Difference between revisions of "Samsung PN-51E 5-Series"
From LinuxMCE
Ardirtbiker (Talk | contribs) |
Ardirtbiker (Talk | contribs) |
||
| Line 27: | Line 27: | ||
=Equipment Needed= | =Equipment Needed= | ||
| − | + | *RS232 interface using 'DB9 to 3.5mm Stereo' cable [http://www.cableclub.com/ipod-computer-data-cable-p-1344.html] | |
=Display Setup= | =Display Setup= | ||
| − | Configure the following: | + | *Configure the following: |
**Enter Maintenance Menu: Press 'mute 1 8 2 power' buttons quickly | **Enter Maintenance Menu: Press 'mute 1 8 2 power' buttons quickly | ||
***Set Control>Hotel Option>Hotel Mode to ON, then power off and power on. | ***Set Control>Hotel Option>Hotel Mode to ON, then power off and power on. | ||
| Line 36: | Line 36: | ||
=Creating a Template= | =Creating a Template= | ||
| − | Create a device template using RS232 communications. | + | *Create a device template using RS232 communications. |
** Set the Comm Port Baud to 9600 | ** Set the Comm Port Baud to 9600 | ||
** Set the Comm Port on PC to correct one | ** Set the Comm Port on PC to correct one | ||
Revision as of 01:37, 15 January 2013
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | works | 14th Jan 2013 | ardirtbiker |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Basics
- General info
- 51 inch
- Plasma
- 1080p capable with lmce
Equipment Needed
- RS232 interface using 'DB9 to 3.5mm Stereo' cable [1]
Display Setup
- Configure the following:
- Enter Maintenance Menu: Press 'mute 1 8 2 power' buttons quickly
- Set Control>Hotel Option>Hotel Mode to ON, then power off and power on.
- Enter OnScreen Menu: Go to Picture>Picture Options>Size and change to Screen Fit. (this will fix overscan issues)
- Enter Maintenance Menu: Press 'mute 1 8 2 power' buttons quickly
Creating a Template
- Create a device template using RS232 communications.
- Set the Comm Port Baud to 9600
- Set the Comm Port on PC to correct one
- Set the Comm Port Parity/Bit/Stop to N81
- Select the Uses Group/Codeset to 2005 Samsung Plasma
This should get you going. I've only utilized Power On and Power Off.
