http://wiki.linuxmce.org/api.php?action=feedcontributions&user=Pnuts&feedformat=atomLinuxMCE - User contributions [en]2024-03-29T11:20:16ZUser contributionsMediaWiki 1.24.1http://wiki.linuxmce.org/index.php?title=MSI_Wind_Nettop&diff=19537MSI Wind Nettop2009-06-30T00:52:00Z<p>Pnuts: /* Disadvantages */</p>
<hr />
<div>[[Category: Hardware]] <br />
[[Category: Media Directors]]<br />
[[Category: Barebones]]<br />
[[Category: Nettops]]<br />
<br />
The MSI Wind Nettop is a very small, ultra low power consumption Intel Atom based PC that can be used as an MD. This is a low end, very low cost barebones PC that already includes a CPU. So for MD usage, you just need to add a stick of RAM and you're done!<br />
<br />
It is available from NewEgg (they do not ship internationally) for US$149.99, [http://www.newegg.com/Product/Product.aspx?Item=N82E16856167037 here].<br />
<br />
[[Image:MSI_Wind_PC.jpg|thumb|right|300px|MSI Wind Nettop]]<br />
<br />
This is almost Identical to the [http://wiki.linuxmce.org/index.php/MSI_Wind_PC MSI Wind PC] except that it has a dual core cpu.<br />
<br />
== System Specs ==<br />
<br />
* Small foot print - 300x260x65mm<br />
* Intel 1.6GHz Atom 330 (dual core) on board<br />
* 7.1 Surround sound - analogue minijacks<br />
* Almost noiseless<br />
* Low energy consumption - designed to operate at full speed using only 35W<br />
<br />
== Disadvantages ==<br />
<br />
* Video is analogue - no DVI or HDMI<br />
* Audio is analogue - no SPDIF out<br />
* Due to the below known issue, Photo Screen Saver must be disabled for UI2<br />
<br />
== LMCE 810 ==<br />
<br />
This device is plug and play as a diskless MD with 1 small exception, it will be detected as amd64 and need to be changed in web admin.<br />
<br />
== Known Issues ==<br />
<br />
* Photo Screen Saver causes issues with the Intel graphics chipset - this causes the screen to not display properly. Resolution: disable PSS.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Custom_Display_Resolutions&diff=19536Custom Display Resolutions2009-06-30T00:39:43Z<p>Pnuts: /* Diskless Media Director */</p>
<hr />
<div>{| align="right"<br />
| __TOC__<br />
|}<br />
[[Category:Documentation]]<br />
[[Category:Tutorials]]<br />
If you have a display designed for use with a computer rather than as a regular TV, such as a plasma display, it is possible that the native resolution of the display is not one of the options presented by the [[AVWizard]]. In this case, with a small amount of tweaking it is possible to get the media director to drive the display at its native resolution, which will give you optimum picture quality.<br />
<br />
==Enable EDID==<br />
<br />
By default, LinuxMCE disables EDID - please see the [[EDID]] page for the details. However in this case you are probably better off re-enabling it. This should be done by editing <code>/usr/pluto/templates/xorg.conf.in</code>, which is the template from which the [[AVWizard]] automatically creates new Xorg configurations. You will find a line in this file like:<br />
<br />
Option "UseEDID" "false"<br />
<br />
Simply change <code>false</code> to <code>true</code> and save the file. Now we need to regenerate the Xorg config, but first we need to ensure that the right resolution is visible in the [[AVWizard]].<br />
<br />
==Adding new resolutions to the A/V Wizard==<br />
<br />
The resolutions visible in the wizard are set in the file <code>/usr/pluto/share/Resolutions.conf</code>. The resolution you need may well already be in there, but with visibility disabled. For instance, 1360x768 is already in there, and only requires the visibility flag to be toggled to make it appear in the wizard.<br />
<br />
If your required resolution is not in there, copy a block from one of the other resolutions and modify it accordingly.<br />
<br />
=== Resolutions.conf ===<br />
The Resolutions.conf file is parsed using the libconfuse library. libconfuse provides means of creating structured, yet simple, configuration files. This particular file is composed by entries like this:<br />
<br />
resolution<br />
{<br />
name = "640x480" #(1)<br />
width = 640 #(2)<br />
height = 480 #(2)<br />
aspect_ratio = "4:3" #(3)<br />
modeline #(4)<br />
{<br />
refresh = 60 #(4.1)<br />
builtin = true #(4.2)<br />
x11 = "" #(4.3)<br />
workaround #(4.4)<br />
{<br />
driver = {"nvidia"}<br />
x11 = "25.18 640 656 752 800 480 490 492 525"<br />
}<br />
}<br />
modeline<br />
{<br />
refresh = 75<br />
builtin = true<br />
}<br />
visible = true #(5)<br />
}<br />
<br />
==== (1) The "name" field ====<br />
This field is used as the name of the resolution when it is displayed by the A/V Wizard, and when retrieving ModeLines with <code>/usr/pluto/bin/X-GetModeline</code><br />
==== (2) The "width" and "height" fields ====<br />
These fields give the dimensions for the screen for the specified resolution. A resolution can have any name (even "WagaWaga" could be used, if meaningful to someone), and these values would then define the dimensions in pixels for that resolution.<br />
==== (3) The "aspect_ratio" field ====<br />
This field is for display purposes alone. It is displayed by the A/V Wizard next to the resolution name.<br />
==== (4) The "modeline" section ====<br />
This section is optional. It can be skipped. In that case, a modeline will be generated by xtiming.pl.<br />
<br />
You can have multiple modeline sections in a resolution block.<br />
<br />
* (4.1) The "refresh" selector<br />
If you include a modeline section, you must specify the "refresh" field. This field specifies to which refresh rate of the current resolution does the modeline apply.<br />
<br />
* (4.2) The "builtin" directive<br />
When set to "true", this says that the X server has a built-in modeline for this resolution and refresh rate combination and no modeline should be generated<br />
<br />
* (4.3) The "x11" field<br />
This field contains the modeline for this resolution and refresh rate combination, minus the modeline name, i.e. starting from the dot clock value.<br />
<br />
If the mode is built-in, the x11 directive is ignored. If the mode is not built-in, and x11 is empty, then xtiming.pl is used to generate a modeline.<br />
<br />
* (4.4) The "workaround" sub-section<br />
This section is optional. This section is used for cases when it is known that the general settings described in the section are buggy for certain display drivers.<br />
<br />
If you include this section, you need to specify the "driver" selector. The "driver" selector is a list of the following form: <code>{"driver1","driver2",...}</code><br />
<br />
This subsection can have the "x11" and "builtin" fields, with the same meaning and syntax as described above.<br />
<br />
==== (5) The "visible" directive ====<br />
This directive is used by A/V Wizard to decide if to display the resolution in the resolutions box or not.<br />
<br />
=== Caveat ===<br />
'''Furthermore''', unfortunately these resolutions are also hardcoded in <code>/usr/pluto/bin/AVWizard-Common.sh</code> - look for the line starting <code>Resolutions_HDTV</code> and add your custom resolution to the shell array. This is arguably a bug where the code does not gracefully handle resolutions which are listed in <code>/usr/pluto/share/Resolutions.conf</code> but not listed in <code>/usr/pluto/bin/AVWizard-Common.sh</code>.<br />
<br />
=== Orbiter size ===<br />
When you add a resolution, you may also want to add a Orbiter size to match it.<br />
<br />
The Orbiter sizes are kept in the '''Size''' table. This is a good SQL statement to add a size:<br />
INSERT INTO Size SET Description='<b>Size Name</b>', Width=<b>Width</b>, Height=<b>Height</b>, ScaleX=<b>ScaleX*</b>, ScaleY=<b>ScaleY*</b>, ScaleMenuBg='S', ScaleOtherGraphics='F';<br />
<br />
I don't know what ScaleMenuBg and ScaleOtherGraphics mean, but except for the Nokia770 size, all the other entries have them like that.<br />
<br />
==== ScaleX and ScaleY ====<br />
