From LinuxMCE
Revision as of 17:13, 29 January 2012 by Bongowongo (Talk | contribs)

Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Works, not pnp 8th of December 2010 BongoWongo
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

This page is compliant with 0810 Beta | Current status : working, not plug and play

Shuttle X50 V2 [1]

It is a 15,4 inch touchscreen with an atom processor, with builtin camera, microphone and speakers. Ideal for a kitchen situation.


  • Nice esthetics
  • All in one


  • Intel GMA is not the best card for LinuxMCE
  • Needs configuring

How to get it working.

Diskless Boot

Unrecognized NIC

The driver for the JMicron JMC26X PCI Express Gigabit Ethernet controller needs to be first installed, before the MD will netboot.

Open a "terminal" and type the following

$ sudo su
$ cd ~
$ wget
$ apt-get install unrar -y
$ unrar x jme-
$ cd jme-
$ make install
$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/

Then it is needed to modify the file modules by adding a new line with 'jme'

$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules
$ /usr/pluto/bin/

Boot your MD the first time. After the MD was running the 'Diskless_Setup' and you quick reloaded the router, you have to copy the driver and adding a line with 'jme' into modules for the new created MD.

$ sudo cp /lib/modules/2.6.27-17-generic/kernel/drivers/net/jme.ko /usr/pluto/diskless/<MD#>/lib/modules/2.6.27-17-generic/kernel/drivers/net/jme.ko
$ sudo nano /usr/pluto/diskless/<MD#>/etc/modules
$ sudo nano /usr/pluto/diskless/<MD#>/etc/initramfs-tools/modules

Then in a terminal

$ cd /usr/pluto/diskless/
$ chroot <mediadirector-id>
$ depmod
$ cd /boot
$ mkinitramfs -o initrd.img-`uname -r` `uname -r`
$ exit

This will create a new initial ramdisk for the first boot of new MDs containing the jme module. Now, the first boot of the diskless MD will succeed and a new diskless media director will be created. After reboot of your MD, the setup-wizzard should appear on screen.

  1. ACPI

Turn it off

Needs more info


Used a keyboard to go through all of the wizards, went into KDE Desktop, installed latest Egalax drivers. Touchscreen works, but has the tendency to double tap. Ignore first event, does not work.

Needs more info

Other remarks, needed investigation

  1. Could not get a higher resolution than 640x480, need to configure videocard proper. Driver/Xorg.conf possible solution => install intel ppa drivers

sudo apt-get remove -purge nvidia*

  1. Makes strange dark beep when booting
  2. As I do not use it and I was in troubleshooting modus, I disconnected the wifi, so cannot comment on it
  3. Webcam and microphone are not tested yet

This page is a work in progress