From LinuxMCE
Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Not Working 1st May 2010 BongoWongo
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

This page is compliant with 0810 Beta | Current status : Not working/Should work

Shuttle X50 V2 [1]

It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.

How to get it working.

Diskless Boot

The driver for the JMicron JMC250 PCI Express Gigabit Ethernet controller needs to be first installed, before the MD will netboot.

Download the file jme-1.0.5.tbz2 which contains the driver from

Open a "terminal" and type the following

$ tar xjvf jme-1.0.5.tbz2
$ cd jme-1.0.5
$ make install

copy the module to the running kernel

$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/

To get a NIC to work, you have to modify a file, type the following in "terminal"

$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules

and add a single line for your NICs kernel module. In the above case the name of the module is


After adding the above line (and saving the change of course), you have to recreate the initial ramdisk.


or maybe

mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd

is enough.

This will create a new initial ramdisk for the first boot of new MDs containing the jme module. Now, the first boot of the diskless MD will succeed and a new diskless media director will be created.

It now hangs in the kubuntu screen, I need to put the drivers somewhere, working on it now


This page is a work in progress