Difference between revisions of "ShuttleXS35GT"

From LinuxMCE
Jump to: navigation, search
Line 54: Line 54:
 
#'''ACPI'''
 
#'''ACPI'''
 
Turn it off
 
Turn it off
 
==Other remarks, needed investigation==
 
#Could not get a higher resolution than 640x480, need to configure videocard proper. Driver/Xorg.conf possible solution => install intel ppa drivers
 
sudo apt-get remove -purge nvidia*
 
http://forum.linuxmce.org/index.php?topic=9149.0
 
#Makes strange dark beep when booting
 
#As I do not use it and I was in troubleshooting modus, I disconnected the wifi, so cannot comment on it
 
#Webcam and microphone are not tested yet
 
This page is a work in progress
 

Revision as of 15:52, 9 December 2010

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Works, not pnp 8th December 2010 BongoWongo
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

This page is compliant with 0810 Beta | Current status : working, not plug and play

Shuttle XS35GT [1]

Pro's

  • Nice esthetics
  • Ion platform
  • Mountable on monitor/tv

Cons

  • Needs configuring

How to get it working.

Diskless Boot

  1. Unrecognized NIC

The driver for the JMicron JMC250 PCI Express Gigabit Ethernet controller needs to be first installed, before the MD will netboot. Download the file jme-1.0.5.tbz2 which contains the driver from ftp://driver.jmicron.com.tw/Ethernet/Linux/

Open a "terminal" and type the following

$ tar xjvf jme-1.0.5.tbz2
$ cd jme-1.0.5
$ make install

copy the module to the running kernel

$ cp jme.ko /lib/modules/2.6.27-17-generic/kernel/drivers/net/

To get a NIC to work, you have to modify a file, type the following in "terminal"

$ sudo <editor-of-choice> /etc/initramfs-tools-interactor/modules

and add a single line for your NICs kernel module. In the above case the name of the module is

jme

After adding the above line (and saving the change of course), you have to recreate the initial ramdisk.

/usr/pluto/bin/Diskless_BuildDefaultImage.sh

or maybe

mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd

is enough.

This will create a new initial ramdisk for the first boot of new MDs containing the jme module. Now, the first boot of the diskless MD will succeed and a new diskless media director will be created.

  1. ACPI

Turn it off