Difference between revisions of "User talk:Bernz"
From LinuxMCE
m |
|||
| Line 8: | Line 8: | ||
Scratch pad: | Scratch pad: | ||
| − | * I browsed through /var/log/Xorg.0.log, and discovered a few modelines that are compatible with the TV, including one that looks promising: <pre>Modeline "1920x1080" 148.50 1920 2008 2052 2200 1080 1084 1089 1124 +hsync +vsync</pre> | + | * I browsed through /var/log/Xorg.0.log, and discovered a few modelines that are compatible with the TV, including one that looks promising: <pre>Modeline "1920x1080" 148.50 1920 2008 2052 2200 1080 1084 1089 1124 +hsync +vsync</pre> Okay, this modeline doesn't work perfectly; the image is off-center to the right, so I will have to keep playing with it. Unfortunately, '''xvidtune''' does not support my video hardware (the UniChrome). |
| + | * I've tried my laptop with the TV, using the VGA-out. Windows XP Home is able to provide relatively good image quality at 1364x768, a resolution which the TV can match perfectly as a full 16:9 wide-screen format. I can also run at 1920x1080, but for my setup, there are two drawbacks: | ||
| + | *# the amount of video swim, despite being fairly small, exceeds my personal tolerance | ||
| + | *# the video hardware is a little too slow to watch full-screen video at full frame rate | ||
==== Annoyances (and Maybe Solutions) ==== | ==== Annoyances (and Maybe Solutions) ==== | ||
| − | * The combination of TV and PC has resulted in the first (and maybe last) column of characters in text mode to be off-screen. This isn't horrible, but annoying to be sure. | + | * '''Misaligned/badly sized text mode(s)''': The combination of TV and PC has resulted in the first (and maybe last) column of characters in text mode to be off-screen. This isn't horrible, but annoying to be sure. |
| − | ** There is an easy, sure-fire fix for this one: Menu (button on remote) -> Picture (option) -> Screen -> Position. Move the screen right (or wherever else necessary) to bring the hidden pixels into view. It is possible to center the screen perfectly; I leave it to your imagination to figure out a way (there's more than one ;-). | + | ** There is an easy, sure-fire fix for this one: ''Menu'' (button on remote) -> ''Picture'' (option) -> ''Screen'' -> ''Position''. Move the screen right (or wherever else necessary) to bring the hidden pixels into view. It is possible to center the screen perfectly; I leave it to your imagination to figure out a way (there's more than one ;-). |
| − | * | + | * '''Counter-intuitive OSD behaviour(s)''': The menu buttons on the remote feel good, and I often hit the desired one accidentally when guessing (still learning the feel of it). The menu layouts are pretty awesome, too, but I've found one quirk when I adjust picture mode settings for User#. Once I've reached a specific field, if I want to decrease the value (usually "arrow-left" on the remote), pressing left jumps back up the menu stack. I would prefer this solution (other ideas are welcomed): |
** (Suggested fix for manufacturer) Change the UI on the picture mode User1/User2 control panel (Contrast, Brightness, etc), so that "arrow-left" begins to adjust the selected item, just as "arrow-right" does. In addition, change "Press [MENU] to confirm" to "Press [ENTER] to confirm or [MENU] to cancel" and change/add functionality to match the new text. That would perfect the OSD UI! :-) | ** (Suggested fix for manufacturer) Change the UI on the picture mode User1/User2 control panel (Contrast, Brightness, etc), so that "arrow-left" begins to adjust the selected item, just as "arrow-right" does. In addition, change "Press [MENU] to confirm" to "Press [ENTER] to confirm or [MENU] to cancel" and change/add functionality to match the new text. That would perfect the OSD UI! :-) | ||
| + | * '''Video swim''': in higher-resolution modes, vertical lines may have a shimmer caused by the tiny sinusoidal horizontal oscillation of their component pixels, so the vertical edges of windows and other lines appear to have a slight shimmer/instability | ||
| + | ** I'm not sure there's a proper fix, but the effect can be reduced by using high quality, shielded cables, as short as possible, with no loops, and applying general electrical noise abatement techniques | ||
| + | ** Generally, swim increases as with resolution; often, even a slightly lower resolution can offer a great improvement in stability | ||
Revision as of 16:35, 16 July 2007
I discovered LinuxMCE via one of the newsaggs (I think it was reddit). I had been searching for a whole-home multimedia and automation setup, and this looks like one of the best bundles out there.
