Difference between revisions of "User:Alx9r"

From LinuxMCE
Jump to: navigation, search
(Bill of Materials)
(Bill of Materials)
Line 66: Line 66:
 
| comes with [[Windows MCE Remote]]
 
| comes with [[Windows MCE Remote]]
 
|-
 
|-
| HDD
+
| HDD 1
 
| Hitachi Deskstar P7K500 500GB SATA2 7200RPM 16MB 3.5IN  
 
| Hitachi Deskstar P7K500 500GB SATA2 7200RPM 16MB 3.5IN  
 
| $87.20
 
| $87.20
|  
+
| media drive
 +
|-
 +
| HDD 2
 +
| Seagate Barracuda 7200.10 80GB SATA2 2MB 11MS 7200RPM Hard Drive
 +
| $42.64
 +
| system drive
 +
|-
 +
| SATA Cable
 +
| nGear Serial ATA SATA Right Angle Cable 18IN 7PIN
 +
| $2.69
 +
| 2 come with mobo, straight cable would be fine too, right angle was cheapest
 
|-
 
|-
 
| optical drive
 
| optical drive
Line 75: Line 85:
 
| $32.19
 
| $32.19
 
|  
 
|  
 +
|-
 +
| CD Audio Cable
 +
|
 +
| $3.00
 +
| to connect optical drive audio out to mobo onboard audio
 
|-
 
|-
 
| case
 
| case
Line 84: Line 99:
 
| OCZ StealthXStream OCZ500SXS 500W
 
| OCZ StealthXStream OCZ500SXS 500W
 
| $61.99
 
| $61.99
| cheap, works, apparently quiet
+
| cheap, works, fairly quiet
 
|}
 
|}
  

Revision as of 22:06, 11 May 2008

My Benchmark System Attempt

Note that I am in Canada and all prices are as paid before tax in CAD.

In May 2008, I began building a LinuxMCE test system. I wanted to see if I could replicate at least part of what I saw in the Video. The test system system will hopefully become my main working home theatre system.

AV gear-wise, I started with a completely clean slate here as I had nothing: No TV, no speakers, no receiver, no remotes -- a blank canvas. Nice. This is gonna be fun.

My criteria for the design of this system is as follows:

  1. Wherever possible use known-compatible and mainstream components.
  2. Wherever possible follow recommendations from forums, reviews, Video and wiki.
  3. Use components in the price/performance sweet spot.
  4. Aesthetics should be living-room friendly.
  5. Keep it simple, but still test the broad capabilities of LinuxMCE.

I intend to document the design and results from this system as completely as I can. That way, it can hopefully serve as a benchmark for others to replicate or at least learn from.

Hybrid Box

I am starting with a hybrid topology to keep my costs down. If all goes well, this hybrid box will become my core server that lives in a closet, and I will go to a smaller dedicated media director in my living room.

Criteria

In addition to the criteria I already mentioned, the design of my hybrid was also guided by the following:

  1. Only components available through ncix.com, preferably in stock.
  2. Tend toward components that lend themselves to eventual use as a dedicated core serving 2 or 3 media directors.

Bill of Materials

Component Model each Notes
Motherboard ASUS M2NPV-VM $94.01 used in Video, now out of production
breakout ASUS SPDIF-OUT/OPT $9.02 SPDIF breakout board
breakout ASUS 9PIN Serial Port Header $6.60 two of these to breakout COM ports
CPU AMD Athlon 64 X2 4600+ EE Dual Core Processor AM2 Windsor 2.4GHZ 512KBX2 65W 90NM $80.92 Video used 4400+, 4600+ is cheaper and maybe faster
heatsink Scythe Mini Ninja Heatpipe Fanless Heatsink AM2 $38.98 should be good enough to cool w/o CPU fan
RAM Kingston PC2-5300 512MB DDR2-667 CL5 240PIN DIMM $16.70 2 sticks
second ethernet adapter ENCORE ENL832-TX-RENT $8.68 based on Realtek_8139
TV Tuner Hauppauge WinTV-PVR-150 MCE $79.78 comes with Windows MCE Remote
HDD 1 Hitachi Deskstar P7K500 500GB SATA2 7200RPM 16MB 3.5IN $87.20 media drive
HDD 2 Seagate Barracuda 7200.10 80GB SATA2 2MB 11MS 7200RPM Hard Drive $42.64 system drive
SATA Cable nGear Serial ATA SATA Right Angle Cable 18IN 7PIN $2.69 2 come with mobo, straight cable would be fine too, right angle was cheapest
optical drive Pioneer DVR-212D Black 18X6X18 DVD+RW 18X8X18 DL 10X SATA 2MB $32.19
CD Audio Cable $3.00 to connect optical drive audio out to mobo onboard audio
case Silverstone Lascala LC17B $129.99 HTPC form factor, big enough to accomodate conversion to core
power supply OCZ StealthXStream OCZ500SXS 500W $61.99 cheap, works, fairly quiet

Assembly

May 9, 2008 - Only the SPDIF-OUT/OPT is still backordered. The rest of the parts have all arrived. The look of the Lascala case got a enthusiastic "Wow, it's pretty." from my fiancee. I was quite impressed by its look too. It should look right at home in the living room.