You can't set ScaleX and ScaleY just to any values. The end result depends greatly on these. If you get them wrong, the size of your Orbiter will be incorrect (and OrbiterGen will die if you set any of them to 0).<br />
<br />
Here's how to compute the right values:<br />
* For 4:3 resolutions<br />
ScaleX = int(Width / 2.84444444444)<br />
ScaleY = int(Height / 1.6)<br />
* For 16:9 resolutions<br />
ScaleY = int(Width / 2.13333333333)<br />
ScaleY = int(Height / 1.6)<br />
<br />
These formulas are using the value ratios determined from the existing sizes.<br />
<br />
'''Fix me''': Determine a general formula for general aspect ratios.<br />
<br />
==Run the A/V Wizard==<br />
Running the A/V Wizard will regenerate the correct Xorg configuration<br />
<br />
[[AVWizard Step by Step|Proceed through the wizard]], selecting the resolution which you have just made appear, and make sure the display is happy with the setting. If not, switch to the tty1 virtual console via Control-Alt-F1, log in, and check the most recently modified Xorg logfile written by the wizard's test (this is probably <code>/var/log/Xorg.1.log</code>) to find out why it didn't work.<br />
<br />
==Prevent LinuxMCE from changing the Xorg config==<br />
<br />
This is a bit of an ugly hack, and if the above is done correctly I'm not sure if it's even needed. Nevertheless, if you want to get really creative and write your own xorg.conf, this is the way to protect it from being overwritten:<br />
<br />
Edit <code>/usr/pluto/bin/Xconfigure.sh</code> and add the following lines immediately below the <code>#!/bin/bash</code>:<br />
<br />
echo "$0 neutered to preserve custom xorg.conf"<br />
exit 0<br />
<br />
<br />
==Diskless Media Director==<br />
<br />
Chroot into the MD and perform the steps mentioned above to add the custom resolution.<br />
<br />
To chroot into the MD, first make sure it is turned off<br />
<br />
From the web admin, determine the ID of the MD you wish to modify.<br />
<br />
cd /usr/pluto/diskless/<br />
chroot <mediadirector-id><br />
<br />
Then perform the above steps.<br />
<br />
*This worked for me, if someone could verify and remove this remark -Pnuts</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Custom_Display_Resolutions&diff=19535Custom Display Resolutions2009-06-30T00:39:28Z<p>Pnuts: </p>
<hr />
<div> {| align="right"<br />
| __TOC__<br />
|}<br />
[[Category:Documentation]]<br />
[[Category:Tutorials]]<br />
If you have a display designed for use with a computer rather than as a regular TV, such as a plasma display, it is possible that the native resolution of the display is not one of the options presented by the [[AVWizard]]. In this case, with a small amount of tweaking it is possible to get the media director to drive the display at its native resolution, which will give you optimum picture quality.<br />
<br />
==Enable EDID==<br />
<br />
By default, LinuxMCE disables EDID - please see the [[EDID]] page for the details. However in this case you are probably better off re-enabling it. This should be done by editing <code>/usr/pluto/templates/xorg.conf.in</code>, which is the template from which the [[AVWizard]] automatically creates new Xorg configurations. You will find a line in this file like:<br />
<br />
Option "UseEDID" "false"<br />
<br />
Simply change <code>false</code> to <code>true</code> and save the file. Now we need to regenerate the Xorg config, but first we need to ensure that the right resolution is visible in the [[AVWizard]].<br />
<br />
==Adding new resolutions to the A/V Wizard==<br />
<br />
The resolutions visible in the wizard are set in the file <code>/usr/pluto/share/Resolutions.conf</code>. The resolution you need may well already be in there, but with visibility disabled. For instance, 1360x768 is already in there, and only requires the visibility flag to be toggled to make it appear in the wizard.<br />
<br />
If your required resolution is not in there, copy a block from one of the other resolutions and modify it accordingly.<br />
<br />
=== Resolutions.conf ===<br />
The Resolutions.conf file is parsed using the libconfuse library. libconfuse provides means of creating structured, yet simple, configuration files. This particular file is composed by entries like this:<br />
<br />
resolution<br />
{<br />
name = "640x480" #(1)<br />
width = 640 #(2)<br />
height = 480 #(2)<br />
aspect_ratio = "4:3" #(3)<br />
modeline #(4)<br />
{<br />
refresh = 60 #(4.1)<br />
builtin = true #(4.2)<br />
x11 = "" #(4.3)<br />
workaround #(4.4)<br />
{<br />
driver = {"nvidia"}<br />
x11 = "25.18 640 656 752 800 480 490 492 525"<br />
}<br />
}<br />
modeline<br />
{<br />
refresh = 75<br />
builtin = true<br />
}<br />
visible = true #(5)<br />
}<br />
<br />
==== (1) The "name" field ====<br />
This field is used as the name of the resolution when it is displayed by the A/V Wizard, and when retrieving ModeLines with <code>/usr/pluto/bin/X-GetModeline</code><br />
==== (2) The "width" and "height" fields ====<br />
These fields give the dimensions for the screen for the specified resolution. A resolution can have any name (even "WagaWaga" could be used, if meaningful to someone), and these values would then define the dimensions in pixels for that resolution.<br />
==== (3) The "aspect_ratio" field ====<br />
This field is for display purposes alone. It is displayed by the A/V Wizard next to the resolution name.<br />
==== (4) The "modeline" section ====<br />
This section is optional. It can be skipped. In that case, a modeline will be generated by xtiming.pl.<br />
<br />
You can have multiple modeline sections in a resolution block.<br />
<br />
* (4.1) The "refresh" selector<br />
If you include a modeline section, you must specify the "refresh" field. This field specifies to which refresh rate of the current resolution does the modeline apply.<br />
<br />
* (4.2) The "builtin" directive<br />
When set to "true", this says that the X server has a built-in modeline for this resolution and refresh rate combination and no modeline should be generated<br />
<br />
* (4.3) The "x11" field<br />
This field contains the modeline for this resolution and refresh rate combination, minus the modeline name, i.e. starting from the dot clock value.<br />
<br />
If the mode is built-in, the x11 directive is ignored. If the mode is not built-in, and x11 is empty, then xtiming.pl is used to generate a modeline.<br />
<br />
* (4.4) The "workaround" sub-section<br />
This section is optional. This section is used for cases when it is known that the general settings described in the section are buggy for certain display drivers.<br />
<br />
If you include this section, you need to specify the "driver" selector. The "driver" selector is a list of the following form: <code>{"driver1","driver2",...}</code><br />
<br />
This subsection can have the "x11" and "builtin" fields, with the same meaning and syntax as described above.<br />
<br />
==== (5) The "visible" directive ====<br />
This directive is used by A/V Wizard to decide if to display the resolution in the resolutions box or not.<br />
<br />
=== Caveat ===<br />
'''Furthermore''', unfortunately these resolutions are also hardcoded in <code>/usr/pluto/bin/AVWizard-Common.sh</code> - look for the line starting <code>Resolutions_HDTV</code> and add your custom resolution to the shell array. This is arguably a bug where the code does not gracefully handle resolutions which are listed in <code>/usr/pluto/share/Resolutions.conf</code> but not listed in <code>/usr/pluto/bin/AVWizard-Common.sh</code>.<br />
<br />
=== Orbiter size ===<br />
When you add a resolution, you may also want to add a Orbiter size to match it.<br />
<br />
The Orbiter sizes are kept in the '''Size''' table. This is a good SQL statement to add a size:<br />
INSERT INTO Size SET Description='<b>Size Name</b>', Width=<b>Width</b>, Height=<b>Height</b>, ScaleX=<b>ScaleX*</b>, ScaleY=<b>ScaleY*</b>, ScaleMenuBg='S', ScaleOtherGraphics='F';<br />
<br />
