Difference between revisions of "LM15A Socket Rocket"

From LinuxMCE
Jump to: navigation, search
(New page: Category: Automation Category: Lighting Category: Hardware Category: Power Line Control Category: X10 This is a simple screw in device that screws in between the bulb ...)
 
Line 4: Line 4:
 
[[Category: Power Line Control]]
 
[[Category: Power Line Control]]
 
[[Category: X10]]
 
[[Category: X10]]
 +
 +
{{versioninfo|810Status=relevant|810UpdatedDate=14th Feb 2011|810UpdatedBy=Techstyle}}
  
 
This is a simple screw in device that screws in between the bulb and the fixture.  It can be turned on or off with LMCE
 
This is a simple screw in device that screws in between the bulb and the fixture.  It can be turned on or off with LMCE

Revision as of 02:50, 15 February 2011


Version Status Date Updated Updated By
710 Unknown N/A N/A
810 relevant 14th Feb 2011 Techstyle
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

This is a simple screw in device that screws in between the bulb and the fixture. It can be turned on or off with LMCE

Setting up the device

  • Set the code of the device following the instructions in the manual
  • goto Webadmin -> Wizard -> Devices -> Lights
  • Add device
  • Select 'Standard Relay Light' (template #1786)
  • Enter the house code into the 'Port/Channel Number' box and give it a more descriptive name in the 'description' box, also set the 'PK_FloorplanObjectType' to a suitable item (like 'ceiling light')
  • Reload the router
  • use the floor plan wizard to put the device on the floor plan at the correct location and the regen the orbiter