Difference between revisions of "User:Techstyle"

From LinuxMCE
Jump to: navigation, search
(Outstanding Issues)
 
(10 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
   |}
 
   |}
  
I built my first LMCE system in the Summer of 2008, knowing nothing about Linux.  Since then I have learnt a bit about Linux and about LMCE but still have a way to go.  In November of 2008 I moved from the UK to the US.  My Hardware has evolved over time and I have included an early network setup (UK) and the current one (US) as well as a list of the hardware I am currently using.
+
I built my first LMCE system in the Summer of 2008, knowing nothing about Linux.  Since then I have learnt a bit about Linux and about LMCE but still have a way to go.  In November of 2008 I moved from the UK to the US.  My Hardware has evolved over time, here is a list of the hardware I am currently using.
  
  
 
= Software Setup =
 
= Software Setup =
  
Currently running Linux MCE 0810 Beta 2
+
Currently running Linux MCE 1004 RC1 upto date
  
  
Line 116: Line 116:
 
   | [[Image:Master_bed.JPG]]
 
   | [[Image:Master_bed.JPG]]
 
   |}
 
   |}
This MD is a Laptop that is connected to a network switch at various locations around the house but mainly in the Master Bedroom.
+
This MD is a Zotac ION based ITX board with a dual core Atom 330.
  
 
• Zotac Atom 330 ION with 2 Gb Ram
 
• Zotac Atom 330 ION with 2 Gb Ram
Line 126: Line 126:
 
• [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
 
• [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
  
• LG 32LC350 LCD Screen
+
• LG 32LC350 LCD Screen connected by RS232
  
  
Line 148: Line 148:
 
   |}
 
   |}
  
{| align="right"
 
  | [[Image:Techstyle_Bedroom.JPG]]
 
  |}
 
 
My Basement MD is mounted on the wall and the units case is hidden in the closet behind.  This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall
 
My Basement MD is mounted on the wall and the units case is hidden in the closet behind.  This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall
  
Line 175: Line 172:
  
  
= Mobile Orbiter =
 
  
 +
 +
{| align="right"
 +
  | [[Image:Techstyle_Bedroom.JPG]]
 +
  |}
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
= Mobile Orbiter =
 +
{| align="right"
 +
  | [[Image:Zt-180.JPG]]
 +
  |}
 
• [[XDAIIi|O2 XDA IIi]] connected via WIFI (802.11b)
 
• [[XDAIIi|O2 XDA IIi]] connected via WIFI (802.11b)
  
Line 212: Line 251:
  
 
• SS13A 3 Unit + Dim RF Style Switch
 
• SS13A 3 Unit + Dim RF Style Switch
 +
 +
•      [[DS18S20 1-Wire Temperature Sensor|DS18S20 1-Wire Temperature Sensor]] x 4 (Basement, Living Room, Master Bedroom and Inside the HVAC Ducting by the Furnace)
 +
 +
= Climate Equipment =
 +
 +
• Filtrete 3M-50 Wifi Thermostat
 +
 +
• 1-Wire DS9490R USB Interface
 +
 +
• 1-Wire DS18S20 digital thermometer x 5
 +
 +
Currently the 1-Wire stuff is not working
  
 
= Network Equipment =
 
= Network Equipment =
  
 
• Motorola Surfboard
 
• Motorola Surfboard
 +
 +
• Cisco-Linksys WRT310N Wireless-N Gigabit Router configured as a switch (SSID linuxmce-n)
  
 
• [[Linksys WRT54G|Linksys WRT54G]] router/WIFI Access point (SSID linuxmce)
 
• [[Linksys WRT54G|Linksys WRT54G]] router/WIFI Access point (SSID linuxmce)
Line 224: Line 277:
  
 
• Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used
 
• Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used
 +
  
 
= Network Setup =
 
= Network Setup =
  
Below is my network layout, both in the UK and US
+
Below is my network layout
  
== Network Setup - UK ==
+
== Network Setup - (red are gigabit, blue are 100M)==
  
[[Image:UK_Setup.jpg]]
+
[[Image:Techstyle_US_Setup.JPG]]
 
+
== Network Setup - US (red are gigabit, blue are 100M)==
+
 
+
[[Image:Techstyle_US_Setup.jpg]]
+
  
 
= Problems and Solutions =  
 
= Problems and Solutions =  
 
== Resolved Issues ==
 
== Resolved Issues ==
  
[http://wiki.linuxmce.org/index.php/XDAIIi XDA IIi] orbiter is not working - this is fixed, a rebuild took care of this
 
 
Media Director in the Study - this is fixed, a rebuild took care of this.  No media directors would work with my previous build
 
 
[http://wiki.linuxmce.org/index.php/Tesco_Internet_Phone Tesco Internet Phone] - The phone would lose connection after about 60 seconds, this was resolved and an Wiki page was added with the instructions on how to over come it.
 
 
Media disapearing from the database when a MD is started - When there are multiple drives on there is a problem with the StorageRadar scripts.  the fix is detailled [http://forum.linuxmce.org/index.php?topic=7636.0 here]
 
 
Get the Microphone to work with the Creative Labs Audigy2 ZS on our core - played around with ALSAMixer and this is now working
 
  
 
Set up Voicemail on Asterisk:
 
Set up Voicemail on Asterisk:
Line 255: Line 296:
 
== Outstanding Issues ==
 
== Outstanding Issues ==
  
1.  I can not get my NVIDIA 8600 to work, but don't really need it.
+
1.  Resolve HDPVR Choppiness
  
2.  Set up Bluetooth dongles in order to get the mobiles working - Blackberry 8300 Curve, Nokia 6085
+
2.  Get 1-Wire working
  
3.  Get the RS232 control of LG RZ-37LZ55 37” LCD TV working
+
3.  Get incoming calls under asterisk working
  
4. Replace the MCE remote IR reciver/Blaster with a USB UIRT to blast IR to the VSX-411 and the Scientific Atlanta Explorer 8300 cable box
+
4.
  
