Difference between revisions of "Mac MediaDirector"

From LinuxMCE
Jump to: navigation, search
(Setup a Mac as MediaDirector)
(Setup a Mac as MediaDirector)
Line 10: Line 10:
  
 
'''Write DMG File to USB:'''
 
'''Write DMG File to USB:'''
 +
 +
Open the Terminal.app and type:
  
 
   dd if=/dev/rdisk1 of=/dev/rdisk2 bs=1m
 
   dd if=/dev/rdisk1 of=/dev/rdisk2 bs=1m
 +
 +
and hit enter. Wait till you see the command prompt again.
  
 
Boot your Mac with USB plugged in. Hold down alt/option to get the boot menu. Select **refit** and wait.
 
Boot your Mac with USB plugged in. Hold down alt/option to get the boot menu. Select **refit** and wait.
 
If all runs smooth, you should see a menu showing "LinuxMCE" and it will start boot gpxe in 2 seconds.
 
If all runs smooth, you should see a menu showing "LinuxMCE" and it will start boot gpxe in 2 seconds.

Revision as of 12:15, 18 September 2012

Setup a Mac as MediaDirector

  • Download DMG File: http://deb.linuxmce.org/refit-syslinux-gpxe_small_v2.dmg (it contains all partitions and files needed)
  • Open .dmg-File and plug in usb drive
  • Open disk utilities
  • deactivate partitions of .dmg-File and USB stick using "Disk Utility" on Mac. DO NOT UNMOUNT!
  • get device names using "Disk Utility": command+i shows the device identifier, when its deactivated the device names gets an "r" as prefix
    • dmg: disk1 -> rdisk1
    • usb: disk2 -> rdisk2

Write DMG File to USB:

Open the Terminal.app and type:

 dd if=/dev/rdisk1 of=/dev/rdisk2 bs=1m

and hit enter. Wait till you see the command prompt again.

Boot your Mac with USB plugged in. Hold down alt/option to get the boot menu. Select **refit** and wait. If all runs smooth, you should see a menu showing "LinuxMCE" and it will start boot gpxe in 2 seconds.