I've been working with OpenBSD and Linux for 10 years, but never delved into X-Windows as I use OBSD mainly for LAMP functions. I live in Northern California (NorCAL) and work as a Network Engineer.
After having major crashing issues with LMCE, I found that it didn't like my video card so much and same video card was sharing an interrupt with my NIC. I have resolved these issues by going back to my initial Video Card, and installing a new NIC which doesn't try to mate with my Vid Card's interrupt. My box is very stable now and never crashes.
- setup a MD after I'm sure the Core is stable and maybe wait until 810 before investing any more moola
- This motherboard seems to work but I got a ton of "rtc: lost some interrupts at 1024Hz" in Syslog and no one seems to know why...
- 4x DDR2 Slot
- GF 7600
- onboard 5.1 Audio
- 1x Gigabit Marvell LAN
- 1x PCI-E 16x
- 2x PCI-E 1x
- 1x PCI
2GB Infineon CL5
BFG Tech BFGR76256GTOCE GeForce 7600GT 256MB
Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
none so far
- Added a Linksys Wireless-G Internet Video Camera WVC54GCA, and enabled motion module