User:Rperre

Introduction

I am a Helicopter Instructor Pilot with a wish to automate our home, linuxMCE seems to be perfect for what I want to do in our house. I'm fairly new to Linux, but learn quickly, I have some experience with programming from my college years, and always tweaking stuff to make it work better/easier. Our house is a 1 floor setup with an existing Nutone intercom and an old Alarm system we do not use at the moment, I will integrate these systems into my setup as time goes by. We have 4 Bedrooms and 3 bathrooms, Kitchen, Livingroom, Playroom, Office, Pool area that I would like to provide this system with. Initially the Livingroom, Playroom, Kitchen and Office will be added and than I will expand as time goes by and I found the right "pnp" hardware. Master Bedroom and Bath are next, than we'll go to the patio for outside entertainment.

CORE SETUP

As I had a lot of hardware "laying around" from my computer upgrading spurts I have every other year or so, I decided to gives this setup a try.

Motherboard: Asus A7N8X Deluxe

 Socket A with a AMD Athlon XP 2600+ installed
 Memory at 1Gb PC3200 (will upgrade to 2Gb, still have a slot open)
 2 Internal NICs, 3COM, and nforce (forcedeth) both 100Mb max, need upgrade internal Nic to Gb.
 Audio is an ALC650 with 5.1 output

Videocard: Axle Geforce 7600GS

 512Mb of memory
 AGP8x

Storage: OCZ core2 SATA II 60Gb SSD

Drive: Generic DVD-drive

Power supply: ANTEC True430P

Case: old generic case which is overheating, will go to an ANTEC full tower for space and enough cooling

NAS

 Mvixbox with 2 drives for a total of 1.5Tb
 Simpleshare with 250Gb for daily use on our home computers and backup of Core image

INSTALLATION

Ubuntu 0810

This Asus motherboard has 2 Sata connectors and hooked up the SSD to the Primary and made sure the jumper was set to enable SATA, installation was no problem.

Video, Sound and drive are all up and running.

I disabled the nvidia network card internally and added a gigabit network card for the internal network. The nvidia 'forcedeth' seemed to be getting a new nic name each reboot, disabling this one was the easiest for me.

LinuxMCE 0810 beta2

Installed it from the DVD with no problems

I'm using UI2 (no alpha blending, but think it will work just fine)

CM11A X10 controller

I had a box full of X10 devices in my garage from a previous attempt to automate the house, I have integrated some table lights in the system.

Make sure to add the CM11A manually and after add your devices as childs, works fine. I added a repeater/coupler because of the 2 bus system here in the USA, still tweaking this as i type this.

Hauppauge PVR500

Worked out of the box installed in my Core/hybrid, getting local channels available on the cable

NAS Mvixbox

MEDIA DIRECTORS

Got two Zotac ION ITX C-U boards, connected one to my LCD TV and set it up for PXE boot, this works out of the box, i got the black screen when the AVwizard should come up, pressed the number "3" and there it was. I choose hdmi2, 1080p, 60hz and it works fine.

The only thing I always see, is that you have to restart your MD completely after the whole installation is done. You'll get a black screen otherwise. After restart everything is fine.

Also looking at other possibilities, especially cheap but performing for e.g. the bedroom TV's that don't require 1080p, I can't see the difference anyway between 720p and 1080p. But if it's possible it will be fine and future proof.

ORBITERS and REMOTES

Currently using an old Palm TX and my laptop with the Web orbiter, but will expand to gyro remote and/or WEBDT 366 as time goes, not interested in the bluetooth capabilities. The Palm TX does not work, it constantly goes to the lighting floorplan and stays there, haven't troubleshoot this much, and will when i have time.

Bought a windows vista MCE remote, this was plug and play with mceusb2 selected, mceusb will not work with these vista remotes.

I am also very interested in the 2440 all in one boards, which would be perfect to put in place of the current intercom system for fixed orbiters around the house.

LIVING ROOM AV GEAR

TV: 65" Hitachi DLP with a max resolution of 1080i 65SWX20B

STB: Scientific Atlanta Explorer 8300HDC

RECEIVER: Onkyo SR606

DVD: Sony 5 disc multi DVD player DVP-NC665P

SPEAKERS: All Bose with the 701's up front 301's in the back and the VCS10 in the middle, still have to get a good powered SUB or amplify our current passive one.

All of these have an IR connection in the back for control.

I have learned all IR remote codes and these will be submitted to the sqlcvs database.

PLAYROOM/HOME THEATER AV GEAR

TV: 47" Philips LCD TV (max 1080p) 47PFL5432D/37

STB: Scientific Atlanta Explorer 3250HD

RECEIVER/DVD: Sony 5.1 all in one Home Theater System DAV-HDX265

I have learned all IR remote codes and these will be submitted to the sqlcvs database.

Working on

Trying to get the IR control to work correctly, just playing with some settings when i have time.

All in all it's not very difficult to setup, but it does require some reading and searching the forums/wiki/web for answers, especially when you are a linux noob like me.