Difference between revisions of "USB UIRT"

From LinuxMCE
Jump to: navigation, search
m
Line 1: Line 1:
 +
{{versioninfo}}
 
[[Category: Infrared]]
 
[[Category: Infrared]]
  

Revision as of 06:41, 3 May 2010

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information
USB UIRT.jpg

Use in LinuxMCE

Connection

  • This device is Plug&play, which means no significant amount of modifications are required to get it to work. Don't forget to Quick reload router after installation is complete.
  • MAKE SURE YOU HAVE PERFECTLY GOOD BATTERIES IN YOUR REMOTE, IF YOU ENCOUNTER PROBLEMS RECORDING IR CODES

Adding Remotes

Controlling AV Devices

  • AV Devices is the main page used for making and adjusting control over A/V Equipment.
  • Also take a look at Infrared Codes if you are having problems with the prepopulated Codesets.

Sales Pitch

The USB-UIRT, along with Automation Software such as LinuxMCE, allows your PC to both Receive and Transmit infrared signals -- exactly like those used by the collection of remote controls you've acquired for your TV, VCR, Audio System, etc. The USB-UIRT can:

  • Receive signals from the remote controls you already have (allowing your PC to perform actions when the 'Play' button is pressed on your VCR remote, for example)
  • 'Learn' from remotes you already have and Transmit a duplicate of these signals from your PC (for example, your PC could automatically turn ON your VCR and tune it to channel 3)
  • Use codes available from the Web for other remotes (such as the Philips Pronto) to control all of your equipment with Remote (IR) receivers (including special 'discrete' remote codes your brand-name remote doesn't include!). For example, the USB-UIRT could transmit the discrete 'Input 3' code to your TV to directly switch it to input 3, rather than cycling through all of the inputs.

Technical Details

IR Reception

  • 34-40KHz Frequency Range
  • 56KHz IR Receiver Add-On Option*
  • UIR-compatible Receiver Mode
  • >8 Meter Sensitivity
  • IR Wavelength Filtered
  • USB Wake-from-Standby Capability
  • Built-in wideband IR detector for accurate Learning, including carrier frequency.
  • USB Wake-from-Standby Capability

IR Transmission

  • 20-60KHz Frequency Range
  • Two (2) built-in High-Power Emitters
  • 1/8" Mini-Jack for External Emitters
  • UIRT-compatible Struct and Raw modes
  • Extended-length code support in hardware (up to 96burst-pairs)
  • Max-length burst code support in driver (up to 2048 burst-pairs)

Dimensions

  • 2.4"W x 1.5"D x 0.7"H

Troubleshooting (0710)

Because of a bug within ftdi_sio.c, the UIRT can't transmit commands....

SethJ has prepared an excellent description of the fix.

Availability

USA : http://www.usbuirt.com Europe : http://www.hightechpad.com/?q=content/usb-uirt-56k-enchanced-version

See also