 
= General Notes =
 
= General Notes =

Latest revision as of 06:53, 28 February 2013


I built my first LMCE system in the Summer of 2008, knowing nothing about Linux. Since then I have learnt a bit about Linux and about LMCE but still have a way to go. In November of 2008 I moved from the UK to the US. My Hardware has evolved over time, here is a list of the hardware I am currently using.


Software Setup

Currently running Linux MCE 1004 RC1 upto date




My hardware is as listed below:

A/V Equipment

Core/MD1 (Hybrid - Living Room)

Living room.JPG


Gigabyte GA-M61SME-S2 with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard

• AMD Athlon 64 X2 5000+

• 2 x 1Gb DDRII

• Nvidia GeForce 8600GT 512Mb

ASUS NX1101 10/100/1000 LAN card (eth1)

• Creative Labs Audigy2 ZS (connected to receiver by Digital Coax)

• Samsung 1Tb SATAII drive

• Western Digital 200 Gb IDE drive (boot drive)

• 1.5 Gb SATAII drive

IOGear GBU421 Micro Bluetooth Dongle

• DVD Player with Lightscribe

• Wireless Keyboard

Wireless Trackball Mouse (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)

• Windows MCE Remote

• USB UIRT

• Sharp LC46D85UN LCD TV connected by RS232

Pioneer VSX-411 AV Receiver – ‘Blasted’ by the USB UIRT

Techstyle core.JPG

Hauppauge WinTV-PVR-150 MCE

• LG BD550 Blu Ray Player with Netflix

• Hauppauge HD PVR

• Xbox 360 with Kinect

• Scientific Atlanta Explorer 8300HD Cable Box

• Microphone















MD2 (Master Bedroom)

Master bed.JPG

This MD is a Zotac ION based ITX board with a dual core Atom 330.

• Zotac Atom 330 ION with 2 Gb Ram

• Hitachi 450Gb SATAII drive

• Gyration Keyboard

Wireless Trackball Mouse (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)

• LG 32LC350 LCD Screen connected by RS232








MD3 (Basement)

Basement-techstyle.JPG

My Basement MD is mounted on the wall and the units case is hidden in the closet behind. This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall


• Matsonic MS8147C VIA KT400 Chipset Socket A, Realtek RT8100B LAN (10/100 Mbit), AC’97 audio (sound did not work)

• AMD Athlon XP 2600+

• 3 x 256Mb PC133 DDR

• Elsa Erazor 8x AGP (Nvidia GeForce 440MX chipset) 128Mb

• Creative Labs 5.1 sound card

• Maxtor 40Gb IDE drive

• CDRom

• Viewsonic VE500 15” LCD Monitor

• Altec Lansing Quadrophonic Speakers

• Gyration Ultra GT Cordless Air mouse and Mini Keyboard



Techstyle Bedroom.JPG


















Mobile Orbiter

Zt-180.JPG

O2 XDA IIi connected via WIFI (802.11b)

Zenithink ZT-180 Android Pad connected via WIFI (802.11g)

Telecom Equipment

EP-636 SIP Phone

• Tesco Internet Phone IPA1000

Security Equipment

• Generic USB Webcam

• Linksys USB Quickcam

Automation Equipment

CM15A USB X10 Controller

• MS14A X10 Motion Sensor x 4

LM15A Socket Rocket x 5

• WS467 Wall Switch Module

• LM465 Lamp Module

• TM751 Mini Transceiver x 2

• KR19A SlimFire 2 Unit Remote

• KR22A 4 Unit Credit Card Controller

• SS13A 3 Unit + Dim RF Style Switch

DS18S20 1-Wire Temperature Sensor x 4 (Basement, Living Room, Master Bedroom and Inside the HVAC Ducting by the Furnace)

Climate Equipment

• Filtrete 3M-50 Wifi Thermostat

• 1-Wire DS9490R USB Interface

• 1-Wire DS18S20 digital thermometer x 5

Currently the 1-Wire stuff is not working

Network Equipment

• Motorola Surfboard

• Cisco-Linksys WRT310N Wireless-N Gigabit Router configured as a switch (SSID linuxmce-n)

Linksys WRT54G router/WIFI Access point (SSID linuxmce)

• 2 x D-Link DGS-2205 5-port 10/100/1000 Desktop Switch

• D-Link DL-604 router - Not Currently used

• Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used


Network Setup

Below is my network layout

Network Setup - (red are gigabit, blue are 100M)

Techstyle US Setup.JPG

Problems and Solutions

Resolved Issues

Set up Voicemail on Asterisk: I wanted to recieve e-mails when a voicemail was recieved by the system clickhereto learn how.

Outstanding Issues

1. Resolve HDPVR Choppiness

2. Get 1-Wire working

3. Get incoming calls under asterisk working

4.

General Notes

Sharp Aquous does not fit the screen. Modeline modification needed and turn of EDID.

Modeline "1920x1080@60" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync

is the new modeline