Difference between revisions of "HarmanKardon AVR245"
From LinuxMCE
(moved text from "suggested Hardware") |
m |
||
| Line 4: | Line 4: | ||
* RS232 port on rear is only for firmware upgrades, according to manual, however there is an external IR input jack, so external control via PC will just require a little more "glue" | * RS232 port on rear is only for firmware upgrades, according to manual, however there is an external IR input jack, so external control via PC will just require a little more "glue" | ||
* dim/night mode for display, which dims the VFD, and shuts off the inner blue glow of the volume control | * dim/night mode for display, which dims the VFD, and shuts off the inner blue glow of the volume control | ||
| − | + | * There is an ''A/V Delay'' setting, which can be used to add latency to the audio in order to sync with other audio output devices. I noticed that my LG 42LB5D has a bit of audio latency on its speakers, and until I figure out how to eliminate it, I have set my AVR245 to 80ms of delay, which syncs it up nicely with the TV. | |
[[Category: Audio]] | [[Category: Audio]] | ||
Revision as of 01:22, 25 August 2007
- 2 x HDMI-in to HDMI-out (selectable)
- OSD setup
- hard power-switch (in/out toggle) next to soft power switch (push button)
- RS232 port on rear is only for firmware upgrades, according to manual, however there is an external IR input jack, so external control via PC will just require a little more "glue"
- dim/night mode for display, which dims the VFD, and shuts off the inner blue glow of the volume control
- There is an A/V Delay setting, which can be used to add latency to the audio in order to sync with other audio output devices. I noticed that my LG 42LB5D has a bit of audio latency on its speakers, and until I figure out how to eliminate it, I have set my AVR245 to 80ms of delay, which syncs it up nicely with the TV.
