Difference between revisions of "Linksys spa-3102"

From LinuxMCE
Jump to: navigation, search
(page in progress)
Line 46: Line 46:
  
 
===Configuring FreePBX ===
 
===Configuring FreePBX ===
 +
*Step 1
 +
** Log into the webadmin.
 +
** Using the top navigations, goto Advanced -> Configuration -> Phones Setup.
 +
***This will take you to the freePBX panel. Take care to only change designated settings as you can mess things up.
 +
**On the left hand side, choose '''Trunks''' from the menu.
 +
**This will show you the existing trunks (phone lines). Choose '''Add Trunk'''.
 +
**Then choose '''Add Sip Trunk'''.
 +
**Next are the options presented:
 +
***

Revision as of 08:34, 10 June 2008

Linksys SPA-3102

Specifications

The Linksys SPA3102 features the ability to connect standard telephones and fax machines to IP-based data networks with the additional benefit of an integrated connection for legacy telephone network "hop-on, hop-off" applications.

  • IP Telephony features
    • VoIP Protocols SIP v2
    • Voice Codecs G.711, G.723.1, G.729a, G.726
    • Telephony Interfaces 1 phone (FXS), 1 line (FXO)
    • IP Telephony Features Echo cancellation (G.168)

Setting up with linuxMCE

Configuring the Device

  • Step 1 - Initial setup.
    • Connect the SPA-3102 to your internal network (the one connected to the lmce subnet)
    • Proceed with initial configuration via the administration page. Once you set passwords and locale settings, you can move to the next step
    • Note, you can leave the dhcp and network settings as is. We will not be using the routing functions of this device. You will need to make a note on the address assigned to the device.
  • Step 2 - SIP connection settings.
    • Click the PSTN Line settings.
    • Choose 'Admin' and 'Advanced' option in the top left right corner to see all available options.
      • Do not change anything other than what you need. There are a lot of options!
      • Line Option Set to enable.
      • Sip Settings
        • Make sure the port is set to 5061
      • Proxy and registration
        • Proxy: the ip address of your core.
        • Register: Yes.
        • Make calls without registration: - Not tested but set to yes.
        • Answer calls without registration: Not tested but set to yes.
      • Subscriber Information
        • For Display Name I put 'Landline'.
        • For user id I put the extension I created for this line.
        • For password I put the password for the extension
        • For 'Use Auth Id' I chose no.
      • Dial Plans
        • Under Dial Plan 2 add this '(<S0:600>)
      • PSTN-To-VoIP Gateway Setup
        • PSTN-To-VoIP Gateway Enable: Yes
        • PSTN Ring Thru Line 1: No
        • PSTN CID For VoIP CID: Yes
        • PSTN Caller Default DP: 2
          • This is the dial plan we changed earlier.
          • You may need to change some of the other items such as FXO timing, but thats beyond this article for now.

Configuring FreePBX

  • Step 1
    • Log into the webadmin.
    • Using the top navigations, goto Advanced -> Configuration -> Phones Setup.
      • This will take you to the freePBX panel. Take care to only change designated settings as you can mess things up.
    • On the left hand side, choose Trunks from the menu.
    • This will show you the existing trunks (phone lines). Choose Add Trunk.
    • Then choose Add Sip Trunk.
    • Next are the options presented: