Difference between revisions of "User:UNi"

From LinuxMCE
Jump to: navigation, search
m (Components:)
m ('''LinuxMCE''')
Line 7: Line 7:
 
= '''LinuxMCE''' =
 
= '''LinuxMCE''' =
  
After having major crashing issues with LMCE, I found that it didn't like my video card so much and same video card was sharing an interrupt with my NIC.  I have resolved these issues by going back to my initial Video Card, and installing a new NIC which doesn't try to mate with my Vid Card's interrupt.  My box is very stable now and never crashes.
+
After having major crashing issues with LMCE, I found that it didn't like my video card so much (though others recommended it...); it would crash X-Windows.  Also video card was sharing an interrupt with my NIC.  I have resolved these issues by going back to my initial build Video Card, and installing a new NIC which doesn't try to mate with my Vid Card's interrupt.  My box is very stable now and never crashes and I'm really enjoying LMCE now.
  
  

Revision as of 18:53, 4 May 2009


About Me

I've been working with OpenBSD and Linux for 10 years, but never delved into X-Windows as I use OBSD mainly for LAMP functions. I live in Northern California (NorCAL) and work as a Network Engineer.

LinuxMCE

After having major crashing issues with LMCE, I found that it didn't like my video card so much (though others recommended it...); it would crash X-Windows. Also video card was sharing an interrupt with my NIC. I have resolved these issues by going back to my initial build Video Card, and installing a new NIC which doesn't try to mate with my Vid Card's interrupt. My box is very stable now and never crashes and I'm really enjoying LMCE now.


Next Steps

  • setup a MD after I'm sure the Core is stable and maybe wait until 810 before investing any more moola

Configuration

Core

Components:

CPU

Intel Dual-Core

MOTHERBOARD

ASUS P5NSLI LGA 775 NVIDIA nForce 570 SLI Intel Edition ATX Intel Motherboard

  • This motherboard seems to work but I got a ton of "rtc: lost some interrupts at 1024Hz" in Syslog and no one seems to know why...


  • µATX
  • 4x DDR2 Slot
  • GF 7600
  • onboard 5.1 Audio
  • 1x Gigabit Marvell LAN
  • 1x PCI-E 16x
  • 2x PCI-E 1x
  • 1x PCI

RAM

2GB Infineon CL5

Video Card

BFG Tech BFGR76256GTOCE GeForce 7600GT 256MB

STORAGE

Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM


PSU

CASE

Enermax


OTHER

CPU-FAN:

Media Directors

none so far


Automation

  • Added a Linksys Wireless-G Internet Video Camera WVC54GCA, and enabled motion module