I don't know what ScaleMenuBg and ScaleOtherGraphics mean, but except for the Nokia770 size, all the other entries have them like that.<br />
<br />
==== ScaleX and ScaleY ====<br />
You can't set ScaleX and ScaleY just to any values. The end result depends greatly on these. If you get them wrong, the size of your Orbiter will be incorrect (and OrbiterGen will die if you set any of them to 0).<br />
<br />
Here's how to compute the right values:<br />
* For 4:3 resolutions<br />
ScaleX = int(Width / 2.84444444444)<br />
ScaleY = int(Height / 1.6)<br />
* For 16:9 resolutions<br />
ScaleY = int(Width / 2.13333333333)<br />
ScaleY = int(Height / 1.6)<br />
<br />
These formulas are using the value ratios determined from the existing sizes.<br />
<br />
'''Fix me''': Determine a general formula for general aspect ratios.<br />
<br />
==Run the A/V Wizard==<br />
Running the A/V Wizard will regenerate the correct Xorg configuration<br />
<br />
[[AVWizard Step by Step|Proceed through the wizard]], selecting the resolution which you have just made appear, and make sure the display is happy with the setting. If not, switch to the tty1 virtual console via Control-Alt-F1, log in, and check the most recently modified Xorg logfile written by the wizard's test (this is probably <code>/var/log/Xorg.1.log</code>) to find out why it didn't work.<br />
<br />
==Prevent LinuxMCE from changing the Xorg config==<br />
<br />
This is a bit of an ugly hack, and if the above is done correctly I'm not sure if it's even needed. Nevertheless, if you want to get really creative and write your own xorg.conf, this is the way to protect it from being overwritten:<br />
<br />
Edit <code>/usr/pluto/bin/Xconfigure.sh</code> and add the following lines immediately below the <code>#!/bin/bash</code>:<br />
<br />
echo "$0 neutered to preserve custom xorg.conf"<br />
exit 0<br />
<br />
<br />
==Diskless Media Director==<br />
<br />
Chroot into the MD and perform the steps mentioned above to add the custom resolution.<br />
<br />
<br />
To chroot into the MD, first make sure it is turned off<br />
<br />
From the web admin, determine the ID of the MD you wish to modify.<br />
<br />
cd /usr/pluto/diskless/<br />
chroot <mediadirector-id><br />
<br />
Then perform the above steps.<br />
<br />
*This worked for me, if someone could verify and remove this remark -Pnuts</div>Pnutshttp://wiki.linuxmce.org/index.php?title=MSI_Wind_Nettop&diff=19534MSI Wind Nettop2009-06-30T00:04:03Z<p>Pnuts: /* Known Issues */</p>
<hr />
<div>[[Category: Hardware]] <br />
[[Category: Media Directors]]<br />
[[Category: Barebones]]<br />
[[Category: Nettops]]<br />
<br />
The MSI Wind Nettop is a very small, ultra low power consumption Intel Atom based PC that can be used as an MD. This is a low end, very low cost barebones PC that already includes a CPU. So for MD usage, you just need to add a stick of RAM and you're done!<br />
<br />
It is available from NewEgg (they do not ship internationally) for US$149.99, [http://www.newegg.com/Product/Product.aspx?Item=N82E16856167037 here].<br />
<br />
[[Image:MSI_Wind_PC.jpg|thumb|right|300px|MSI Wind Nettop]]<br />
<br />
This is almost Identical to the [http://wiki.linuxmce.org/index.php/MSI_Wind_PC MSI Wind PC] except that it has a dual core cpu.<br />
<br />
== System Specs ==<br />
<br />
* Small foot print - 300x260x65mm<br />
* Intel 1.6GHz Atom 330 (dual core) on board<br />
* 7.1 Surround sound - analogue minijacks<br />
* Almost noiseless<br />
* Low energy consumption - designed to operate at full speed using only 35W<br />
<br />
== Disadvantages ==<br />
<br />
* Video is analogue - no DVI or HDMI<br />
* Audio is analogue - no SPDIF out<br />
<br />
== LMCE 810 ==<br />
<br />
This device is plug and play as a diskless MD with 1 small exception, it will be detected as amd64 and need to be changed in web admin.<br />
<br />
== Known Issues ==<br />
<br />
* Photo Screen Saver causes issues with the Intel graphics chipset - this causes the screen to not display properly. Resolution: disable PSS.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=MSI_Wind_Nettop&diff=19531MSI Wind Nettop2009-06-29T23:11:38Z<p>Pnuts: /* System Specs */</p>
<hr />
<div>[[Category: Hardware]] <br />
[[Category: Media Directors]]<br />
[[Category: Barebones]]<br />
[[Category: Nettops]]<br />
<br />
The MSI Wind Nettop is a very small, ultra low power consumption Intel Atom based PC that can be used as an MD. This is a low end, very low cost barebones PC that already includes a CPU. So for MD usage, you just need to add a stick of RAM and you're done!<br />
<br />
It is available from NewEgg (they do not ship internationally) for US$149.99, [http://www.newegg.com/Product/Product.aspx?Item=N82E16856167037 here].<br />
<br />
[[Image:MSI_Wind_PC.jpg|thumb|right|300px|MSI Wind Nettop]]<br />
<br />
This is almost Identical to the [http://wiki.linuxmce.org/index.php/MSI_Wind_PC MSI Wind PC] except that it has a dual core cpu.<br />
<br />
== System Specs ==<br />
<br />
* Small foot print - 300x260x65mm<br />
* Intel 1.6GHz Atom 330 (dual core) on board<br />
* 7.1 Surround sound - analogue minijacks<br />
* Almost noiseless<br />
* Low energy consumption - designed to operate at full speed using only 35W<br />
<br />
== Disadvantages ==<br />
<br />
* Video is analogue - no DVI or HDMI<br />
* Audio is analogue - no SPDIF out<br />
<br />
== LMCE 810 ==<br />
<br />
This device is plug and play as a diskless MD with 1 small exception, it will be detected as amd64 and need to be changed in web admin.<br />
<br />
== Known Issues ==<br />
<br />
* Photo Screen Saver sometimes causes issues with the Intel graphics chipset - this causes the unit to lock up. Resolution: disable PSS. It is possible in the next version (0810) of LMCE the driver updates will fix this.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=MSI_Wind_Nettop&diff=19530MSI Wind Nettop2009-06-29T23:09:30Z<p>Pnuts: New page: Category: Hardware Category: Media Directors Category: Barebones Category: Nettops The MSI Wind Nettop is a very small, ultra low power consumption Intel Atom based PC th...</p>
<hr />
<div>[[Category: Hardware]] <br />
[[Category: Media Directors]]<br />
[[Category: Barebones]]<br />
[[Category: Nettops]]<br />
<br />
The MSI Wind Nettop is a very small, ultra low power consumption Intel Atom based PC that can be used as an MD. This is a low end, very low cost barebones PC that already includes a CPU. So for MD usage, you just need to add a stick of RAM and you're done!<br />
<br />
It is available from NewEgg (they do not ship internationally) for US$149.99, [http://www.newegg.com/Product/Product.aspx?Item=N82E16856167037 here].<br />
<br />
[[Image:MSI_Wind_PC.jpg|thumb|right|300px|MSI Wind Nettop]]<br />
<br />
This is almost Identical to the [http://wiki.linuxmce.org/index.php/MSI_Wind_PC MSI Wind PC] except that it has a dual core cpu.<br />
<br />
== System Specs ==<br />
<br />
* Small foot print - 300x260x65mm<br />
* Intel 1.6GHz Atom 330 (dual core) on board<br />
* 7.1 Surround sound - analogue minijacks<br />
* Almost noiseless<br />
* Low energy consumption - designed to operate at full speed with only 35W<br />
<br />
== Disadvantages ==<br />
<br />
* Video is analogue - no DVI or HDMI<br />
* Audio is analogue - no SPDIF out<br />
<br />
== LMCE 810 ==<br />
<br />
This device is plug and play as a diskless MD with 1 small exception, it will be detected as amd64 and need to be changed in web admin.<br />
<br />
== Known Issues ==<br />
<br />
* Photo Screen Saver sometimes causes issues with the Intel graphics chipset - this causes the unit to lock up. Resolution: disable PSS. It is possible in the next version (0810) of LMCE the driver updates will fix this.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18680Z-Wave Getting Started2009-04-27T14:32:34Z<p>Pnuts: /* LMCE Interface */</p>
<hr />
<div>[[Category: ZWave]]<br />
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, both of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
