|Version||Status||Date Updated||Updated By|
|810||Works, not pnp||8th September 2010||BongoWongo|
This page is compliant with 0810 Beta | Current status : working, not plug and play
Shuttle X50 V2 
It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.
How to get it working.
- Unrecognized nic
The driver for the JMicron JMC250 PCI Express Gigabit Ethernet controller needs to be first installed, before the MD will netboot.
Download the file jme-1.0.5.tbz2 which contains the driver from ftp://jmicron.com.tw/jmc2xx/Linux/
Open a "terminal" and type the following
$ tar xjvf jme-1.0.5.tbz2 $ cd jme-1.0.5 $ make install
copy the module to the running kernel
$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/
To get a NIC to work, you have to modify a file, type the following in "terminal"
$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules
and add a single line for your NICs kernel module. In the above case the name of the module is
After adding the above line (and saving the change of course), you have to recreate the initial ramdisk.
mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd
This will create a new initial ramdisk for the first boot of new MDs containing the jme module. Now, the first boot of the diskless MD will succeed and a new diskless media director will be created.
Turn it off
Used a keyboard to go through all of the wizards, went into KDE Desktop, installed latest galexy drivers. Touchscreen works, but has the tendency to double tap. Ignore first event, does not work.
This page is a work in progress