0.5
$ make install

copy the module to the running kernel

$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/

To get a NIC to work, you have to modify a file, type the following in "terminal"

$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules

and add a single line for your NICs kernel module. In the above case the name of the module is


Tried to PXE Boot it, with snapshot XXXXX

This resulted in a kernel panic as described in

This means that the network drivers (JMicron JMC261 single-chip PCIe Fast Ethernet) are not there or loaded properly. I am searching for a solution. This could be one of the solutions

This page is a work in progress