Switches are a simple switch that is either On or Off<br />
<br />
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this.<br />
<br />
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a cieling fan with lights operating on a single switch and switches that control an outlet receptacle.<br />
<br />
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.<br />
<br />
==Receptacles==<br />
Receptacles are the outlets which you plug your stuff into.<br />
<br />
Generally there is not a need to replace these but it can be useful for these needs:<br />
<br />
* Turn the Receptacle on or of at specific time to conserver power<br />
* If you do not have a permanent light fixture and a lamp is attached to this Receptacle.<br />
<br />
If you currently have a switch controlling a Receptacle, it is not advised to replace the Receptacle with one of these unless you are eliminating the switch. Otherwise the switch will need to remain in the On position for the receptacle to operate correctly.<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18679Z-Wave Getting Started2009-04-27T14:25:34Z<p>Pnuts: /* Receptacles */</p>
<hr />
<div>[[Category: ZWave]]<br />
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
Switches are a simple switch that is either On or Off<br />
<br />
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this.<br />
<br />
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a cieling fan with lights operating on a single switch and switches that control an outlet receptacle.<br />
<br />
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.<br />
<br />
==Receptacles==<br />
Receptacles are the outlets which you plug your stuff into.<br />
<br />
Generally there is not a need to replace these but it can be useful for these needs:<br />
<br />
* Turn the Receptacle on or of at specific time to conserver power<br />
* If you do not have a permanent light fixture and a lamp is attached to this Receptacle.<br />
<br />
If you currently have a switch controlling a Receptacle, it is not advised to replace the Receptacle with one of these unless you are eliminating the switch. Otherwise the switch will need to remain in the On position for the receptacle to operate correctly.<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18430Z-Wave Getting Started2009-04-13T16:28:06Z<p>Pnuts: </p>
<hr />
<div>[[Category: ZWave]]<br />
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
Switches are a simple switch that is either On or Off<br />
<br />
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this.<br />
<br />
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a cieling fan with lights operating on a single switch and switches that control an outlet receptacle.<br />
<br />
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.<br />
<br />
==Receptacles==<br />
Receptacles are the outlets which you plug your stuff into.<br />
<br />
Generally there is not a need to replace these but it can be useful for these needs:<br />
<br />
* Turn the Receptacle on or of at specific time to conserver power<br />
* If you do not have a permanent light fixture and a lamp is attached to this Receptacle.<br />
<br />
If you currently have a switch controlling a Receptacle, it is not advised to replace the Receptacle with one of these unless you are eliminating the switch. Otherwise it will need to remain in the On position for the switch to operate correctly.<br />
<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18427Z-Wave Getting Started2009-04-13T15:36:31Z<p>Pnuts: </p>
<hr />
<div>[[Category: ZWave]]<br />
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
Switches are a simple switch that is either On or Off<br />
<br />
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this.<br />
<br />
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a cieling fan with lights operating on a single switch and switches that control an outlet reciptacle.<br />
<br />
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Wayne_Dalton_HA18WD&diff=18426Wayne Dalton HA18WD2009-04-13T15:36:16Z<p>Pnuts: </p>
<hr />
<div>[[category:Hardware]]<br />
[[Category: ZWave]]<br />
<br />
The Wayne Dalton HA18WD switch is a Z-Wave device that is capable of On or Off switching. It can be installed as a Single Pole or 3-Way Switch.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18425Z-Wave Getting Started2009-04-13T15:35:25Z<p>Pnuts: </p>
<hr />
<div>[[category:Z-Wave]]<br />
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
Switches are a simple switch that is either On or Off<br />
<br />
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this.<br />
<br />
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a cieling fan with lights operating on a single switch and switches that control an outlet reciptacle.<br />
<br />
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18424Z-Wave Getting Started2009-04-13T15:32:35Z<p>Pnuts: /* Switches */</p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
Switches are a simple switch that is either On or Off<br />
<br />
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this.<br />
<br />
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a cieling fan with lights operating on a single switch and switches that control an outlet reciptacle.<br />
<br />
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Wayne_Dalton_HA18WD&diff=18423Wayne Dalton HA18WD2009-04-13T15:26:53Z<p>Pnuts: New page: category:Hardware category:Z-Wave The Wayne Dalton HA18WD switch is a Z-Wave device that is capable of On or Off switching. It can be installed as a Single Pole or 3-Way Switch.</p>
<hr />
<div>[[category:Hardware]]<br />
[[category:Z-Wave]]<br />
<br />
The Wayne Dalton HA18WD switch is a Z-Wave device that is capable of On or Off switching. It can be installed as a Single Pole or 3-Way Switch.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Intermatic_HA06C&diff=18422Intermatic HA06C2009-04-13T15:21:44Z<p>Pnuts: </p>
<hr />
<div>[[Category: Hardware]]<br />
[[Category: ZWave]]<br />
Intermatic HA06C is a Z-Wave Dimmer switch for a 300W load.<br />
<br />
It is for single pole installations only.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18421Z-Wave Getting Started2009-04-13T15:18:07Z<p>Pnuts: /* Dimmers */</p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.<br />
<br />
The [[Intermatic_HA06C|Intermatic HA06C]] is an example of this.<br />
<br />
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.<br />
<br />
Dimmer switches should not be used for replacing switches which control a cieling fan, fluorescent bulbs or an outlet receptacle.<br />
<br />
==Switches==<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Intermatic_HA06C&diff=18420Intermatic HA06C2009-04-13T15:11:51Z<p>Pnuts: New page: Intermatic HA06C is a Z-Wave Dimmer switch for a 300W load. It is for single pole installations only.</p>
<hr />
<div>Intermatic HA06C is a Z-Wave Dimmer switch for a 300W load.<br />
<br />
It is for single pole installations only.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18419Z-Wave Getting Started2009-04-13T15:09:58Z<p>Pnuts: /* Dimmers */</p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with Fluorescent or compact fluorescent bulbs.<br />
<br />
==Switches==<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18418Z-Wave Getting Started2009-04-13T15:00:28Z<p>Pnuts: /* Devices */</p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.<br />
<br />
==Dimmers==<br />
<br />
==Switches==<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18417Z-Wave Getting Started2009-04-13T14:56:26Z<p>Pnuts: /* Devices */</p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.<br />
<br />
==Dimmers==<br />
<br />
==Switches==<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18416Z-Wave Getting Started2009-04-13T14:46:50Z<p>Pnuts: </p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, but of which us a USB stick that plugs into the LMCE Core.<br />
<br />
Here are the Choices:<br />
<br />
==USB Stick without Controller==<br />
