Difference between revisions of "LG Serial Control TVs"

From LinuxMCE
Jump to: navigation, search
(Controlling LG TV's with RS232 Serial control)
 
Line 1: Line 1:
 +
Leave the TV set to ID 1, which is the factory default, and use a cross over cable.  Then it is plug and play.
 +
 
The manual explaining the protocol can be found here on page 73: http://us.lge.com/download/product/file/1000002412/20LS7D_manual.pdf
 
The manual explaining the protocol can be found here on page 73: http://us.lge.com/download/product/file/1000002412/20LS7D_manual.pdf

Revision as of 22:21, 28 February 2008

Leave the TV set to ID 1, which is the factory default, and use a cross over cable. Then it is plug and play.

The manual explaining the protocol can be found here on page 73: http://us.lge.com/download/product/file/1000002412/20LS7D_manual.pdf