I'm slowly (and I stress that) building a multimedia extravaganza in my home. I intend to have everything automated as much as possible, mainly because it's possible -- I mean, we stopped living in caves, even though they were a reasonable form of shelter, right?
Anyway, I think it would be great to build a knowledge store about how well various hardware works with LinuxMCE. I call it the Suggested hardware page.
I am going to record my experiences installing Kubuntu Feisty (7.04) on an Epia CN100000EG Mini-ITX PC, with an LG 42LB5D LCD TV as the main display device, and a Harman/Kardon AVR245 receiver for audio. I'm starting to suspect the CN10000EG is a little underpowered for my purposes, although I don't intend to do anything much more CPU-intensive than playing DVDs, or digitized video or music. If you have a suggestion for a better motherboard that is fanless, please email me about it. Cheers!
Scratch pad:
- I browsed through /var/log/Xorg.0.log, and discovered a few modelines that are compatible with the TV, including one that looks promising:
Modeline "1920x1080" 148.50 1920 2008 2052 2200 1080 1084 1089 1124 +hsync +vsync
Okay, this modeline doesn't work perfectly; the image is off-center to the right, so I will have to keep playing with it. Unfortunately, xvidtune does not support my video hardware (the UniChrome). - I've tried my laptop with the TV, using the VGA-out. Windows XP Home is able to provide relatively good image quality at 1364x768, a resolution which the TV can match perfectly as a full 16:9 wide-screen format. I can also run at 1920x1080, but for my setup, there are two drawbacks:
- the amount of video swim, despite being fairly small, exceeds my personal tolerance
- the video hardware is a little too slow to watch full-screen video at full frame rate
Annoyances (and Maybe Solutions)
- Misaligned/badly sized text mode(s): The combination of TV and PC has resulted in the first (and maybe last) column of characters in text mode to be off-screen. This isn't horrible, but annoying to be sure.
- There is an easy, sure-fire fix for this one: Menu (button on remote) -> Picture (option) -> Screen -> Position. Move the screen right (or wherever else necessary) to bring the hidden pixels into view. It is possible to center the screen perfectly; I leave it to your imagination to figure out a way (there's more than one ;-).
- Counter-intuitive OSD behaviour(s): The menu buttons on the remote feel good, and I often hit the desired one accidentally when guessing (still learning the feel of it). The menu layouts are pretty awesome, too, but I've found one quirk when I adjust picture mode settings for User#. Once I've reached a specific field, if I want to decrease the value (usually "arrow-left" on the remote), pressing left jumps back up the menu stack. I would prefer this solution (other ideas are welcomed):
- (Suggested fix for manufacturer) Change the UI on the picture mode User1/User2 control panel (Contrast, Brightness, etc), so that "arrow-left" begins to adjust the selected item, just as "arrow-right" does. In addition, change "Press [MENU] to confirm" to "Press [ENTER] to confirm or [MENU] to cancel" and change/add functionality to match the new text. That would perfect the OSD UI! :-)
- Video swim: in higher-resolution modes, vertical lines may have a shimmer caused by the tiny sinusoidal horizontal oscillation of their component pixels, so the vertical edges of windows and other lines appear to have a slight shimmer/instability
- I'm not sure there's a proper fix, but the effect can be reduced by using high quality, shielded cables, as short as possible, with no loops, and applying general electrical noise abatement techniques
- Generally, swim increases as with resolution; often, even a slightly lower resolution can offer a great improvement in stability