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control, however, you will need a seperate Z-Wave master controller(Required). A master controller can be used in addition to LMCE to control Z-Wave devices.<br />
<br />
Some examples of these sticks are:<br><br />
[[Tricklestar_300ZW-US-W|US Tricklestar]]<br><br />
[[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br><br />
[[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br><br />
[[Intermatic_HA23C|Intermatic HA23C]]<br><br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
==USB Stick with Controller==<br />
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.<br />
<br />
Some examples of these sticks are:<br><br />
[[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
<br />
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation.<br />
<br />
==Dimmers==<br />
<br />
==Switches==<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Abrook_IP502&diff=18394Abrook IP5022009-04-12T04:08:39Z<p>Pnuts: </p>
<hr />
<div>= Status =<br />
The Abrook IP502 IP camera is not yet known to work with LMCE. I'll update this page once I receive mine in the mail<br />
<br />
= Features and Specifications =<br />
* Ethernet 10/100 (RJ45 Connection)<br />
* Resolution: 640x480, 320x240, 160x120<br />
* Frame rate: 30fps<br />
* Infrared LEDs: 6 LED's automatic operate in dark environment<br />
* Compress format : M-JPEG<br />
* Movement: 120° up and down, 180° left to right<br />
* Display: LCD displays the IP address /Network mask/gateway IP etc.<br />
* Storage: CF Slot for local storage<br />
* Input/Output ports: 2 relay inputs and 1 relay output<br />
* Video Connections: 10 connections at once<br />
* Integrated Web Server<br />
* Security: 3 levels of access restrictions<br />
* CPU: 32bit Arm @ 66MHz -- SDRAM 16MB -- Flash 4MB<br />
* Camera OS is running on Linux Kernel 2.6, Web Server is BOA</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18389Z-Wave Getting Started2009-04-11T05:02:37Z<p>Pnuts: </p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. Here are a few of the options.<br />
==Mi Casa Verde USB + Inclusion Controller==<br />
The Mi Casa Verde USB + Inclusion Controller is a good starter choice, especially if you do not plan on buying a master z-wave controller as it is built in.<br />
<br />
Please see the individual page for this item for more information: [[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
==Tricklestar 300ZW==<br />
The Tricklestar_300ZW will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Tricklestar_300ZW-US-W|US Tricklestar]] or the [[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br />
<br />
==Seluxit viaSENS Homecontroller==<br />
The [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]] will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br />
<br />
==HA23 USB Stick==<br />
The HA23 USB Stick will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Intermatic_HA23C|Intermatic HA23C]]<br />
<br />
=Devices=<br />
These are some of the devices that you will use around the house with your z-wave installation.<br />
<br />
==Dimmers==<br />
<br />
==Switches==<br />
<br />
==Receptacles==<br />
<br />
==Door Locks==<br />
<br />
==Heating\Cooling Control==<br />
<br />
=FAQ=<br />
Some common questions regarding what devices to use and where<br />
==Lighting==</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18388Z-Wave Getting Started2009-04-10T22:48:35Z<p>Pnuts: /* LMCE Interface */</p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. Here are a few of the options.<br />
==Mi Casa Verde USB + Inclusion Controller==<br />
The Mi Casa Verde USB + Inclusion Controller is a good starter choice, especially if you do not plan on buying a master z-wave controller as it is built in.<br />
<br />
Please see the individual page for this item for more information: [[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
==Tricklestar 300ZW==<br />
The Tricklestar_300ZW will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Tricklestar_300ZW-US-W|US Tricklestar]] or the [[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br />
<br />
==Seluxit viaSENS Homecontroller==<br />
The [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]] will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]<br />
<br />
==HA23 USB Stick==<br />
The HA23 USB Stick will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Intermatic_HA23C|Intermatic HA23C]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18387Z-Wave Getting Started2009-04-10T22:44:38Z<p>Pnuts: </p>
<hr />
<div>So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. Here are a few of the options.<br />
==Mi Casa Verde USB + Inclusion Controller==<br />
The Mi Casa Verde USB + Inclusion Controller is a good starter choice, especially if you do not plan on buying a master z-wave controller as it is built in.<br />
<br />
Please see the individual page for this item for more information: [[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
==Tricklestar 300ZW==<br />
The Tricklestar_300ZW will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Tricklestar_300ZW-US-W|US Tricklestar]] or the [[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br />
<br />
==Seluxit viaSENS Homecontroller==<br />
The [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]] will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Z-Wave_Getting_Started&diff=18386Z-Wave Getting Started2009-04-10T22:43:57Z<p>Pnuts: New page: =Introduction= So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with an...</p>
<hr />
<div>=Introduction=<br />
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.<br />
<br />
=LMCE Interface=<br />
You are going to need some kind of method for LMCE to control your Z-Wave installation. Here are a few of the options.<br />
==Mi Casa Verde USB + Inclusion Controller==<br />
The Mi Casa Verde USB + Inclusion Controller is a good starter choice, especially if you do not plan on buying a master z-wave controller as it is built in.<br />
<br />
Please see the individual page for this item for more information: [[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]]<br />
==Tricklestar 300ZW==<br />
The Tricklestar_300ZW will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Tricklestar_300ZW-US-W|US Tricklestar]] or the [[Tricklestar_300ZW-EU-W|EU Tricklestar]]<br />
<br />
==Seluxit viaSENS Homecontroller==<br />
The [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]] will allow LMCE to function the same as with the Mi Casa Verde USB Stick however you will also need a master controller for your Z-Wave setup.<br />
<br />
Please see the individual page for this item for more information: [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Abrook_IP502&diff=18365Abrook IP5022009-04-09T19:20:27Z<p>Pnuts: New page: = Status = The Abrook IP502 IP camera is not yet known to work with LMCE. I'll update this page once I receive mine in the mail = Features and Specifications = * Ethernet 10/100 (RJ45 Con...</p>
<hr />
<div>= Status =<br />
The Abrook IP502 IP camera is not yet known to work with LMCE. I'll update this page once I receive mine in the mail<br />
<br />
= Features and Specifications =<br />
* Ethernet 10/100 (RJ45 Connection)<br />
* Resolution: 640x480, 320x240, 160x120<br />
* Frame rate: 30fps<br />
* Infrared LED Support 6 infrared LED, automatic operate in dark environment<br />
* Compress format : M-JPEG<br />
* Movement: 120° up and down, 180° left to right<br />
* Display: LCD displays the IP address /Network mask/gateway IP etc.<br />
* Storage: CF Slot for local storage<br />
* Input/Output ports: Connect 2 switches sensor outside and 1 relay output to alarms<br />
* Video Connections: 10 connections at once<br />
* Integrated Web Server<br />
* Security: 3 levels of access restrictions</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=18359User:Pnuts2009-04-08T20:40:10Z<p>Pnuts: </p>
<hr />
<div>[[category:User Setups]]<br />
<br />
= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