I built the kit in about 3 1/2 hours. It probably would have been quicker, but those hours were around midnight. There was enough room for all the ports on the backpanel -- I'm using 7 of 8 slots in the case, and both PCI slots on the motherboard (2nd ethernet, tv tuner). I was surprised at how good the optical drive looks in the case. The finished look is achieved by a piece of aluminum extrusion that is brushed and anodized to match the front panel that is double-face-taped to the drive tray. I was expecting a struggle to get the door to align with the case well enough to look good, but it looks pretty nice on the first try. Maybe I just got lucky. Regardless, I'm happy with the front panel.

There were only two things that I didn't like about this kit:

  1. The Scythe Mini Ninja Heatsink is so big that it obstructs access to much of the motherboard (put this guy in last). The real problem is that one of the clips that hold the heat sink in place is adjacent the side of the case and underneath the heatsink. This makes it a bit of a challenge to get the heat sink clipped in place. The clips themselves don't provide nearly as positive retention as the stock AMD heatsink. It does seem to be providing adequate cooling although I haven't stress tested this setup yet.
  2. The ATX12V 4-pin socket is on the corner of the motherboard furthest from the power supply. The supplied cable is barely long enough to reach, which eliminates the possibility of doing a nice routing job with that cable.

Hardware Testing

May 10, 2008 - Once the kit was assembled, I connected a mouse, keyboard, and an old Dell CRT via a VGA cable and pressed the power button. Nothing happened. I narrowed it down in a few minutes to the power button on the case. I swapped the power and reset cables and it fired up when I pressed the reset button. I'll investigate the DOA power button later.

The system hung during POST complaining of a failed CPU fan. I have no CPU fan, so it took a quick trip into the BIOS to disable that warning.

I ran the Memtest 86+ tool on the stresslinux boot disk for 7 hours with no errors. The "stress" option would not boot, so I haven't performed a processor stress test yet. I also ran the Hitachi Drive Fitness Test from its own boot disk. It also produced no errors. So far so good.

BIOS Tweaks

I made the following adjustments to the BIOS:

  • Disable CPU Fan Speed Warning (as mentioned above)

LinuxMCE Install

May 10, 2008 - I download a torrent of the Linux MCE 0710RC1 AMD64 DVD .iso and burned it to a DVD. I plugged the Realtek network card into my router, then I booted from install DVD and let the OS install. This took about 25 minutes. During that time it only prompted me to select the default password and the disk to install to, then at the end to remove the install DVD.

One thing that I didn't expect was the install-time screensaver. It basically just blanks the screen which cause my heart to sink as I thought something had gone wrong. The mouse did nothing to bring it back, but pressing the shift key worked fine. Whew.

Hauppauge 150

LinuxMCE did not detect the Hauppauge WinTV-PVR-150 MCE automatically. I followed the manual configuration directions.

Overall Impressions

The Lascala case is very nice. I'm sure there are even nicer-looking cases out there, but I picked mine up for only $130 so I am very happy with it.

With the case open the case and power supply fans are definitely noticeable. On the other hand, at about 4 feet they were quieter than my refrigerator at 20 feet. I don't suspect this will be an issue, but the fans were louder than I was expecting from the various case and power supply reviews I had read.

The other thing I liked was that the Silverstone Lascala case and M2NPV-VN motherboard seemed to be made for one another. All of the frontpanel ports had a place to plug into on the motherboard, and there were just enough slots in the case to accomodate all of the breakout boards. The CPU socket located perfectly so that the two quiet 80mm case fans draw air directly over the heat sink.

I was happy to see room for 6 hard drives in the Lascala case.

TV

A 40" wall-mounted LCD seemed like the right thing for my condominium's living room. The Video showed a Sharp Aquos LC-26D6U in the bedroom. Sharp seems to have good RS-232 control support -- as long as the control port is actually there.

I settled on the Sharp Aquos LCD LC42D64U because it met the following criteria:

  • Has RS-232 control.
  • Very close to the TV used in the Video.
  • Countless positive reviews, only a few reported issues.
  • 1080p
  • Got it for a decent price ($1499) and in my neighborhood. No shipping, brokerage, or duty.

Orbiter

The Hauppauge card in my kit comes with a Windows MCE Remote. Hopefully it will do the trick.

Glue

Miscellaneous items I ended up needing to put this system together:

  • Wall Mount for Sharp Aquos LC42D64U