Panasonic BL-C10

From LinuxMCE
Revision as of 01:35, 4 January 2011 by Purps (Talk | contribs)

Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Works 3rd Jan 2011 purps
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

Features

  • Stylish & compact
  • Human Detection Sensor
If it detects someone, it notifies you by e-mail!
  • Color Night View mode
View images even in low light
  • Privacy mode
Privacy mode ensures your privacy.
  • Setup is easy with UPnP
Even a beginner can setup the camera thanks to UPnP support!
  • Camera control
Even when away from home, you can change the direction of the camera lens!
Pan/Tilt
Viewing the camera via mobile phone
Other features
Multi-camera feature
Image buffer feature
  • Viewnetcam.com service
  • Built-in web server

The configuration page : http://<camera_ip>/CgiStart

Panasonic BL-C10 website.

Installation

This camera can either be installed as a Motion device (but Pan/Tilt/Zoom will not work, there are various mentions of this on the forums) or it can be installed as a simple viewer with Pan/Tilt/Zoom controls (this is PnP).

I did both; once under motion (for recording motion), and then as a viewer (for the Scenarios). This may not be the best way of doing things, but it worked for me.

Note: If to begin with the camera is not detected, perform a factory reset; this is achieved by holding the reset button down for a few seconds. Especially important if you bought the camera second hand.

Motion

Viewer