Coming Soon?<br />
=== Specs ===<br />
Coming Soon?<br />
<br />
== Media Director 1 ==<br />
Coming Soon?<br />
=== Specs ===<br />
Coming Soon?<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
This is how I plan to have the house setup for the initial AV rollout. Currently it is far from this as there is no dedicated Core (Hybrid right now)and it is located in the Theater Room on its own mini network while I tackle a few quarks to get this moving.<br />
<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=File:Pnuts_Network_Layout.JPG&diff=18358File:Pnuts Network Layout.JPG2009-04-08T20:34:17Z<p>Pnuts: uploaded a new version of "Image:Pnuts Network Layout.JPG"</p>
<hr />
<div></div>Pnutshttp://wiki.linuxmce.org/index.php?title=Hardware_compatibility_list&diff=18111Hardware compatibility list2009-03-25T04:12:30Z<p>Pnuts: /* Cameras */</p>
<hr />
<div>= Hardware Compatibility List =<br />
<br />
== Climate ==<br />
=== Thermostats ===<br />
<br />
== Core/Media Directors ==<br />
=== Motherboards ===<br />
=== Optical Drives ===<br />
==== Blu-Ray Drives ====<br />
==== CD/DVD Drives ====<br />
=== Sound Cards ===<br />
=== Storage Devices ===<br />
=== Video Cards ===<br />
NVidia GForce 7600<br />
<br />
== Lighting ==<br />
=== Interfaces ===<br />
[[CM11A]]<br />
=== Switches ===<br />
[[X10]]<br />
<br />
[[Z-Wave]]<br />
<br />
== Media ==<br />
=== Audio ===<br />
=== TV's ===<br />
=== Video ===<br />
[[Hauppauge WinTV-PVR-150 MCE | Hauppauge WinTV PVR-150 MCE]]<br />
<br />
== Orbiters ==<br />
<br />
== Telecommunications ==<br />
=== Phones ===<br />
[[Cisco 7970]]<br />
=== PSTN ===<br />
[[Sipura/Linksys spa3000 pstn interface | Sipura 3000]]<br />
<br />
X100P (Wiki Coming Soon!)<br />
=== VOIP ===<br />
<br />
== Security ==<br />
=== Cameras ===<br />
[[D-Link DCS-920]]<br />
<br />
[[D-Link DCS-5300G]]<br />
<br />
[[Linksys WVC54GCA]]<br />
<br />
=== Interfaces ===<br />
[[GlobalCache GC-100 | GC-100]]<br />
=== Panels ===<br />
[[Apex Destiny 6100]]<br />
<br />
[[Caddx NX-8E]]<br />
=== Sensors ===</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Linksys_WVC54GCA&diff=18110Linksys WVC54GCA2009-03-25T04:09:21Z<p>Pnuts: </p>
<hr />
<div>[[Category: Hardware]]<br />
[[Category: Cameras]]<br />
[[Category: LinuxMCE_Devices]]<br />
<br />
= Status =<br />
The Linksys WVC54GCA IP camera works for video, but zoom is not yet implemented.<br />
<br />
= Features and Specifications =<br />
* Ethernet<br />
* Wireless b/g<br />
* Security: WEP-64, WEP-128, WPA, WPA2<br />
* Resolution: 640 x 480, 320 x 240, 160 x 128<br />
* Integrated web-server.<br />
<br />
=IP Cameras and Motion Wrapper=<br />
<br />
IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.<br />
<br />
==To add Motion Wrapper and IP Cameras==<br />
<br />
* Open your [[LinuxMCE Admin Website|webadmin]] control panel and on the left pane at the bottom click on "Show Device Tree".<br />
<br />
* In the left pane Click on "core/hybrid".<br />
<br />
* On the right pane near the top, click on "Create Child Device", then leave everything blank and click "Pick Device Template" button.<br />
<br />
* Click the pull down box under "Device Template" and find the template labeled "Motion Wrapper", select this item and click "Pick Device Template"<br />
<br />
* Now on the right pane, click "Create Child Device" again. Enter your IP Cameras IP address and MAC address here, then click "Pick Device Template"<br />
<br />
* Click the pull down box under "Device Template" and use "Generic Motion IP Camera", then click "Pick Device Template"<br />
<br />
* Now on the right window pane, under Device Info fill in your camera's MAC address, it is located on a sticket on the back of the camera.<br />
<br />
* Still on the right window pane, scroll down to "Device Data" and fill in the following<br />
'''PATH:''' /img/snapshot.cgi<br><br />
'''TCP PORT:''' 80<br><br />
'''USERNAME:''' <username you assigned><br><br />
'''PASSWORD:''' <password you assigned><br />
<br />
* Now click save at the bottom, reload your router, and on your mce interface go to "Security" -> "Generic Analog Camera" to see if it's working.</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Linksys_WVC54GCA&diff=18109Linksys WVC54GCA2009-03-25T04:08:51Z<p>Pnuts: </p>
<hr />
<div>[[Category: Hardware]]<br />
[[Category: Cameras]]<br />
[[Category: LinuxMCE_Devices]]<br />
<br />
= Status =<br />
The Linksys WVC54GCA IP camera works for video, but zoom is not yet implemented.<br />
<br />
= Features and Specifications =<br />
* Ethernet<br />
* Wireless b/g<br />
* Security: WEP-64, WEP-128, WPA, WPA2<br />
* Resolution: 640 x 480, 320 x 240, 160 x 128<br />
* Integrated web-server.<br />
<br />
=IP Cameras and Motion Wrapper=<br />
<br />
IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.<br />
<br />
==To add Motion Wrapper and IP Cameras==<br />
<br />
* Open your [[LinuxMCE Admin Website|webadmin]] control panel and on the left pane at the bottom click on "Show Device Tree".<br />
<br />
* In the left pane Click on "core/hybrid".<br />
<br />
* On the right pane near the top, click on "Create Child Device", then leave everything blank and click "Pick Device Template" button.<br />
<br />
* Click the pull down box under "Device Template" and find the template labeled "Motion Wrapper", select this item and click "Pick Device Template"<br />
<br />
* Now on the right pane, click "Create Child Device" again. Enter your IP Cameras IP address and MAC address here, then click "Pick Device Template"<br />
<br />
* Click the pull down box under "Device Template" and use "Generic Motion IP Camera", then click "Pick Device Template"<br />
<br />
* Now on the right window pane, under Device Info fill in your camera's MAC address, it is located on a sticket on the back of the camera.<br />
<br />
* Still on the right window pane, scroll down to "Device Data" and fill in the following<br />
'''PATH:''' /img/snapshot.cgi<br><br />
'''TCP PORT:''' 80<br><br />
'''USERNAME:''' <username you assigned><br><br />
'''PASSWORD:''' <password you assigned><br />
<br />
* Now click save at the bottom, reload your router, and on your mce interface go to "Security" -> "Generic Analog Camera" to see if it's working.<br />
<br />
<br />
For more info, see:<br />
http://forum.linuxmce.org/index.php?topic=7350.0<br />
http://www.linksysbycisco.com/US/en/products/WVC54GCA</div>Pnutshttp://wiki.linuxmce.org/index.php?title=Linksys_WVC54GCA&diff=18108Linksys WVC54GCA2009-03-25T04:08:05Z<p>Pnuts: </p>
<hr />
<div>[[Category: Hardware]]<br />
[[Category: Cameras]]<br />
[[Category: LinuxMCE_Devices]]<br />
<br />
= Status =<br />
The Linksys WVC54GCA IP camera works in 710.<br />
<br />
= Features and Specifications =<br />
* Ethernet<br />
* Wireless b/g<br />
* Security: WEP-64, WEP-128, WPA, WPA2<br />
* Resolution: 640 x 480, 320 x 240, 160 x 128<br />
* Integrated web-server.<br />
<br />
=IP Cameras and Motion Wrapper=<br />
<br />
IP cameras can be used under the Motion Wrapper to enable it to detect motion and alert based on that function.<br />
<br />
==To add Motion Wrapper and IP Cameras==<br />
<br />
* Open your [[LinuxMCE Admin Website|webadmin]] control panel and on the left pane at the bottom click on "Show Device Tree".<br />
<br />
* In the left pane Click on "core/hybrid".<br />
<br />
* On the right pane near the top, click on "Create Child Device", then leave everything blank and click "Pick Device Template" button.<br />
<br />
* Click the pull down box under "Device Template" and find the template labeled "Motion Wrapper", select this item and click "Pick Device Template"<br />
<br />
* Now on the right pane, click "Create Child Device" again. Enter your IP Cameras IP address and MAC address here, then click "Pick Device Template"<br />
<br />
* Click the pull down box under "Device Template" and use "Generic Motion IP Camera", then click "Pick Device Template"<br />
<br />
* Now on the right window pane, under Device Info fill in your camera's MAC address, it is located on a sticket on the back of the camera.<br />
