Difference between revisions of "Programmer's Guide"

From LinuxMCE
Jump to: navigation, search
m (Introduction to the LinuxMCE Architecure)
Line 1: Line 1:
 +
[[Category: Programmer's Guide]]
 +
 +
This guide explains the architecture of the main C++ code of LinuxMCE.
 +
 +
A new tutorial for [[Developing a DCE Device]] has just been added to the wiki. While we're creating our own Doxygen documentation, the most recent information regarding architecture and getting started with development can be found on the "[[Developers Guide]]" page, and, the [http://plutohome.com/support/doxygen/ Pluto Doxygen] is still online.
 +
 +
 
==Introduction to the LinuxMCE Architecture==
 
==Introduction to the LinuxMCE Architecture==
  
'''[[Developers Guide]] is the most recent information regarding architecture and getting started with development. We have also created a new tutorial for [[Developing a DCE Device]]'''
+
==== Origins of LinuxMCE ====
 +
In 2006, LinuxMCE was forked from Pluto's linux distribution because Pluto was designed as a 'turn it on and press play' appliance, rather than a traditional software application. While LinuxMCE includes hundreds of scripts and utilities from Pluto, it is designed with as a modular system to which many other OSS projects can be integrated.
  
LinuxMCE includes hundreds of scripts and utilities that were forked from Pluto's linux distribution in 2006. Pluto wrote these to create a 'turn it on and press play' appliance, rather than a traditional software application.
+
To learn more about Pluto's code, please consult the [http://plutohome.com/support/doxygen/ Doxygen documentation] which details all the scripts and utilities that make up the Pluto distribution.
 +
{{p}}
  
This guide explains the architecture of the main C++ code. There is Doxygen documentation for all the scripts and utilities that make up the pluto distribution [http://plutohome.com/support/doxygen/ here]. We'll create our own Doxygen documentation soon...
+
==== Why LinuxMCE? ====
 +
 
 +
LinuxMCE has been designed as a Linux distribution that orchestrates all the numerous OSS applications that that run on the home PC of the 21st century home. To the end user, LinuxMCE aims to appear to be one single application with a single user interface, hiding the multitude of software it is comprised of. <br>
 +
Unlike Pluto which is a platform for developing "smart home modules that all work together", LinuxMCE's primary mission is to benefit from the work at Pluto and others, by making sure our DCERouter is 100% compatible with theirs. We are trying to do something bigger than just an Asterisk distro, or a MythTV distro, etc. We're combining many applications into an integrated whole. We're doing this the UNIX way, using a messaging protocol over sockets, so that these applications can still be developed independently and added or removed from LinuxMCE as desired by the end user.
 +
 
 +
The functionality in LinuxMCE is provided by a variety of open source projects and it's our mission '''to make them work together'''.
 +
{{p}}
 +
 
 +
==== Architecture ====
 +
LinuxMCE uses a '''modular''' architecture. <br>
 +
 
 +
The heart of LinuxMCE, the 'main application' '''DCERouter''' is nothing but a general-purpose message router. It has absolutely no code relating to any of LinuxMCE's functionality--it just relays messages between "Devices".  <br>
 +
 
 +
The functionality of LinuxMCE is entirely in separate programs (aka "'''Devices'''") which all run independently and communicate with each other by passing messages through DCERouter over sockets. There can be hundreds of these "Devices" in a smart home, that do all sorts of things. As shown in the diagram below, many of LinuxMCE's devices are actually "'''wrappers'''" we have written for existing open source programs to allow them to work together seamlessly in a LinuxMCE system. An example of this is the wrapper written for Asterisk: it sends event messages to the DCERouter whenever a phone call comes in, and, receives command messages when it is time to place a call. <br>
 +
How the wrapper communicates with the open source program depends on that project. In the case of Asterisk, the wrapper communicates with Asterisk over a socket. It acts as a translator, converting messages from its socket connection with the DCERouter into messages from its socket connection with Asterisk. The wrapper for the Xine media player links in Xine's own library, and calls Xine functions directly, while for MythTV, the wrapper communicates via a special telnet interface. Each project's wrapper is written to meet its needs.
 +
 
