Difference between revisions of "Samsung PN-51E 5-Series"
From LinuxMCE
Ardirtbiker (Talk | contribs) |
Ardirtbiker (Talk | contribs) |
||
| Line 8: | Line 8: | ||
| __TOC__ | | __TOC__ | ||
|} | |} | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| Line 18: | Line 23: | ||
**Plasma | **Plasma | ||
**1080p capable with lmce | **1080p capable with lmce | ||
| − | |||
=Equipment Needed= | =Equipment Needed= | ||
**RS232 interface using 'DB9 to 3.5mm Stereo' cable [http://www.cableclub.com/ipod-computer-data-cable-p-1344.html] | **RS232 interface using 'DB9 to 3.5mm Stereo' cable [http://www.cableclub.com/ipod-computer-data-cable-p-1344.html] | ||
| − | |||
=Display Setup= | =Display Setup= | ||
| Line 28: | Line 31: | ||
***Set Control>Hotel Option>Hotel Mode to ON, then power off and power on. | ***Set Control>Hotel Option>Hotel Mode to ON, then power off and power on. | ||
**Enter OnScreen Menu: Go to Picture>Picture Options>Size and change to Screen Fit. (this will fix overscan issues) | **Enter OnScreen Menu: Go to Picture>Picture Options>Size and change to Screen Fit. (this will fix overscan issues) | ||
| − | |||
=Creating a Template= | =Creating a Template= | ||
Revision as of 01:33, 15 January 2013
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | works | 14th Jan 2013 | ardirtbiker |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Basics
- General info
- 51 inch
- Plasma
- 1080p capable with lmce
Equipment Needed
- RS232 interface using 'DB9 to 3.5mm Stereo' cable [1]
Display Setup
- Enter Maintenance Menu: Press 'mute 1 8 2 power' buttons quickly
- Set Control>Hotel Option>Hotel Mode to ON, then power off and power on.
- Enter OnScreen Menu: Go to Picture>Picture Options>Size and change to Screen Fit. (this will fix overscan issues)
- Enter Maintenance Menu: Press 'mute 1 8 2 power' buttons quickly
Creating a Template
- Create a device template using RS232 communications.
- Set the Comm Port Baud to 9600
- Set the Comm Port on PC to correct one
- Set the Comm Port Parity/Bit/Stop to N81
- Select the Uses Group/Codeset to 2005 Samsung Plasma
- Create a device template using RS232 communications.
This should get you going. I've only utilized Power On and Power Off.