<br />
* Still on the right window pane, scroll down to "Device Data" and fill in the following<br />
'''PATH:''' /img/snapshot.cgi<br><br />
'''TCP PORT:''' 80<br><br />
'''USERNAME:''' <username you assigned><br><br />
'''PASSWORD:''' <password you assigned><br />
<br />
* Now click save at the bottom, reload your router, and on your mce interface go to "Security" -> "Generic Analog Camera" to see if it's working.<br />
<br />
<br />
For more info, see:<br />
http://forum.linuxmce.org/index.php?topic=7350.0<br />
http://www.linksysbycisco.com/US/en/products/WVC54GCA</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17970User:Pnuts2009-03-14T23:43:19Z<p>Pnuts: /* The Core */</p>
<hr />
<div>[[category:User Setups]]<br />
<br />
= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Custom PC I built many many years ago<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Pending Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Capture Card ====<br />
The ATI All-In-Wonder 2006 Edition Radeon 9600 has a built in capture card. I am unsure if this works or not, or what I will have to do in order to get it to work. I will post more on this once I have the MD up and running.<br />
<br />
== Windows MCE \ Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 500gb drive<br><br />
Sata2: Seagate Barracuda 500gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD (Wife needs to convert to LMCE to do this)<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
While Windows see's the onboard raid controller and is treating the 2x500gb drives as a raid array, out of the box, Linux see's the 2 drives independantly. I found out this is because the onboard raid controller uses a "Fake Raid". More information about this here: https://help.ubuntu.com/community/FakeRaidHowto I will need to resolve this before i attempt to boot the system so I do not put the data on these drises at risk.<br />
==== Pxe Boot ====<br />
The Core is currently not providing the correct network driver when attempting to do a Pxe Boot so this machine is currently unable to boot as a MD.<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
My wife is not yet ready t let me take the full plunge, So I have a hybrid network going...<br />
<br />
If you look at the image, ill explain what is happening a little better. The Wireless router after modem is handing out DHCP address to the internal network and wireless devices, The LMCE Core external network addapter included.<br />
<br />
The LMCE Core's internal adapter then goes back into the same switch but because this is a manged switch, the port it is connected to is configured as its own virtual LAN. The current Windows Media Center and a 2nd wireless access point sit on this Virtual LAN. This enables the LMCE Core to use DHCP to its clients they way it is intended but also seperates my main internal network.<br />
<br />
My next step is to move the Theater room onto the VLAN once i have the Living Room on the LMCE system and the wife converted.<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17937User:Pnuts2009-03-09T21:37:08Z<p>Pnuts: </p>
<hr />
<div>[[category:User Setups]]<br />
<br />
= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Pending Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Capture Card ====<br />
The ATI All-In-Wonder 2006 Edition Radeon 9600 has a built in capture card. I am unsure if this works or not, or what I will have to do in order to get it to work. I will post more on this once I have the MD up and running.<br />
<br />
== Windows MCE \ Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 500gb drive<br><br />
Sata2: Seagate Barracuda 500gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD (Wife needs to convert to LMCE to do this)<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
While Windows see's the onboard raid controller and is treating the 2x500gb drives as a raid array, out of the box, Linux see's the 2 drives independantly. I found out this is because the onboard raid controller uses a "Fake Raid". More information about this here: https://help.ubuntu.com/community/FakeRaidHowto I will need to resolve this before i attempt to boot the system so I do not put the data on these drises at risk.<br />
==== Pxe Boot ====<br />
The Core is currently not providing the correct network driver when attempting to do a Pxe Boot so this machine is currently unable to boot as a MD.<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
My wife is not yet ready t let me take the full plunge, So I have a hybrid network going...<br />
<br />
If you look at the image, ill explain what is happening a little better. The Wireless router after modem is handing out DHCP address to the internal network and wireless devices, The LMCE Core external network addapter included.<br />
<br />
The LMCE Core's internal adapter then goes back into the same switch but because this is a manged switch, the port it is connected to is configured as its own virtual LAN. The current Windows Media Center and a 2nd wireless access point sit on this Virtual LAN. This enables the LMCE Core to use DHCP to its clients they way it is intended but also seperates my main internal network.<br />
<br />
My next step is to move the Theater room onto the VLAN once i have the Living Room on the LMCE system and the wife converted.<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17936User:Pnuts2009-03-09T21:27:40Z<p>Pnuts: /* Installation Issues */</p>
<hr />
<div>[[category:User Setups]]<br />
<br />
= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Pending Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the BIOS\preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
My wife is not yet ready t let me take the full plunge, So I have a hybrid network going...<br />
<br />
If you look at the image, ill explain what is happening a little better. The Wireless router after modem is handing out DHCP address to the internal network and wireless devices, The LMCE Core external network addapter included.<br />
<br />
The LMCE Core's internal adapter then goes back into the same switch but because this is a manged switch, the port it is connected to is configured as its own virtual LAN. The current Windows Media Center and a 2nd wireless access point sit on this Virtual LAN. This enables the LMCE Core to use DHCP to its clients they way it is intended but also seperates my main internal network.<br />
<br />
My next step is to move the Theater room onto the VLAN once i have the Living Room on the LMCE system and the wife converted.<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17935User:Pnuts2009-03-09T21:27:07Z<p>Pnuts: /* Onboard Raid Controller */</p>
<hr />
<div>[[category:User Setups]]<br />
<br />
= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the BIOS\preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
My wife is not yet ready t let me take the full plunge, So I have a hybrid network going...<br />
<br />
If you look at the image, ill explain what is happening a little better. The Wireless router after modem is handing out DHCP address to the internal network and wireless devices, The LMCE Core external network addapter included.<br />
<br />
The LMCE Core's internal adapter then goes back into the same switch but because this is a manged switch, the port it is connected to is configured as its own virtual LAN. The current Windows Media Center and a 2nd wireless access point sit on this Virtual LAN. This enables the LMCE Core to use DHCP to its clients they way it is intended but also seperates my main internal network.<br />
<br />
My next step is to move the Theater room onto the VLAN once i have the Living Room on the LMCE system and the wife converted.<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17934User:Pnuts2009-03-09T21:20:27Z<p>Pnuts: </p>
<hr />
<div>[[category:User Setups]]<br />
<br />
= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