 +
LinuxMCE uses the GPL home automation engine and UI front-end developed by Pluto, the GPL PVR developed by the MythTV folks, the GPL phone system Asterisk originally developed by Mark Spencer at Digium, the GPL Xine program, etc, and combines them into a whole using the DCERouter. Since these OSS projects all have disparate histories and development roadmaps, the wrappers need to be kept up to date as these applications develop, and we're hoping to get some of these applications to talk directly to the DCERouter in the future.
 +
 
 +
The DCE message router and the controllers for the various applications are modular by nature, which means you can just modify a small module at a time, then quickly compile, and test it in the system.
 +
Initially, the build system was a little cumbersome because we inherited it from a commercial company that paid their developers and could expect them to learn a custom build system. One of the immediate development goals was to switch to a more traditional OSS build system so any developer could just jump in and start making changes using a simple "make; sudo make install" for the whole distribution, or just one program, or library within the whole. In time, this was abandoned mostly because nobody was interested in working on it, and it wasn't critical for the developers who were working on it. However, changes have been made that removed the need for a dedicated build server. The source tree can be copied and the individual pieces can be compiled using make. Currently, LinuxMCE is being developed on such a server as it is the most efficient way to produce all the packages in one go. Although this is not necessary for someone developing a C++ DCE device, you can use it if you wish to build packages for a Linux distribution. There is a set of tables in our database that are package definitions which are used in two places:
 +
::* ''MakeRelease'', which builds packages for a given operating system.
 +
::* ''ConfirmDependencies'', which installs packages for a given operating system.  
 +
They both pull their software and dependencies from the same database. You can go to <code>advanced > software > packages</code> to find the list of packages, including those for the Pluto manufacturer which is the data we use to figure out what to install when and where.
  
LinuxMCE uses a modular architecture.  The heart of LinuxMCE, the 'main application' DCERouter is nothing but a general-purpose message router.  It has absolutely no code relating to any of LinuxMCE's functionality--it just relays messages between "Devices".  The functionality of LinuxMCE is entirely in separate programs (aka "Devices") which all run independently and communicate with each other by passing messages through DCERouter over sockets.  There can be hundreds of these "Devices" in a smart home, that do all sorts of things.  As shown in the diagram below, many of LinuxMCE's devices are actually 'wrappers' we have written for existing open source programs to allow them to work together seamlessly in a LinuxMCE system.  For example, the wrapper for Asterisk that sends event messages to DCERouter whenever a phone call comes in, and receives command messages when it is time to place a call.  How the wrapper communicates with the open source program depends on that project.  For example, the Asterisk wrapper communicates with Asterisk over a socket.  It is really a translator converting messages from its socket connection with DCERouter into messages from its socket connection with Asterisk.  The wrapper for the Xine media player links in Xine's own library and calls Xine functions directly, while the wrapper for MythTV communicates via a special telnet interface.
 
  
 
[Need diagram of software modules here].
 
[Need diagram of software modules here].
  
Since there are literally thousands of home automation components and pieces of A/V equipment that require controlling with serial port, USB and Ethernet LinuxMCE communicates with these using GSD. It's fast and simple to use and it can be used to support lighting control systems, climate and pool systems, external devices like IR blasters, cameras, etc.
+
Since there are literally thousands of home automation components and pieces of A/V equipment that require controlling with serial port, USB, or Ethernet, LinuxMCE has been designed with GSD support to enable communication with these various technologies. GSD is a fast protocol which is simple to use, yet flexible enough to be used to support lighting control systems, climate and pool systems, cameras, or external devices such as IR blasters, and much more.
 +
 
