Difference between revisions of "LM15A Socket Rocket"

From LinuxMCE
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 4: Line 4:
 
[[Category: Power Line Control]]
 
[[Category: Power Line Control]]
 
[[Category: X10]]
 
[[Category: X10]]
 
 
{{versioninfo|810Status=relevant|810UpdatedDate=14th Feb 2011|810UpdatedBy=Techstyle}}
 
{{versioninfo|810Status=relevant|810UpdatedDate=14th Feb 2011|810UpdatedBy=Techstyle}}
 +
  
 
This is a simple screw in device that screws in between the bulb and the fixture.  It can be turned on or off with LMCE
 
This is a simple screw in device that screws in between the bulb and the fixture.  It can be turned on or off with LMCE
Line 14: Line 14:
 
* goto Webadmin -> Wizard -> Devices -> Lights
 
* goto Webadmin -> Wizard -> Devices -> Lights
 
* Add device
 
* Add device
* Select 'Standard Relay Light' (template #1786)
+
* Select 'Light Switch (dimmable)' (template #38)
 
* Enter the house code into the 'Port/Channel Number' box and give it a more descriptive name in the 'description' box, also set the 'PK_FloorplanObjectType' to a suitable item (like 'ceiling light')
 
* Enter the house code into the 'Port/Channel Number' box and give it a more descriptive name in the 'description' box, also set the 'PK_FloorplanObjectType' to a suitable item (like 'ceiling light')
 
* Reload the router
 
* Reload the router
 
* use the floor plan wizard to put the device on the floor plan at the correct location and the regen the orbiter
 
* use the floor plan wizard to put the device on the floor plan at the correct location and the regen the orbiter

Latest revision as of 06:28, 15 February 2011

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 relevant 14th Feb 2011 Techstyle
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information


This is a simple screw in device that screws in between the bulb and the fixture. It can be turned on or off with LMCE

Setting up the device

  • Set the code of the device following the instructions in the manual
  • goto Webadmin -> Wizard -> Devices -> Lights
  • Add device
  • Select 'Light Switch (dimmable)' (template #38)
  • Enter the house code into the 'Port/Channel Number' box and give it a more descriptive name in the 'description' box, also set the 'PK_FloorplanObjectType' to a suitable item (like 'ceiling light')
  • Reload the router
  • use the floor plan wizard to put the device on the floor plan at the correct location and the regen the orbiter