My wife is not yet ready t let me take the full plunge, So I have a hybrid network going...<br />
<br />
If you look at the image, ill explain what is happening a little better. The Wireless router after modem is handing out DHCP address to the internal network and wireless devices, The LMCE Core external network addapter included.<br />
<br />
The LMCE Core's internal adapter then goes back into the same switch but because this is a manged switch, the port it is connected to is configured as its own virtual LAN. The current Windows Media Center and a 2nd wireless access point sit on this Virtual LAN. This enables the LMCE Core to use DHCP to its clients they way it is intended but also seperates my main internal network.<br />
<br />
My next step is to move the Theater room onto the VLAN once i have the Living Room on the LMCE system and the wife converted.<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17933User:Pnuts2009-03-09T21:18:54Z<p>Pnuts: </p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
== Network Explaination ==<br />
My wife is not yet ready t let me take the full plunge, So I have a hybrid network going...<br />
<br />
If you look at the image, ill explain what is happening a little better. The Wireless router after modem is handing out DHCP address to the internal network and wireless devices, The LMCE Core external network addapter included.<br />
<br />
The LMCE Core's internal adapter then goes back into the same switch but because this is a manged switch, the port it is connected to is configured as its own virtual LAN. The current Windows Media Center and a 2nd wireless access point sit on this Virtual LAN. This enables the LMCE Core to use DHCP to its clients they way it is intended but also seperates my main internal network.<br />
<br />
My next step is to move the Theater room onto the VLAN once i have the Living Room on the LMCE system and the wife converted.<br />
== Network Image ==<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17932User:Pnuts2009-03-09T21:10:02Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E: EVGA Nvidia 8600 GS 256mb<br><br />
PCI: Hauppauge WinTV-PVR-500<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17931User:Pnuts2009-03-09T21:09:38Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI: 3com Fast EtherLink XL<br><br />
PCI: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Hauppauge WinTV-PVR-500<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17930User:Pnuts2009-03-09T21:06:38Z<p>Pnuts: /* Network Layout */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Hauppauge WinTV-PVR-500<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
<br />
[[{{ns:6}}:Pnuts_Network_Layout.JPG]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17929User:Pnuts2009-03-09T20:54:42Z<p>Pnuts: </p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System =<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Hauppauge WinTV-PVR-500<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
<br />
= Network Layout =<br />
<br />
[[{{ns:6}}:Pnuts_Network_Layout.jpg]]</div>Pnutshttp://wiki.linuxmce.org/index.php?title=File:Pnuts_Network_Layout.JPG&diff=17928File:Pnuts Network Layout.JPG2009-03-09T20:52:36Z<p>Pnuts: </p>
<hr />
<div></div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17883User:Pnuts2009-03-05T07:40:24Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System=<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Hauppauge WinTV-PVR-500<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center that will PXE Boot occasionally. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17882User:Pnuts2009-03-05T07:39:42Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System=<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Hauppauge WinTV-PVR-500<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
This machine is a Windows XP Media Center, That will PXE Boot. Hopefully one day it will become a dedicated MD<br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17881User:Pnuts2009-03-05T07:38:37Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System=<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Hauppauge WinTV-PVR-500<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17880User:Pnuts2009-03-05T07:37:33Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System=<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Samsung 250gb<br><br />
Sata1: Samsung 250gb<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17879User:Pnuts2009-03-05T07:36:58Z<p>Pnuts: /* Onboard Raid Controller */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System=<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 500gb drive<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may attempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here</div>Pnutshttp://wiki.linuxmce.org/index.php?title=User:Pnuts&diff=17878User:Pnuts2009-03-05T07:36:15Z<p>Pnuts: /* Specs */</p>
<hr />
<div>= Pnuts Introduction to LMCE =<br />
Prior to ever hearing about LMCE I had an extensive network that was based around Windows systems with a Windows XP MCE in the living room and an xbox 360 acting as an extender on my media\office room. Other than briefly touching Linux here or there, I know very little about it but have always wanted to learn more.<br />
<br />
A coworker of mine heard about my setup at home and was looking into doing something similar himself. He had read\heard a lot about LMCE and mentioned it to me. Hearing Linux and being a fairly complete Windows user, I did no bother to look into it at all. Several months later, I was talking to the same coworker about possibly setting up webcams in a home i recently purchased to make my own low budget security system and was looking for software to do it with. He again mentioned LMCE and quickly shot over a link to this [[Video|LinuxMCE Video]].<br />
<br />
After watching a minute of the video, I was hooked. I went about researching what i would need to do and planning out how to do it. Now here I am starting a Wiki page of my experiances from start to finish, or rather where i currently am in the setup, who really is ever finished. So here I am. I will update this page as I build out the network so check back for updates.<br />
<br />
= The Complete Home System=<br />
Here I will break out each system that is on my network and touch on any issues or problems i have or have had while getting everything up and running.<br />
<br />
== The Core ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
Mother Board: Intel B875PBZ<br><br />
CPU: Pentium 4 with Hyper Threading<br><br />
RAM: 2gb RAM<br><br />
AGP: ATI All-In-Wonder 2006 Edition Radeon 9600<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-3: Empty<br><br />
PCI-4: 3com Fast EtherLink XL<br><br />
PCI-5: Creative Sound Blaster<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 500gb drive<br><br />
Pata: DL DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here<br />
==== Onboard Raid Controller ====<br />
Instead of the Kubuntu using the settings I choose in the preboot raid setup, Kubuntu is detecting each drive independantly and not as a Raid. I will attempt to use software Raid on the 2x500gb drives to have them in Raid1 (Mirror) after installation is complete. If you would like more information on why this happened, please read this link: https://help.ubuntu.com/community/FakeRaidHowto Perhaps in the future once I become more knowledgable with Linux, I may atempt this.<br />
<br />
== Media Director 1 (not yet installed) ==<br />
A Dell Optiplex 755<br />
=== Specs ===<br />
CPU: E6550 - Dual Core @ 2.33<br><br />
RAM: 4gb RAM<br><br />
PCI-E 16x: EVGA Nvidia 8600 GS 256mb<br><br />
PCI-1: Empty<br><br />
PCI-2: Empty<br><br />
PCI-E 1x: Empty<br><br />
Sata0: Western Digital 320gb Caviar drive<br><br />
Sata1: Seagate Barracuda 250gb drive<br><br />
Sata2: Seagate Barracuda 250gb drive<br><br />
Sata3: H+L DVD Recorder DVD+-RW<br><br />
<br />
=== Installation Issues ===<br />
I will break out any issues I encountered with the above system here</div>Pnuts