 +
{{p}}
 +
 
 +
== So the DCE Router lets applications communicate, so what? ==
 +
 
 +
Imagine you set up a LinuxMCE system in your living room and want the lights to dim when you start watching a movie. If you were using a regular Linux distribution without the DCERouter, you would need to write a launch script for Xine that tells MisterHouse to dim the lights on entry and restore them on exit. If you wanted this to be delayed so that when you exit one movie and enter another shortly thereafter the lights don't dim, the script would become rather complicated. You would need to adapt the script for watching TV in MythTV and any other media application you wanted to use. <br>
 +
With Linux MCE, you just listen for the the start and stop DCE events in a small module, and send out DCE events for the light control. For this one task, you can still just write a script. But you might also want to notify yourself of a call and pause the media player based on who is calling. You can do this with Asterisk and MythTV without a DCERouter, but you need to learn about how Asterisk handles events and MythTV handled OSD notifications; and, you need to write a notifier for Xine because it doesn't have built in notifications. With LinuxMCE you only have to learn a single interface, DCE, and you simply intercept the DCE message sent from Asterisk, then send a DCE message out to the Orbiter UI, and send out a pause DCE message to all media players. This means that these '''tasks can all be handled with just some knowledge of the DCE rather than learning a bunch of protocols and APIs'''. The "Devices" handle the translation of DCE messages for all the applications involved, for the various APIs, and the remote control protocols. <br>
 +
Ordinary users that have no programming knowledge can just hook up events using a tool provided by Pluto, but the good news for programmers is that they don't need domain knowledge of all the different applications they wish to integrate. All that is needed is a basic knowledge of DCE messages, and optionally, the Orbiter overlay UI.
 +
 
 +
DCE does what DBUS and many other protocols were supposed to do, but in contrast, it works. With the wrappers that we inherited from Pluto for various applications, applications don't need to commit to DCE or DBUS or any other protocol for LinuxMCE to communicate with them. DCE messages work today.
 +
 
 +
{{p}}
  
 
==Programmer's Guide Sections==
 
==Programmer's Guide Sections==
Line 37: Line 79:
 
*[[Automated_Builder]]
 
*[[Automated_Builder]]
  
== Why LinuxMCE? ==
+
{{p}}
 
+
The goal of LinuxMCE is to create a Linux distribution that presents a common user interface and orchestrates all the numerous OSS applications that make up a home PC in the 21st century home. To the end user it should appear to be one single application with a single user interface. Unlike Pluto, LinuxMCE's primary mission is not to be a platform for developing "smart home modules that all work together"; but, we hope to benefit from this work at Pluto and elsewhere by making sure our DCERouter is 100% compatible with theirs. We are trying to do something bigger than an Asterisk distro or a MythTV distro, we're combining many applications into an integrated whole. But we're doing this the UNIX way, using a messaging protocol over sockets so that these applications can still be developed independently and added and removed from LinuxMCE as desired by the end user.
+
 
+
The functionality in LinuxMCE is provided by a variety of open source projects and it's our mission to make them work together. LinuxMCE uses the GPL home automation engine and UI front-end developed by Pluto, the GPL PVR developed by the MythTV folks, the GPL phone system Asterisk originally developed by Mark Spencer at Digium, the GPL Xine program, etc. All of these have disparate histories and development roadmaps, the DCERouter combines them into a whole, but the wrappers need to be kept up to date as these applications develop and hopefully we can get some of these applications to talk directly to the DCERouter in the future.
+
 
+
The DCE message router and the controllers for the various applications are modular by nature which means you can just modify small module at a time and compile and test it in the system quickly. Right now (10-10-07), the build system is a little cumbersome because we inherited it from a commercial company that paid their developers and could expect them to learn a custom build system, but one of the immediate development goals is to switch to a more traditional OSS build system so any developer can just jump in and start making changes using a simple "make; sudo make install" for the whole distribution or just one program or library within the whole.
+
 
+
== So the DCE Router lets applications communicate, so what? ==
+
 
+
Say you set up a LinuxMCE system in your living room and want the lights to dim when you start watching a movie. With a regular Linux distribution, without the DCERouter, you would need to write a launch script for Xine that tells MisterHouse to dim the lights on entry and restore them on exit. If you want this to be delayed so that when you exit one movie and enter another shortly thereafter the lights don't dim, the script becomes rather complicated. You will need to adapt the script for watching TV in MythTV and any other media application you want to use. With Linux MCE you just listen for the the start and stop DCE events in a small module and send out DCE events for the light control. Still for this one task you might just write a script. But you might also want to notify yourself of a call and pause the media player based on who is calling. You can do this with Asterisk and MythTV without a DCERouter, but you need to learn about how Asterisk handles events and MythTV handled OSD notifications; and, you need to write a notifier for Xine because it doesn't have built in notifications. With LinuxMCE you only have to learn a single interface, DCE, and you simply intercept the DCE message sent from Asterisk then send a DCE message out to the Orbiter UI and send out a pause DCE message to all media players. This means that these tasks can all be handled with just some knowledge of the DCE rather than learning a bunch of protocols and API's. The "Devices" handle the translation of DCE messages to the various API's and remote control protocols of all the applications involved.
+
 
+
Some of this can even be done by an ordinary users without any programming knowledge by just hooking up events using the tools that Pluto wrote, but for programmers this means you don't need domain knowledge of all the different applications you wish to integrate, you just need to learn about DCE messages, and optionally about the Orbiter overlay UI.
+
 
+
DCE does what DBUS and many other protocols are supposed to do. But it works now. The wrappers for various applications that we inherited from Pluto mean that applications don't need to commit to DCE or DBUS or another protocol for LinuxMCE to communicate with them. If they do, it's less work for us maintaining the wrappers, but DCE messages work today.
+
 
+
[[Category: Programmer's Guide]]
+

Revision as of 05:48, 25 October 2012


This guide explains the architecture of the main C++ code of LinuxMCE.

A new tutorial for Developing a DCE Device has just been added to the wiki. While we're creating our own Doxygen documentation, the most recent information regarding architecture and getting started with development can be found on the "Developers Guide" page, and, the Pluto Doxygen is still online.


Introduction to the LinuxMCE Architecture

Origins of LinuxMCE

In 2006, LinuxMCE was forked from Pluto's linux distribution because Pluto was designed as a 'turn it on and press play' appliance, rather than a traditional software application. While LinuxMCE includes hundreds of scripts and utilities from Pluto, it is designed with as a modular system to which many other OSS projects can be integrated.

To learn more about Pluto's code, please consult the Doxygen documentation which details all the scripts and utilities that make up the Pluto distribution.

Why LinuxMCE?

LinuxMCE has been designed as a Linux distribution that orchestrates all the numerous OSS applications that that run on the home PC of the 21st century home. To the end user, LinuxMCE aims to appear to be one single application with a single user interface, hiding the multitude of software it is comprised of.
Unlike Pluto which is a platform for developing "smart home modules that all work together", LinuxMCE's primary mission is to benefit from the work at Pluto and others, by making sure our DCERouter is 100% compatible with theirs. We are trying to do something bigger than just an Asterisk distro, or a MythTV distro, etc. We're combining many applications into an integrated whole. We're doing this the UNIX way, using a messaging protocol over sockets, so that these applications can still be developed independently and added or removed from LinuxMCE as desired by the end user.

The functionality in LinuxMCE is provided by a variety of open source projects and it's our mission to make them work together.

Architecture

LinuxMCE uses a modular architecture.

The heart of LinuxMCE, the 'main application' DCERouter is nothing but a general-purpose message router. It has absolutely no code relating to any of LinuxMCE's functionality--it just relays messages between "Devices".

The functionality of LinuxMCE is entirely in separate programs (aka "Devices") which all run independently and communicate with each other by passing messages through DCERouter over sockets. There can be hundreds of these "Devices" in a smart home, that do all sorts of things. As shown in the diagram below, many of LinuxMCE's devices are actually "wrappers" we have written for existing open source programs to allow them to work together seamlessly in a LinuxMCE system. An example of this is the wrapper written for Asterisk: it sends event messages to the DCERouter whenever a phone call comes in, and, receives command messages when it is time to place a call.
How the wrapper communicates with the open source program depends on that project. In the case of Asterisk, the wrapper communicates with Asterisk over a socket. It acts as a translator, converting messages from its socket connection with the DCERouter into messages from its socket connection with Asterisk. The wrapper for the Xine media player links in Xine's own library, and calls Xine functions directly, while for MythTV, the wrapper communicates via a special telnet interface. Each project's wrapper is written to meet its needs.

LinuxMCE uses the GPL home automation engine and UI front-end developed by Pluto, the GPL PVR developed by the MythTV folks, the GPL phone system Asterisk originally developed by Mark Spencer at Digium, the GPL Xine program, etc, and combines them into a whole using the DCERouter. Since these OSS projects all have disparate histories and development roadmaps, the wrappers need to be kept up to date as these applications develop, and we're hoping to get some of these applications to talk directly to the DCERouter in the future.

The DCE message router and the controllers for the various applications are modular by nature, which means you can just modify a small module at a time, then quickly compile, and test it in the system. Initially, the build system was a little cumbersome because we inherited it from a commercial company that paid their developers and could expect them to learn a custom build system. One of the immediate development goals was to switch to a more traditional OSS build system so any developer could just jump in and start making changes using a simple "make; sudo make install" for the whole distribution, or just one program, or library within the whole. In time, this was abandoned mostly because nobody was interested in working on it, and it wasn't critical for the developers who were working on it. However, changes have been made that removed the need for a dedicated build server. The source tree can be copied and the individual pieces can be compiled using make. Currently, LinuxMCE is being developed on such a server as it is the most efficient way to produce all the packages in one go. Although this is not necessary for someone developing a C++ DCE device, you can use it if you wish to build packages for a Linux distribution. There is a set of tables in our database that are package definitions which are used in two places:

  • MakeRelease, which builds packages for a given operating system.
  • ConfirmDependencies, which installs packages for a given operating system.

They both pull their software and dependencies from the same database. You can go to advanced > software > packages to find the list of packages, including those for the Pluto manufacturer which is the data we use to figure out what to install when and where.


[Need diagram of software modules here].

Since there are literally thousands of home automation components and pieces of A/V equipment that require controlling with serial port, USB, or Ethernet, LinuxMCE has been designed with GSD support to enable communication with these various technologies. GSD is a fast protocol which is simple to use, yet flexible enough to be used to support lighting control systems, climate and pool systems, cameras, or external devices such as IR blasters, and much more.



So the DCE Router lets applications communicate, so what?

Imagine you set up a LinuxMCE system in your living room and want the lights to dim when you start watching a movie. If you were using a regular Linux distribution without the DCERouter, you would need to write a launch script for Xine that tells MisterHouse to dim the lights on entry and restore them on exit. If you wanted this to be delayed so that when you exit one movie and enter another shortly thereafter the lights don't dim, the script would become rather complicated. You would need to adapt the script for watching TV in MythTV and any other media application you wanted to use.
With Linux MCE, you just listen for the the start and stop DCE events in a small module, and send out DCE events for the light control. For this one task, you can still just write a script. But you might also want to notify yourself of a call and pause the media player based on who is calling. You can do this with Asterisk and MythTV without a DCERouter, but you need to learn about how Asterisk handles events and MythTV handled OSD notifications; and, you need to write a notifier for Xine because it doesn't have built in notifications. With LinuxMCE you only have to learn a single interface, DCE, and you simply intercept the DCE message sent from Asterisk, then send a DCE message out to the Orbiter UI, and send out a pause DCE message to all media players. This means that these tasks can all be handled with just some knowledge of the DCE rather than learning a bunch of protocols and APIs. The "Devices" handle the translation of DCE messages for all the applications involved, for the various APIs, and the remote control protocols.
Ordinary users that have no programming knowledge can just hook up events using a tool provided by Pluto, but the good news for programmers is that they don't need domain knowledge of all the different applications they wish to integrate. All that is needed is a basic knowledge of DCE messages, and optionally, the Orbiter overlay UI.

DCE does what DBUS and many other protocols were supposed to do, but in contrast, it works. With the wrappers that we inherited from Pluto for various applications, applications don't need to commit to DCE or DBUS or any other protocol for LinuxMCE to communicate with them. DCE messages work today.



Programmer's Guide Sections